Bioaugmented biological contact oxidation reactor for treating simulated textile dyeing wastewater.

In this study, modified polyamide fibers were used as biocarriers to enrich dense biofilms in a multi-stage biological contact oxidation reactor (MBCOR) in which partitioned wastewater treatment zone (WTZ) and bioaugmentation zone (BAZ) were established to enhance the removal of methyl orange (MO) and its metabolites while minimizing sludge yields. WTZ exhibited high biomass loading capacity (5.75 ± 0.31 g/g filler), achieving MO removal rate ranging from 68 % to 86 % under different aeration condition within 8 h in which the most dominant genus Chlorobium played an important role. In the BAZ, Pseudoxanthomonas was the dominant genus while carbon starvation stimulated the enrichment of chemoheterotrophy and aerobic_chemoheterotrophy genes thereby enhanced the microbial utilization of cell-released substrates, MO as well as its metabolic intermediates. These results revealed the mechanism bioaugmentation on MBCOR in effectively eliminating both MO and its metabolites.

Discovering Cathodic Biocompatibility for Aqueous Zn-MnO2 Battery: An Integrating Biomass Carbon Strategy.

Developing high-performance aqueous Zn-ion batteries from sustainable biomass becomes increasingly vital for large-scale energy storage in the foreseeable future. Therefore, γ-MnO2 uniformly loaded on N-doped carbon derived from grapefruit peel is successfully fabricated in this work, and particularly the composite cathode with carbon carrier quality percentage of 20 wt% delivers the specific capacity of 391.2 mAh g-1 at 0.1 A g-1, outstanding cyclic stability of 92.17% after 3000 cycles at 5 A g-1, and remarkable energy density of 553.12 Wh kg-1 together with superior coulombic efficiency of ~ 100%. Additionally, the cathodic biosafety is further explored specifically through in vitro cell toxicity experiments, which verifies its tremendous potential in the application of clinical medicine. Besides, Zinc ion energy storage mechanism of the cathode is mainly discussed from the aspects of Jahn-Teller effect and Mn domains distribution combined with theoretical analysis and experimental data. Thus, a novel perspective of the conversion from biomass waste to biocompatible Mn-based cathode is successfully developed.

Analysis on the stability of plankton in a food web with empirical organism body mass distribution.

The mechanism supporting the stability of complex food webs is an important, yet still controversial issue in ecology. Integrating the bioenergetic model with a natural plankton food web with empirical organism body mass distribution, we studied the effects of taxa diversity, nutrient enrichment simulation and connectance on the stability of plankton, and the underlying mechanisms. The behavior and functions of plankton with different body masses in the system were also explored. The results showed that genus richness promoted the temporal stability of community but reduced that of population. Meanwhile, the effects of taxon extinction on community biomass and temporal stability depended on the body masses of those lost taxa. Enrichment decreased phytoplankton and zooplankton community stability directly by increasing the temporal variability of biomass and indirectly by reducing taxa diversity. Enrichment preferentially caused phytoplankton taxa with the highest individual biomass to go extinct and the ones with smaller to increase in biomass. The effects, as well as the underlying mechanisms of connectance on phytoplankton and zooplankton stability were different. High connectance promoted the persistence and biomasses of both zooplankton and small-bodied phytoplankton but reduced those of larger-bodied phytoplankton. The results and methodology in this research will be helpful in understanding and analyzing the stability of plankton communities.

Impact of Fe and Ni Addition on the VFAs' Generation and Process Stability of Anaerobic Fermentation Containing Cd.

The effects of Cd, Cd + Fe, and Cd + Ni on the thermophilic anaerobic fermentation of corn stover and cow manure were studied in pilot experiments by investigating the biogas properties, process stability, substrate biodegradation, and microbial properties. The results showed that the addition of Fe and Ni into the Cd-containing fermentation system induced higher cumulative biogas yields and NH4+-N concentrations compared with the only Cd-added group. Ni together with Cd improved and brought forward the peak daily biogas yields, and increased the CH4 contents to 80.76%. Taking the whole fermentation process into consideration, the promoting impact of the Cd + Ni group was mainly attributed to better process stability, a higher average NH4+-N concentration, and increased utilization of acetate. Adding Fe into the Cd-containing fermentation system increased the absolute abundance of Methanobrevibacter on the 13th day, and Methanobrevibacter and Methanobacterium were found to be positively correlated with the daily biogas yield. This research was expected to provide a basis for the reuse of biological wastes contaminated by heavy metals and a reference for further studies on the influence of compound heavy metals on anaerobic fermentation.

