Fenton-like Degradation of Methylene Blue on Attapulgite Clay Composite by Loading of Iron-Oxide: Eco-Friendly Preparation and Its Catalytic Activity.

The continuous discharge of organic dyes into freshwater resources poses a long-term hazard to aquatic life. The advanced oxidation Fenton process is a combo of adsorption and degradation of pollutants to detoxify toxic effluents, such as anti-bacterial drugs, antibiotics, and organic dyes. In this work, an activated attapulgite clay-loaded iron-oxide (A-ATP@Fe3O4) was produced using a two-step reaction, in which attapulgite serves as an enrichment matrix and Fe3O4 functions as the active degrading component. The maximum adsorption capacity (qt) was determined by assessing the effect of temperature, pH H2O2, and adsorbent. The results showed that the A-ATP@Fe3O4 achieves the highest removal rate of 99.6% under optimum conditions: 40 °C, pH = 3, H2O2 25 mM, and 0.1 g dosage of the composite. The dye removal procedure achieved adsorption and degradation equilibrium in 120 and 30 min, respectively, by following the same processes as the advanced oxidation approach. Catalytic activity, kinetics, and specified surface characteristics suggest that A-ATP@Fe3O4 is one of the most promising candidates for advanced oxidation-enrooted removal of organic dyes.

Enhanced dispersion of prussian blue via intercalation into layered double hydroxides for efficient solar seawater evaporation.

Prussian blue (PB) is favored for its photothermal absorption capability in solar vapor generation applications. However, the photothermal conversion efficiency of current PB-based devices is limited by the material's poor dispersion. Herein, we report a method of incorporating PB in the interlayers of layered double hydroxides (LDHs) to prevent its aggregation. The dispersion is further enhanced and stabilized by the addition of sodium dodecyl sulfate (SDS). The thermal and water stability of PB is improved due to the rigid structure of LDHs and interactions between layers and anions. Elemental analysis confirms that with the increase of molar ratio of Mg/Al and the introduction of SDS, concentrations of PB are decreased accordingly. As a result, the rate of solar vapor generation is increased by 35.9% for powders containing 50 mg of equivalent PB. Of note, converting this material into a three-dimensional structure of high rebound foam further enhances solar water evaporation rate, from 0.79 kg m-2 h-1 to 0.98 kg m-2 h-1, with only 20 mg of equivalent PB, increasing the corresponding photothermal conversion efficiency from 53.8% to 66.3%.

Intelligent Gas Detection: g-C3N4/Polypyrrole Decorated Alginate Paper as Smart Selective NH3/NO2 Sensors at Room Temperature.

Chemiresistive NH3/NO2 sensors are attracting considerable attention for use in air-conditioning systems. However, the existing sensors suffer from cross-sensitivity, detection limit, and power consumption, owing to the inadequate charge-transfer ability of gas-sensing materials. Herein, we develop a flexible NH3/NO2 sensor based on graphitic carbon nitride/polypyrrole decorated alginate paper (AP@g-CN/PPy). The flexible sensor can work at room temperature and exhibits a positive response of 23-246% and a negative response of 37-262% toward 0.1-5 ppm of NH3 and NO2, which is ∼4.5 times and ∼7.0 times higher than a pristine PPy sensor. Moreover, the sensor exhibits flexibility, reproducibility, long-term stability, anti-interference, and high resilience to humidity, indicating its promising potential in real applications. Using the 9 feature parameters extracted from the transient response, a matched deep learning model was developed to achieve qualitative recognition of different types of gases with distinguished decision boundaries. This work not only provides an alternative gas-sensing material for dual NH3/NO2 sensing but also establishes an intelligent strategy to identify hazardous gases under an interfering atmosphere.

Nomogram for predicting intolerable postoperative early enteral nutrition following definitive surgery for small intestinal fistula: a cohort study.

