RESUMO
Compared with the thermal curing process, the photocuring process has advantages such as high efficiency and less energy consumption. However, the preparation of photocurable phase change materials (PCMs) with photothermal conversion and self-cleaning properties is challenging due to the conflict between the transparency required by the photocurable resin system and the opacity deduced by the large number of fillers required by photothermal conversion and the negative effect of filler steric hindrance on the reaction rate and crystallinity. In this work, a "thiol-ene" click chemical reaction induced using UV was used to prepare photocurable PCMs, followed by spraying a carboxylated multiwalled carbon nanotube (CCNT) suspension (with ethyl acetate) onto the surface to achieve an effective two-layer composite of the PCM and CCNTs, by which the rough surface of the PCM and the interaction offered by the hydrogen bonds on the interface of the PCM and the CCNTs provide sufficient adhesion for the two phases. The "thiol-ene" cross-linked polymer network provided shape stability as a support material. 1-Octadectanethiol (ODT) and beeswax (BW) were encapsulated in the cross-linked polymer network as phase change components, providing phase change latent heat. The CCNT layer provided excellent photothermal conversion and self-cleaning properties. The experimental results show that the latent heat of the PCM can reach 124.2 J/g, the water contact angle is 144°, the photothermal conversion efficiency reaches 75%, and it has significant self-cleaning performance. To the best of our knowledge, this is the first report on a photocurable PCM with photothermal conversion and self-cleaning properties.
RESUMO
In this study, a temperature programmed oxidation-infrared (TPO-IR) technique was improved and applied in the analysis of sulfur occurrence and genesis in phosphate rock. Phosphate rocks from three regions (KYP, ZJP, and WAP) were selected for the detection of sulfur species by TPO-IR combined with XRD, SEM, EDS, and XPS characterization. TPO-IR results show that the total sulfur contents of the three phosphate rocks were 2.14% for KYP, 1.18% for ZJP, and 1.06% for WAP. In the low-temperature area (<1000°C), TPO-IR detected that both KYP and WAP contain FeS with a characteristic temperature of about 513°C and their contents were 9.22 and 0.64, respectively. In high-temperature areas (>1000°C), the TPO-IR curves suggest that sulfate is the main sulfur species in the three phosphate rocks. Typically, the characteristic temperature near 1070oC belongs to MgSO4, and the characteristic temperature near 1290°C belongs to CaSO4. Due to the incomplete TPO-IR database of sulfur reference materials at present, it is not possible to assign all sulfur species in high-temperature areas. However, in a sense, this research provides theoretical basis and experimental support for the application of the TPO-IR technique for the detection of sulfur species in other solid minerals.
RESUMO
As a p-type multifunctional semiconductor, CuSe nanostructures show great promise in optoelectronic, sensing, and photocatalytic fields. Although great progress has been achieved, controllable synthesis of CuSe nanosheets (NSs) with a desirable spacial orientation and open frameworks remains a challenge, and their use in supercapacitors (SCs) has not been explored. Herein, a highly vertically oriented and interpenetrating CuSe NS film with open channels is deposited on an Au-coated polyethylene terephthalate substrate. Such CuSe NS films exhibit high specific capacitance (209 F g-1) and can be used as a carbon black- and binder-free electrode to construct flexible, symmetric all-solid-state SCs, using polyvinyl alcohol-LiCl gel as the solid electrolyte. A device fabricated with such CuSe NS films exhibits high volumetric specific capacitance (30.17 mF cm-3), good cycling stability, excellent flexibility, and desirable mechanical stability. The excellent performance of such devices results from the vertically oriented and interpenetrating configuration of CuSe NS building blocks, which can increase the available surface and facilitate the diffusion of electrolyte ions. Moreover, as a prototype for application, three such solid devices in series can be used to light up a red light-emitting diode.