Effect of Zn Addition on the Cd-Containing Anaerobic Fermentation Process: Biodegradation and Microbial Communities.

Anaerobic fermentation is considered as a cost-effective way of biomass waste disposal. However, the compound heavy metals contained in the biomass may induce complex effects on anaerobic fermentation, which limit the utilization of metal-contaminated biowaste. In this study, the impacts of Cd and Zn addition on biogas properties, process stability, substrate biodegradation, enzyme activity, and microbial properties were studied. The results showed that the addition of Cd together with Zn (Cd+Zn) increased the maximum daily and cumulative biogas yields, and brought forward the gas production peak compared with the Cd-added group. Taking the whole fermentation process into account, the promotion effects of adding Zn into the Cd-containing fermentation system on biogas yields were mainly attributable to better process stability, higher average NH4+-N concentration in the later stage of fermentation, reduced COD (p < 0.05), and increased biodegradability of lignocelluloses (p < 0.01), especially cellulose (p < 0.05) and lignin (p < 0.01). Meanwhile, the addition of Zn promoted the coenzyme M activity (p < 0.05), and increased the absolute abundance of Methanothermobacter. The bacteria communities during the fermentation process were responsible for the degradation of lignocelluloses. The results demonstrated that the addition of appropriate Zn into the Cd-containing fermentation system enhanced the efficiency of anaerobic fermentation and utilization of biowaste.

Process Analysis of Anaerobic Fermentation Exposure to Metal Mixtures.

Anaerobic fermentation is a cost-effective biowaste disposal approach. During fermentation, microorganisms require a trace amount of metals for optimal growth and performance. This study investigated the effects of metal mixtures on biogas properties, process stability, substrate degradation, enzyme activity, and microbial communities during anaerobic fermentation. The addition of iron (Fe), nickel (Ni), and zinc (Zn) into a copper (Cu)-stressed fermentation system resulted in higher cumulative biogas yields, ammonia nitrogen (NH4+-N) concentrations and coenzyme F420 activities. Ni and Zn addition enhanced process stability and acetate utilization. The addition of these metals also improved and brought forward the peak daily biogas yields as well as increased CH4 content to 88.94 and 86.58%, respectively. Adding Zn into the Cu-stressed system improved the abundance of Defluviitoga, Fibrobacter and Methanothermobacter, the degradation of cellulose, and the transformation of CO2 to CH4. The bacterial and archaeal communities were responsible for the degradation of lignocelluloses and CH4 production during the fermentation process. This study supports the reutilization of heavy metal-contaminated biowaste and provides references for further research on heavy metals impacted anaerobic fermentation.

Process analysis of anaerobic fermentation of Phragmites australis straw and cow dung exposing to elevated chromium (VI) concentrations.

Anaerobic fermentation is considered as a cost-effective way of biomass waste disposal. Chromium (Cr) is one of the heavy metals that often been blamed for unsatisfactory operation or failure of anaerobic fermentation. The impact of Cr (added as K2Cr2O7) on mesophilic anaerobic fermentation of Phragmites australis straw and cow dung was demonstrated by investigating the biogas properties, process stability, substrate degradation and enzyme activities during the fermentation process. The results showed that 30, 100 and 500 mg/L Cr6+ addition increased the cumulative biogas yields by up to 19.00%, 14.85% and 7.68% respectively, and brought forward the daily biogas yield peak. Meanwhile, the methane (CH4) content in the 30 (52.47%) and 100 (40.57%) mg/L Cr6+-added groups were generally higher than the control group (37.70%). Higher pH values (close to pH 7) and lower oxidation-reduction potential (ORP) values in the Cr6+-added groups after the 15th day indicated the better process stability compared to the control group. Taking the whole fermentation process into account, the promoting effect of Cr6+ addition on biogas yields was mainly attributable to better process stability, the enhanced degradation of lignin and hemicellulose, the transformation of intermediates into VFA, the higher coenzyme F420 activities and the efficient generation of CH4. These results demonstrate that an appropriate addition of Cr6+ could enhance the anaerobic fermentation which support the regulations utilizing of the Cr6+ contaminated biowaste.