BACKGROUND: This study was designed to develop and validate a nomogram for predicting intolerable early enteral nutrition (EEN) following definitive surgery (DS) for small intestinal fistula. METHODS: A total of 377 patients, recruited from January 2016 to September 2023, was randomly allocated into development (n=251) and validation (n=126) groups in a 2:1 ratio. Risk factors were identified using the nomogram. Its performance was assessed based on calibration, discrimination, and clinical utility, with validation confirming its effectiveness. RESULTS: Of the 377 patients, 87 (23.1%) were intolerant to EEN, including 59 (23.1%) in the development cohort and 28 (22.1%) in the validation cohort (P=0.84). Four factors were identified as predictive of intolerable EEN: severe abdominal adhesion, deciliter of blood loss during DS, human serum albumin (Alb) input >40 g during and within 48 hours post-DS, and the visceral fat area (VFA)/total abdominal muscle area index (TAMAI) ratio. The model demonstrated excellent discrimination, with a C-index of 0.79 (95% CI, 0.74-0.87, including internal validation) and robust calibration. In the validation cohort, the nomogram showed strong discrimination (C-index=0.77; 95% CI, 0.64-0.87) and solid calibration. Decision curve analysis affirmed the nomogram's clinical utility. CONCLUSION: This research introduces a nomogram that enables the individualized prediction of intolerable EEN following DS for small intestinal fistula, demonstrating a possible clinical utility.

Colloid Mill-Assisted Ultrasonic-Fractional Centrifugal Purification of Low-Grade Attapulgite and Its Modification for Adsorption of Congo Red.

Attapulgite (APT) is widely used in wastewater treatment due to its exceptional adsorption and colloidal properties, as well as its cost-effectiveness and eco-friendliness. However, low-grade APT generally limits its performance. Here, a colloid mill-assisted ultrasonic-fractional centrifugal purification method was developed to refine low-grade APT. This process successfully separated and removed impurity minerals such as quartz and dolomite from the raw ore, resulting in a refined APT purity increase from 16.9% to 60% with a specific surface area of 135.5 m2∙g-1. Further modifying of the refined APT was carried out through the hydrothermal method using varying dosages of cetyltrimethylammonium chloride (CTAC), resulting in the production of four different APT adsorbents denoted as QAPT-n (n = CTAC mole number) ranging from 0.5 to 5 mmol. Using Congo red (CR) as the target pollutant, the QAPT-5 sample exhibited the best adsorption capacity with the maximum quantity of 1652.2 mg∙g-1 in a neutral solution at 30 °C due to the highest surface charge (zeta potential = 8.25 mV). Moreover, the QAPT-5 pellets (~2.0 g adsorbent) shaped by the alginate-assisted molding method removed more than 96% of 200 mL aqueous solution containing 200 mg∙L-1 CR and maintained this efficiency in 10 adsorption-elution cycles, which exhibited the promising practical application.

Shared genetic architecture highlights the bidirectional association between major depressive disorder and fracture risk.

Background: There is limited evidence suggesting that osteoporosis might exacerbate depressive symptoms, while more studies demonstrate that depression negatively affects bone density and increases fracture risk. Aims: To explore the relationship between major depressive disorder (MDD) and fracture risk. Methods: We conducted a nested case-control analysis (32 670 patients with fracture and 397 017 individuals without fracture) and a matched cohort analysis (16 496 patients with MDD and 435 492 individuals without MDD) in the same prospective UK Biobank data set. Further, we investigated the shared genetic architecture between MDD and fracture with linkage disequilibrium score regression and the MiXeR statistical tools. We used the conditional/conjunctional false discovery rate approach to identify the specific shared loci. We calculated the weighted genetic risk score for individuals in the UK Biobank and logistic regression was used to confirm the association observed in the prospective study. Results: We found that MDD was associated with a 14% increase in fracture risk (hazard ratio (HR) 1.14, 95% CI 1.14 to 1.15, p<0.001) in the nested case-control analysis, while fracture was associated with a 72% increase in MDD risk (HR 1.72, 95% CI 1.64 to 1.79, p<0.001) in the matched cohort analysis, suggesting a longitudinal and bidirectional relationship. Further, genetic summary data suggested a genetic overlap between MDD and fracture. Specifically, we identified four shared genomic loci, with the top signal (rs7554101) near SGIP1. The protein encoded by SGIP1 is involved in cannabinoid receptor type 1 signalling. We found that genetically predicted MDD was associated with a higher risk of fracture and vice versa. In addition, we found that the higher expression level of SGIP1 in the spinal cord and muscle was associated with an increased risk of fracture and MDD. Conclusions: The genetic pleiotropy between MDD and fracture highlights the bidirectional association observed in the epidemiological analysis. The shared genetic components (such as SGIP1) between the diseases suggest that modulating the endocannabinoid system could be a potential therapeutic strategy for both MDD and bone loss.

