The causal relationship between autoimmune thyroid disorders and telomere length: A Mendelian randomization and colocalization study.

This study aimed to evaluate whether there is a causal relationship between autoimmune thyroid disorders (AITDs) and telomere length (TL) in the European population and whether there is reverse causality. In this study, Mendelian randomization (MR) and colocalization analysis were conducted to assess the potential causal relationship between AITDs and TL using summary statistics from large-scale genome-wide association studies, followed by analysis of the relationship between TL and thyroid stimulating hormone and free thyroxine (FT4) to help interpret the findings. The inverse variance weighted (IVW) method was used to estimate the causal estimates. The weighted median, MR-Egger and leave-one-out methods were used as sensitivity analyses. The IVW method results showed a significant causal relationship between autoimmune hyperthyroidism and TL (ß = -1.93 × 10-2 ; p = 4.54 × 10-5 ). There was no causal relationship between autoimmune hypothyroidism and TL (ß = -3.99 × 10-3 ; p = 0.324). The results of the reverse MR analysis showed that genetically TL had a significant causal relationship on autoimmune hyperthyroidism (IVW: odds ratio (OR) = 0.49; p = 2.83 × 10-4 ) and autoimmune hypothyroidism (IVW: OR = 0.86; p = 7.46 × 10-3 ). Both horizontal pleiotropy and heterogeneity tests indicated the validity of our bidirectional MR study. Finally, colocalization analysis suggested that there were shared causal variants between autoimmune hyperthyroidism and TL, further highlighting the robustness of the results. In conclusion, autoimmune hyperthyroidism may accelerate telomere attrition, and telomere attrition is a causal factor for AITDs.

Preparation of light-colored bio-based particles by isocyanate-modified lignins and its application for tetracycline adsorption.

A practical method for the preparation of lignin derivatives-light-colored bio-based particles (LC-BP) via the modification of hexamethylene diisocyanate (HDI) is presented in this work. In the mixed EtOH/H2O system, the change of solvent polarity induced the self-assembly of the lignosulfonate (LS) with the hydrophobic chromophores encapsulated inside the particles. The color of LS was reduced by the polymerization between the isocyanate groups (-N=C=O) of HDI and hydroxy groups of LS. Compared with the typical lignin-based adsorbent preparation process in the past, this is a simple, direct, and efficient preparation method and the synthetic LC-BP has good chemical stability and resistance to heat, acid and alkali. This effectively solves the problem that LS has high water solubility and is difficult to use directly for wastewater treatment. To investigate the properties, the synthetic LC-BP was characterized by SEM, specific surface area, L*a*b* (CIELAB) color space, FT-IR, XPS, and TGA. The results showed that the LC-BP exhibited obvious advantages in color reduction with a low CIE-L* value. The LC-BP exhibits a scale-like intercalation structure, which makes it a promising candidate for adsorbing tetracycline (TC) from wastewater. The conditions of pH, adsorbent dosages, adsorption time, and initial TC concentration were investigated, and the adsorption performance of LC-BP for TC was significantly better than that of conventional polyurethane particles (PP). The adsorption fitted the Langmuir model and there were hydrogen bonding, π-π conjugated binding, and electrostatic attraction during the absorption process. The adsorption capacity was up to 53.1 mg/g, and the removal rate was 67 %. The utilization of LC-BP, a low-cost, effective, and renewable resource derived from natural biomass, holds immense practical and economic potential in wastewater treatment.

Association Between Educational Attainment and Thyroid Function: Results From Mendelian Randomization and the NHANES Study.