Effects of periodic photoinhibitory light exposure on physiology and productivity of Arabidopsis plants grown under low light.

This work examined the long-term effects of periodic high light stress on photosynthesis, morphology, and productivity of low-light-acclimated Arabidopsis plants. Significant photoinhibition of Arabidopsis seedlings grown under low light (100 µmol photons m-2 s-1) was observed at the beginning of the high light treatment (three times a day for 30 min at 1800 µmol photons m-2 s-1). However, after 2 weeks of treatment, similar photosynthesis yields (Fv/Fm) to those of control plants were attained. The daily levels of photochemical quenching measured in the dark (qPd) indicated that the plants recovered from photoinhibition within several hours once transferred back to low light conditions, with complete recovery being achieved overnight. Acclimation to high light stress resulted in the modification of the number, structure, and position of chloroplasts, and an increase in the average chlorophyll a/b ratio. During ontogenesis, high-light-exposed plants had lower total leaf areas but higher above-ground biomass. This was attributed to the consumption of starch for stem and seed production. Moreover, periodic high light exposure brought forward the reproductive phase and resulted in higher seed yields compared with control plants grown under low light. The responses to periodic high light exposure of mature Arabidopsis plants were similar to those of seedlings but had higher light tolerance.

Copper stressed anaerobic fermentation: biogas properties, process stability, biodegradation and enzyme responses.

The effect of copper (added as CuCl2) on the anaerobic co-digestion of Phragmites straw and cow dung was studied in pilot experiments by investigating the biogas properties, process stability, substrate degradation and enzyme activities at different stages of mesophilic fermentation. The results showed that 30 and 100 mg/L Cu2+ addition increased the cumulative biogas yields by up to 43.62 and 20.77% respectively, and brought forward the daily biogas yield peak, while 500 mg/L Cu2+ addition inhibited biogas production. Meanwhile, the CH4 content in the 30 and 100 mg/L Cu2+-added groups was higher than that in the control group. Higher pH values (close to pH 7) and lower oxidation-reduction potential (ORP) values in the Cu2+-added groups after the 8th day indicated better process stability compared to the control group. In the presence of Cu2+, the degradation of volatile fatty acids (VFAs) and other organic molecules (represented by chemical oxygen demand, COD) generated from hydrolysis was enhanced, and the ammonia nitrogen (NH4+-N) concentrations were more stable than in the control group. The contents of lignin and hemicellulose in the substrate declined in the Cu2+-added groups while the cellulose contents did not. Neither the cellulase nor the coenzyme F420 activities could determine the biogas producing efficiency. Taking the whole fermentation process into account, the promoting effect of Cu2+ addition on biogas yields was mainly attributable to better process stability, the enhanced degradation of lignin and hemicellulose, the transformation of intermediates into VFA, and the generation of CH4 from VFA.

Direct impact of the sustained decline in the photosystem II efficiency upon plant productivity at different developmental stages.

The impact of chronic photoinhibition of photosystem II (PSII) on the productivity of plants remains unknown. The present study investigated the influences of persistent decline in the PSII yield on morphology and productivity of Arabidopsis plants that were exposed to lincomycin at two different developmental stages (seedling and rosette stage). The results indicated that, although retarded, the lincomycin treated plants were able to accomplish the entire growth period with only 50% of the maximum quantum yield of primary photochemistry (Fv/Fm) of the control plants. The decline in quantum yield limited the electron transport rate (ETR). The impact of lincomycin on NPQ was not significant in seedlings, but was pronounced in mature plants. The treated plants produced an above ground biomass of 50% compared to control plants. Moreover, a linear relationship was found between the above ground biomass and total rosette leaf area, and the slope was decreased due to photoinhibition. The starch accumulation was highly inhibited by lincomycin treatment. Lincomycin induced a significant decrease in seed yield with plants treated from the rosette state showing higher yield than those treated from the seedling stage. Our data suggest that the sustained decline of PSII efficiency decreases plant productivity by constraining the ETR, leaf development and starch production.