Relationship of various COVID-19 antibody titer with individual characteristics and prediction of future epidemic trend in Xiamen City, China.

Background: Reinfection of coronavirus disease 2019 (COVID-19) has raised concerns about how reliable immunity from infection and vaccination is. With mass testing for the virus halted, understanding the current prevalence of COVID-19 is crucial. This study investigated 1,191 public health workers at the Xiamen Center for Disease Control, focusing on changes in antibody titers and their relationship with individual characteristics. Methods: The study began by describing the epidemiological characteristics of the study participants. Multilinear regression (MLR) models were employed to explore the associations between individual attributes and antibody titers. Additionally, group-based trajectory models (GBTMs) were utilized to identify trajectories in antibody titer changes. To predict and simulate future epidemic trends and examine the correlation of antibody decay with epidemics, a high-dimensional transmission dynamics model was constructed. Results: Analysis of epidemiological characteristics revealed significant differences in vaccination status between infected and non-infected groups (χ2=376.706, P<0.05). However, the distribution of antibody titers among the infected and vaccinated populations was not significantly different. The MLR model identified age as a common factor affecting titers of immunoglobulin G (IgG), immunoglobulin M (IgM), and neutralizing antibody (NAb), while other factors showed varying impacts. History of pulmonary disease and hospitalization influenced IgG titer, and factors such as gender, smoking, family history of pulmonary diseases, and hospitalization impacted NAb titers. Age was the sole determinant of IgM titers in this study. GBTM analysis indicated a "gradual decline type" trajectory for IgG (95.65%), while IgM and NAb titers remained stable over the study period. The high-dimensional transmission dynamics model predicted and simulated peak epidemic periods in Xiamen City, which correlated with IgG decay. Age-group-specific simulations revealed a higher incidence and infection rate among individuals aged 30-39 years during both the second and third peaks, followed by those aged 40-49, 50-59, 18-29, and 70-79 years. Conclusions: Our study shows that antibody titer could be influenced by age, previous pulmonary diseases as well as smoking. Furthermore, the decline in IgG titers is consistent with epidemic trends. These findings emphasize the need for further exploration of these factors and the development of optimized self-protection countermeasures against reinfection.

A MOF nanoparticle@carbon aerogel integrated photothermal catalytic microreactor for CO2 utilization.

A practical carbon dioxide (CO2) conversion and utilization system shows great potential for ameliorating the greenhouse effect. Herein, an integrated carbon aerogel-based photothermal catalysis microreactor with photothermal conversion, enhanced mass transfer adsorption and a thermal catalytic reactor is designed. As a solar-powered CO2 utilization module, this microreactor can conveniently convert CO2 into economically valuable products without elaborate equipment and operation processes.

Designing a bi-layer multifunctional hydrogel patch based on polyvinyl alcohol, quaternized chitosan and gallic acid for abdominal wall defect repair.