CONTEXT: Many observational studies have reported on the association between educational attainment (EA) and thyroid function, but the causal relationship remains unclear. OBJECTIVE: We aimed to obtain causal effects of EA on thyroid function and to quantify the mediating effects of modifiable risk factors. METHODS: Two-sample mendelian randomization (MR) was performed by using summary statistics from large genome-wide association studies (GWAS) to assess the effect of EA on thyroid function, including hypothyroidism, hyperthyroidism, thyrotropin (TSH), and free thyroxine (FT4). A multivariable analysis was conducted to assess the mediating role of smoking and help to explain the association between EA and thyroid function. Similar analysis was further performed using data from the National Health and Nutrition Examination Survey (NHANES) 1999 to 2002. RESULTS: In MR analysis, EA was causally associated with TSH (ß = .046; 95% CI, 0.015-0.077; P = 4.00 × 10-3), rather than hypothyroidism, hyperthyroidism, and FT4. Importantly, smoking could serve as a mediator in the association between EA and TSH, in which the mediating proportion was estimated to be 10.38%. After adjusting for smoking in the multivariable MR analysis, the ß value of EA on TSH was attenuated to 0.030 (95% CI, 0.016-0.045; P = 9.32 × 10-3). Multivariable logistic regression model in NHANES suggested a dose-response relationship between TSH (quartile [Q]4 vs Q1: odds ratio = 1.33; 95% CI, 1.05-1.68; P for trend = .023) and EA. Smoking, systolic blood pressure, and body mass index partially mediated the association between EA and TSH, with the proportion of the mediation effects being 43.82%, 12.28%, and 6.81%, respectively. CONCLUSION: There is a potentially causal association between EA and TSH, which could be mediated by several risk factors, such as smoking.

Production of Cellulose Pulp and Lignin from High-Density Apple Wood Waste by Preimpregnation-Assisted Soda Cooking.

Apple wood waste (AWW), mainly tree trucks, is collectible lignocellulosic biomass from orchard rotation. The biorefinery of AWW is challenging because of the hard and dense structure. In the present work, chemical composition determination and microstructure observation was performed for the first time on AWW. Alkali-preimpregnation-assisted soda cooking (APSC) was developed to separate cellulose a pulp and lignin from AWW. APSC attained pulp yield of 34.2% at 23% NaOH, showing a 13.2% improvement compared to conventional soda cooking (SC). Fiber length analysis showed APSC-AWW pulp consisted mainly of medium and short fibers, which means blending with long-fibered pulp to enhance the physical strength of pulp sheets. A blend of APSC-AWW pulp and long-fibered pulp in the proportion of 80:20 attained comparable physical strength to hardwood kraft pulp. ASPC-AWW lignin was separated from spent liquor by acidification and then purified by dialysis desalination. The purified ASPC-AWW lignin showed a weight-average molecular weight of 4462 g/mol, similar to softwood kraft lignin but more uniform. Structural analysis revealed that ASPC-AWW lignin was composed of a syringyl unit (S), guaiacyl unit(G), and p-hydroxyphenyl unit (H), and an S unit was dominant with an S/G/H ratio of 74.5:18.2:7.3. It is believed the utilization of fruit tree wood waste as the feedstock of biorefinery is attractive to countries without sufficient forestry resources. Furthermore, the developed APSC is based on conventional SC, which ensures the feasibility of an industrial application.

Association Between Systemic Lupus Erythematosus and Primary Hypothyroidism: Evidence from Complementary Genetic Methods.

INTRODUCTION: Systemic lupus erythematosus (SLE) and hypothyroidism often coexist in observational studies; however, the causal relationship between them remains controversial. METHODS: Complementary genetic approaches, including genetic correlation, Mendelian randomization (MR), and colocalization analysis, were conducted to assess the potential causal association between SLE and primary hypothyroidism using summary statistics from large-scale genome-wide association studies. The association between SLE and thyroid-stimulating hormone (TSH) was further analyzed to help interpret the findings. In addition, findings were verified using a validation data set, as well as through different MR methods with different model assumptions. RESULTS: The linkage disequilibrium score regression revealed a shared genetic structure between SLE and primary hypothyroidism, with the significant genetic correlation estimated to be 0.2488 (P = 6.00 × 10-4). MR analysis with the inverse variance weighted method demonstrated a bidirectional causal relationship between SLE and primary hypothyroidism. The odds ratio (OR) of SLE on primary hypothyroidism was 1.037 (95% CI, 1.013-1.061; P = 2.00 × 10-3) and that of primary hypothyroidism on SLE was 1.359 (95% CI, 1.217-1.520; P < 0.001). The OR of SLE on TSH was 1.007 (95% CI, 1.001-1.013; P = 0.032). However, TSH was not causally associated with SLE (P = 0.152). Similar results were found using different MR methods. In addition, colocalization analysis suggested that shared causal variants existed between SLE and primary hypothyroidism. The results of the validation analysis indicated a bidirectional causal relationship between SLE and primary hypothyroidism, as well as shared loci. CONCLUSION: In summary, a bidirectional causal relationship between SLE and primary hypothyroidism was observed with complementary genetic approaches.