Biogas properties and enzymatic analysis during anaerobic fermentation of Phragmites australis straw and cow dung: influence of nickel chloride supplement.

The importance of nickel (added as NiCl2) on mesophilic anaerobic fermentation of Phragmites australis straw and cow dung was demonstrated by investigating the biogas properties, pH values, organic matter degradation [chemical oxygen demand (COD)] and enzyme activities (cellulase, protease and dehydrogenase) during the fermentation process. The results showed that Ni2+ addition increased the cumulative biogas yields by >18 % by improving the efficiency of first peak stage and bringing forward the second peak stage. The pH values were not significantly influenced by Ni2+ addition (p > 0.05). Biogas yields were associated with variations in COD concentrations rather than momentary concentrations. At the start-up stage of fermentation (4th day), the biogas yields increased gradually together with the increase of dehydrogenase activities at elevated Ni2+ concentrations when cellulase and protease activities were similar in all test groups. It is suggested that Ni2+ addition was mainly dependent on the methanogenic stage. After the start-up stage, the impact of Ni2+ addition on biogas production was mainly dependent on its effect on cellulase activities, rather than protease or dehydrogenase activities.

Effect of ferrous chloride on biogas production and enzymatic activities during anaerobic fermentation of cow dung and Phragmites straw.

The effect of ferrous (added as FeCl2) on the anaerobic co-digestion of Phragmites straw and cow dung was studied by investigating the biogas properties, pH values, organic matter degradation (COD) and enzyme activities (cellulase, protease and dehydrogenase) at different stages of mesophilic fermentation. The results showed that Fe(2+) addition increased the cumulative biogas yields by 18.1 % by extending the peak period with high daily biogas yields. Meanwhile, the methane (CH4) contents in the Fe(2+) added groups were generally higher than the control group before the 15th day. The pH values were not significantly impacted by Fe(2+) concentrations during the fermentation process. The COD concentrations, cellulase, protease and dehydrogenase activities varied with the added Fe(2+) concentrations and the stages of the fermentation process. At the beginning stage of fermentation (4th day), Fe(2+) addition increased the biogas production by improving the cellulase and dehydrogenase activities which caused a decline in COD. At the peak stage of fermentation (8th day), Fe(2+) addition enhanced the cellulase and protease activities, and resulted in lower COD contents than the control group. When the biogas yields decreased again (13th day), the COD contents varied similar with the protease and dehydrogenase activities, whilst cellulase activities were not sensitive to Fe(2+) concentrations. At the end of fermentation (26th day), Fe(2+) addition decreased the cellulase activities, led to lower COD contents and finally resulted the lower biogas yields than the control group. Taking the whole fermentation process into account, the promoting effect of Fe(2+) addition on biogas yields was mainly attributed to the extension of the gas production peak stage and the improvement of cellulase activities.

Ecophysiological characteristics and biogas production of cadmium-contaminated crops.

The present study proposes a novel strategy to get a rational production of biogas of the biomass residues from phytoremediation. This study investigates physiological responses, cadmium (Cd) accumulation and biogas production from canola, oat and wheat in pot and batch experiments. The results indicate that (1) aerial biomasses for canola, oat and wheat were enhanced by 5 mg Cd/kg soil by 19.41%, 8.78% and 3.38%, and the upper limit of Cd concentration that canola, oat and wheat can tolerate for aerial biomass production were 50, 10 and 10 mg Cd/kg soil; (2) canola accumulates more Cd than oat and wheat in its aerial parts; (3) cumulative biogas yields were 159.37%, 179.23% and 111.34% of the control when Cd in the shoot were 2.00±0.44, 39.80±1.25 and 6.37±0.15 mg Cd/kg biomass for canola, oat and wheat. Phytoremediation in cooperation with bioenergy production provide new insights for both soil remediation and energy research.