In abdominal wall defect repair, surgical site infection (SSI) remains the primary cause of failure, while complications like visceral adhesions present significant challenges following patch implantation. We designed a Janus multifunctional hydrogel patch (JMP) with antibacterial, anti-inflammatory, and anti-adhesive properties. The patch comprises two distinct layers: a pro-healing layer and an anti-adhesion layer. The pro-healing layer was created by a simple mixture of polyvinyl alcohol (PVA), quaternized chitosan (QCS), and gallic acid (GA), crosslinked to form PVA/QCS/GA (PQG) hydrogels through GA's self-assembly effect and hydrogen bonding. Additionally, the PVA anti-adhesive layer was constructed using a drying-assisted salting method, providing a smooth and dense physical barrier to prevent visceral adhesion while offering essential mechanical support to the abdominal wall. The hydrogel patch demonstrates widely adjustable mechanical properties, exceptional biocompatibility, and potent antimicrobial properties, along with a sustained and stable release of antioxidants. In rat models of skin and abdominal wall defects, the JMP effectively promoted tissue healing by controlling infection, inhibiting inflammation, stimulating neovascularization, and successfully preventing the formation of visceral adhesions. These compelling results highlight the JMP's potential to improve the success rate of abdominal wall defect repair and reduce surgical complications.

Screening and experimental validation of diagnostic gene in ulcerative colitis with anti-TNF-α therapy.

In clinical practice, the diagnosis of ulcerative colitis (UC) mainly relies on a comprehensive analysis of a series of signs and symptoms of patients. The current biomarkers for diagnosis of UC and prognostic prediction of anti-TNF-α therapy are inaccurate. The present study aimed to perform an integrative analysis of gene expression profiles in patients with UC. A total of seven datasets from the GEO database that met our strict inclusion criteria were included. After identifying differentially expressed genes (DEGs) between UC patients and healthy individuals, the diagnostic and prognostic utility of the DEGs were then analyzed via least absolute shrinkage and selection operator and support-vector machine recursive feature elimination. Subgroup analyses of the treated and untreated groups, as well as the treatment-response group and non-response group, were also performed. Furthermore, the relationship between the expressions of UC-related genes and infiltration of immune cells in the course of treatment was also investigated. Immunohistochemical (IHC) assay was used to verify the gene expression in inflamed UC tissues. When considering all the applied methods, DUOX2, PI3, S100P, MMP7, and S100A8 had priority to be defined as the characteristic genes among DEGs. The area under curve (AUC) of the five genes, which were all consistently over-expressed, based on an external validation dataset, were all above 0.94 for UC diagnosis. Four of the five genes (DUOX2, PI3, MMP7, and S100A8) were down-regulated between treatment-responsive and nonresponsive patients. A significant difference was also observed concerning the infiltration of immune cells, including macrophage and neutrophil, between the two groups (treatment responsive and nonresponsive). The changes in the expression of DUOX2 and MMP7 based on the IHC assay were highly consistent with the results obtained in the current study. This confirmed the mild to moderate diagnostic and predictive value of DUOX2 and MMP7 in patients with UC. The conducted analyses showed that the expression profile of the five identified biomarkers accurately detects UC, whereas four of the five genes evidently predicted the response to anti-TNF-α therapy.

Comparative efficacy of sequential treatment and open abdomen approaches for corrosive abdominal hemorrhage due to inadequate drainage of duodenal leakage: a cohort study.