Self-Assembly Preparation of Nano-Lignin/Cationic Polyacrylamide Complexes.

The present work describes the preparation of nano-lignin particles from calcium lignosulfonate (CL). The nano-lignin was fabricated from colloidal lignin-polyacrylamide complexes via self-assembly. The sizes of the nano-lignin particles were examined by dynamic light scattering (DLS) and scanning electron microscopy (SEM). The results indicated that the average particle size of the prepared nano-lignin was approximately 100 nm. In addition, the obtained nano-lignin exhibited enhanced fluorescence intensity when compared with the original lignin, which might represent a potential application of this nano-particle product.

Mild and efficient extraction of hardwood hemicellulose using recyclable formic acid/water binary solvent.

Formic acid/water binary solvent extraction with formic acid fraction lower than 77.5% (w/w) of azeotrope was used to extract hemicellulose-derived saccharides from poplar wood at various levels of severity. The highest xylose yield of 77.8% and arabinose yield of 93.5% were obtained at 120 °C and 1 h. To reduce cellulose hydrolysis and facilitate downstream xylose crystallization, mild conditions at 90 °C and 4 h was chosen as optimum severity, which led to the highest xylose fraction of 81.7% in all saccharides extracted, with a remarkable xylose yield of 73.1%. Mass balance analysis showed that 5.84% of xylan was degraded, but only 0.25% of xylan ended up as furfural at optimum severity. The proposed extraction process has high feasibility for industrial application since the low formic acid fraction in solvent allows simple recovery and concentration of used solvent.

Separation of saccharides from prehydrolysis liquor of lignocellulose to upgrade dissolving pulp mill into biorefinery platform.

In this work, a competitive process consisting of polyelectrolyte flocculation, active carbon absorption, and ion exchange was developed for hemicelluloses-derived saccharides (HDSs) purification from prehydrolysis liquor (PHL) of lignocellulose. Results showed that colloidal lignin counted for 20% of non-saccharide compounds (NSCs) and could be eliminated by flocculation at 500mg/L polyaluminium chloride and 50mg/L anionic polyacrylamide. Active carbon was very effective for decoloration of flocculation-treated PHL, but showed limited absorption selectivity toward NSCs. Lignin, the dominant component of NSCs, is characterized with phenolic hydrogen groups. Phenolic lignin could be easily captured by anion exchange resin with 80% removal. The proposed process showed great industrial potential because of the high value saccharides, but also low molecular phenolic lignin.

Separation of hemicellulose-derived saccharides from wood hydrolysate by lime and ion exchange resin.

A combined process of lime treatment and mixed bed ion exchange was proposed to separate hemicellulose-derived saccharides (HDS) from prehydrolysis liquor (PHL) of lignocellulose as value added products. The optimization of lime treatment achieved up to 44.2% removal of non-saccharide organic compounds (NSOC), mainly colloidal substances, with negligible HDS degradation at 0.5% lime level and subsequent neutralization by phosphoric acid. The residual NSOC and calcium ions in lime-treated PHL were eliminated by mixed bed ion exchange. The breakthrough curves of HDS and NSOC showed selective retention toward NSOC, leading to 75% HDS recovery with 95% purity at 17 bed volumes of exchange capacity. In addition, macroporous resin showed higher exchange capacity than gel resin as indicated by the triple processing volume. The remarkable selectivity of the combined process suggested the feasibility for HDS separation from PHL.

Evaluation energy efficiency of bioconversion knot rejects to ethanol in comparison to other thermochemically pretreated biomass.

Rejects from sulfite pulp mill that otherwise would be disposed of by incineration were converted to ethanol by a combined physical-biological process that was comprised of physical refining and simultaneous saccharification and fermentation (SSF). The energy efficiency was evaluated with comparison to thermochemically pretreated biomass, such as those pretreated by dilute acid (DA) and sulfite pretreatment to overcome recalcitrance of lignocelluloses (SPORL). It was observed that the structure deconstruction of rejects by physical refining was indispensable to effective bioconversion but more energy intensive than that of thermochemically pretreated biomass. Fortunately, the energy consumption was compensated by the reduced enzyme dosage and the elevated ethanol yield. Furthermore, adjustment of disk-plates gap led to reduction in energy consumption with negligible influence on ethanol yield. In this context, energy efficiency up to 717.7% was achieved for rejects, much higher than that of SPORL sample (283.7%) and DA sample (152.8%).