BACKGROUND: Intra-abdominal bleeding resulting from inadequate drainage of duodenal leakage (DL) is typically caused by the corrosiveness of duodenal fluid. Open abdomen (OA) treatment addresses both the drainage and bleeding simultaneously. However, a sequential treatment (ST) approach involving hemostasis through transcatheter arterial embolization (TAE) followed by percutaneous drainage of source control has emerged as an alternative method. This study aimed to evaluate the prognosis of ST in cases of DL-induced intra-abdominal bleeding. METHODS: This retrospective cohort study included 151 participants diagnosed with DL-induced intra-abdominal bleeding from January 2004 to December 2010, and January 2013 to December 2021. The ST and OA groups were established based on the treatment method applied. Propensity score-matching (PSM) matched patients in the ST group with those in the OA group. RESULTS: Among the 151 patients, 61 (40.4%) died within 90 days after the bleeding episode. ST was associated with a lower mortality rate (28.2% vs. 51.3% adjusted odds ratio [OR] = 0.34; 95% confidence interval [CI] 0.17-0.68; P = 0.003) compared to OA. Following PSM, ST remained the only factor associated with reduced mortality (OR = 0.32; 95% CI 0.13-0.75; P = 0.009). Moreover, ST demonstrated a higher rate of initial hemostasis success before (90.1% [64/71] vs. 77.5% [62/80]; adjusted OR = 2.84; 95% CI 1.07-7.60; P = 0.04) and after PSM (94.4% [51/54] vs. 77.8% [42/54], adjusted OR = 3.85; 95% CI 2.15-16.82; P = 0.04). Additionally, ST was associated with a lower incidence of rebleeding within 90 days after the initial bleeding, before (7 vs. 23; adjusted OR 0.41; 95% CI 0.18-0.92; P = 0.03) and after PSM (5 vs. 14; adjusted OR 0.37; 95% CI 0.15-0.93; P = 0.03). CONCLUSIONS: Applying ST involving TAE and subsequent percutaneous drainage might be superior to OA in lowering the mortality in DL-induced intra-abdominal hemorrhage.

An alternative negative pressure treatment for enteroatmospheric fistula resulting from small intestinal leakage caused by incision dehiscence.

Background: To investigate the efficacy of an alternative negative pressure treatment for the treatment of enteroatmospheric fistula transformed from small intestinal leakage due to incision dehiscence after abdominal surgery. Methods: Patients with an enteroatmospheric fistula from small intestinal leakage owing to incision dehiscence following abdominal surgery between January 2010 and December 2019 were retrospectively reviewed. Results: A total of 83 patients (mean age: 38.3 ± 11.6 years; Body mass index: 19.9 ± 2.2 kg/m2) were enrolled. Of the 83 patients, 59 (71.1 %) achieved fistula closure. High-output fistula (Hazard ratio = 0.48; 95 % Confidence interval: 0.29-0.81; P = 0.006) and abdominal wall thickness >2 cm (Hazard ratio = 2.76; 95 % Confidence interval: 1.35-5.67; P = 0.006) were identified as factors affecting fistula closure. Lastly, 11/83 (13.3 %) patients exhibited re-dehiscence. Conclusion: Appropriately applying the alternative negative pressure treatment may enable fistula closure in patients with enteroatmospheric fistula resulting from small intestinal leakage caused by incision dehiscence.

High visceral fat-to-muscle ratio predicated a recurrent fistula after definitive surgery for a small intestinal fistula with diffuse extensive abdominal adhesions: a cohort study.

BACKGROUND: In patients diagnosed with sarcopenia, the presence of chronic preoperative inflammation, assessed by the ratio of the visceral fat area (VFA) to the total abdominal muscle area index (TAMAI) (VFA/TAMAI), has been found to adversely affect wound healing. An elevated VFA/TAMAI may contribute to a higher incidence of postoperative recurrent fistulas (RFs) following definitive surgery (DS) for small intestinal fistulas accompanied by diffuse extensive abdominal adhesions. The objective of this study was to evaluate the predictive value of VFA/TAMAI for postoperative RFs. METHODS: The study enrolled 183 sarcopenic patients, with a median age of 51 years [interquartile range (IQR): 38-61 years), a median body mass index of 19.6 kg/m 2 (IQR: 18.9-21.0 kg/m 2 ) who underwent DS for small intestinal fistulas between January 2018 and October 2022 were included in the multicenter study. The outcomes assessed were RFs and postoperative length of stay (LOS). VFA/TAMAI was examined as a potential risk factor for each outcome. RESULTS: Out of the 183 patients, 20.2% ( n =37) developed RFs. The multivariate regression analysis identified VFA/TAMAI as the sole factor associated with RFs [odds ratio=1.78, 95% confidence interval (CI): 1.09-2.87, P =0.02]. The multivariable Cox regression analysis demonstrated that an elevated VFA/TAMAI was linked to a reduced postoperative LOS (hazard ratio=0.69, 95% CI: 0.59-0.81, P <0.001). CONCLUSION: In sarcopenic patients, a high VFA/TAMAI predicated the occurrence of RFs after DS for small intestinal fistulas in the presence of diffuse extensive abdominal adhesions.

Biomimetic Two-Dimensional Vermiculite Nanofluidic Membranes for Stable Salinity-Gradient Energy Conversion.

Aligned ion transport in the nanofluidic membrane is promising for efficient salinity-gradient energy conversion, while remaining rather challenging due to relatively inadequate mass transport and long-time durability. In this work, wet-chemically exfoliated and negatively charged vermiculite lamellas are readily restacked into free-standing membranes with massive arrays of nanochannels and a three-dimensional interface. The resulting vermiculite nanofluidic membranes possess excellent stability against harsh conditions including a wide pH range and high temperature and exhibit a different ion transport behavior from the macroscopic one due to the surface-charge-governed conductivity. The ionic conductivity is several orders of magnitude higher than that of the native solution at low concentrations. Moreover, the negatively charged lamellas create a space charge zone, making the nanofluidic membrane capable of coupling surface charge and space charge in confinement for salinity-gradient energy conversion from seawater and freshwater. Compared with other layered materials, the vermiculite-derived membranes have distinct advantages such as low cost, facile fabrication, and high stability. This work provides a new idea for designing nanofluidic membranes from phyllosilicate minerals, which offers opportunities for manufacturing nanofluidic devices.

Effect of postoperative utilization of somatostatin on clinical outcome after definitive surgery for duodenal fistula.

PURPOSE: To evaluate the effect of postoperative utilization of somatostatin after definitive surgery for duodenal fistula (DF) in preventing a recurrence. METHODS: Patients with definitive surgery for DF between January 2010 and December 2021 were categorized based on the utilization of somatostatin or not after the surgery. Patients in the Somatostatin group were matched to those in the Non-somatostatin group using propensity scores matching (PSM), so as to evaluate the effect of postoperative use of somatostatin by comparing the two groups. RESULTS: A total of 154 patients were divided into the in the Somatostatin group (84) and the Non-somatostatin group (70). Forty-three patients (27.9%) exhibited a recurrent fistula, with which the postoperative use of somatostatin was not associated (19 [22.6%] in the Somatostatin group and 24 (34.3%) in the Non-somatostatin group; unadjusted OR 0.56; 95% CI 0.28-1.14; P = 0.11). However, the postoperative usage of somatostatin served as a protective factor for developing into high-output recurrent fistula (eight (13.3%) in the Somatostatin group and 15 (25%) in the Non-somatostatin group; adjusted OR 0.39; 95% CI 0.15-0.93; P = 0.04). After PSM, the recurrent fistula occurred in 29.2% subjects (35/120). The postoperative usage of somatostatin was not associated with recurrent fistula (13 in PSM Somatostatin group vs. 22 in PSM Non-somatostatin group; unadjusted OR 0.48; 95% CI 0.21-1.07; P = 0.07), while its postoperative usage decreased the incidence of recurrent high-output fistula (5/60 in the PSM Somatostatin group, compared with 13/60 in the PSM Non-somatostatin group; adjusted OR 0.30; 95% CI 0.09-0.95). CONCLUSION: Postoperative use of somatostatin could effectively reduce the incidence of recurrent high-output fistula, without association with overall incidence of postoperative recurrent fistula.

Room-Temperature Optoelectronic Gas Sensor Based on Core-Shell g-C3N4@WO3 Heterocomposites for Efficient Ammonia Detection.

The ever-growing modern industry promotes the evolution of gas sensors for environmental monitoring and safety inspection. However, traditional chemiresistive gas sensors still suffer from drawbacks of high power consumption and detection limit, mainly due to the insufficient charge-transfer ability of gas-sensing materials. Here, an optoelectronic gas sensor that can detect ppb-level ammonia at room temperature is constructed based on core-shell g-C3N4@WO3 heterocomposites. The growth of WO3 nanosheets on graphitic g-C3N4 nanosheets was precisely controlled, achieving well-defined g-C3N4@WO3 core-shell architectures. Based on the synergism between light activation and the amplification effect of in situ-formed heterojunctions, the g-C3N4@WO3 sensor exhibits improved sensing characteristics for reliable ammonia detection. As compared with the pristine g-C3N4 sensor, the sensor response toward ammonia is enhanced 21 times and the detection limit is reduced from 308 to 108 ppb. This work provides a successful approach for the in situ formation of core-shell g-C3N4@WO3 interfacial composites and offers an easy solution for the rational design of advanced optoelectronic gas sensors.

Effect of placing double-lumen irrigation-suction tube on closure of anastomotic defect following rectal cancer surgery.

PURPOSE: This study aimed to investigate the effect of placement of double-lumen irrigation-suction tubes (DLIST) on the closure of anastomotic defect (AD) after rectal cancer surgery. METHODS: The study was carried out at two centers managed by one surgeon, both adopted the same treatments. Patients with postoperative AD after rectal cancer surgery from January 2011 to June 2020 were eligible and were divided into a passive drainage (PD) group and a DLIST group according to whether the PD, placed in the rectal cancer surgery, had been replaced with the DLIST. The effect of DLIST on the AL was evaluated. RESULT: There distributed 76 patients in the DLIST group and 52 in the PD group. A higher closure rate was reported in the DLIST group (46 patients in DLIST group, for a closure rate of 60.5%, and 21 patients in PD group, for a closure rate of 40.4%. HR = 3.05; 95% CI: 1.79-5.19; P < 0.001). Both length of stay and costs of the treatment in the DLIST group were lower (54 days [interquartile range, IQR: 41-17] days vs. 112 days [IQR: 66-27] days, P = 0.005; and $18,721 [IQR: $14,982-4,960] vs. $40,840 [IQR: $20,932-50,529], P < 0.001). CONCLUSION: Placement of DLIST might serve as an effective method for treating AD following rectal cancer surgery. In comparison with PD, it costs lower to apply DLIST in the treatment of AD and the length of stay is shorter.

Effect of preoperative predigested formula vs. polymeric formula on bowel function recovery after definitive surgery for small intestinal entero-atmospheric fistula in patients with chyme reinfusion.

Purpose: The purpose of this study is to compare the effect of preoperative predigested formula vs. polymeric formula on bowel function recovery following definitive surgery (DS) for small intestinal enteroatmospheric fistula (EAF). Methods: In this retrospective study, from January 2005 to December 2019, the patients with small intestinal EAF and receiving a DS were enrolled. During the preoperative treatment, each patient received enteral nutrition via nasojejunal feeding and chyme reinfusion. The enrolled subjects were classified into two groups, based on their formula type: polymeric formula and predigested formula. Then, propensity scores matching (PSM) was used to further divide these patients into PSM polymeric formula group or PSM predigested formula group. The clinical characteristics of the groups were analyzed. Result: A total of 137 patients were finally enrolled, with 72 patients in the polymeric formula group and 65 patients in predigested formula group. The postoperative ileus was manifested in a total of 61 (44.5%) cases, with 27 (37.5%) in the polymeric formula group and 34 (52.3%) in the predigested formula group (P = 0.04). It was predicted that the polymeric formula could result in a reduction in postoperative ileus (OR = 0.47; 95% CI: 0.21-0.95; P = 0.04). After 1:1 PSM, there were 110 patients included. The postoperative ileus was observed in 47 patients, with 18 (32.7%) in the polymeric formula group and 29 (52.7%) in the predigested formula group (P = 0.03). After PSM, the polymeric formula demonstrated a reduction in the incidence of postoperative ileus (OR = 0.42; 95% CI: 0.19-0.92; P = 0.03). Conclusion: Compared with predigested formula, the preoperative polymeric formula appears to be associated with earlier recovery of bowel function after DS for EAF.