Sporosarcina pasteurii use in extreme alkaline conditions for recycling solid industrial wastes.

The ureolytic bacteria are one of the most efficient organisms able to produce high amounts of carbonate that easily react with the free calcium ions from the environment. Sporosarcina pasteurii, a robust microbe in alkaline environments, was tested in this work for its potential use in an eco-cementation process that involves the biomediated calcite precipitation (BCP). Bacterial behavior in extreme alkaline environment (pH values of 9-13) was tested in controlled laboratory conditions and in the presence of solid industry wastes, such as Cement Kiln Dust (CKD) and Lime Kiln Dust (LKD), by evaluating the enzymatic activity and the calcite precipitation capacity. Grain consolidation potential of S. pasteurii was tested for one type of CKD mixed with ground granulated blast-furnace slag (GGBS), with possible bioclogging and biocementation applications. The results revealed the formation of stable biocalcite in the presence of CKD, with a performance depending on the pH-value and free calcium ion content. The BCP induced by S. pasteurii and the recycling of solid wastes, such as CKD with high lime content, is a promising way for different bioclogging and biocementation applications, with benefits in construction costs and reduction of environmental pollution.

Alternative nutrient sources for biotechnological use of Sporosarcina pasteurii.

The potential use of Sporosarcina pasteurii in possible biotechnological applications on a large scale (ground improvement, consolidation of building structures and ornamental stone, or in developing bio-materials for the building industry), is based on its ability to produce high amounts of carbonate in a short period of time via urea hydrolysis. Industrial biomass production would have a low environmental impact and would be most economical if the standard growth media could be replaced with alternative nutrient sources, such as byproducts or wastes from other industries, or other low cost ingredients. The use of cost effective ingredients must guarantee ureolytic activities and growth conditions that are comparable to those resulting from the standard nutrient medium. In this work, three types of alternative media were tested for growing the ureolytic active bacteria S. pasteurii: (1) alternative nutrient sources such as industrial wastes resulting from the dairy and brewery industries, (2) fertilizer urea as an alternative urea substitute, and (3) different types of poultry manure based fertilizers as nutrient and urea substitutes. The comparison between the standard media, the nutrient alternatives and urea substitutes was possible by taking the protein concentration and nitrogen content into account. Bacterial activity was evaluated in terms of biomass changes over time (CFU, optical density, ATP measurements) and indirect estimation of the enzyme production (Nessler assay, conductivity measurement). The results revealed that some of the dairy wastes tested, such as whey and buttermilk, are potential alternative nutrients for bacterial development, while the urea fertilizer is perfectly suitable as an economical substitute for pure laboratory grade urea.

Deterioration of an Etruscan tomb by bacteria from the order Rhizobiales.

The Etruscan civilisation originated in the Villanovan Iron Age in the ninth century BC and was absorbed by Rome in the first century BC. Etruscan tombs, many of which are subterranean, are one of the best representations of this culture. The principal importance of these tombs, however, lies in the wall paintings and in the tradition of rich burial, which was unique in the Mediterranean Basin, with the exception of Egypt. Relatively little information is available concerning the biodeterioration of Etruscan tombs, which is caused by a colonisation that covers the paintings with white, circular to irregular aggregates of bacteria or biofilms that tend to connect each other. Thus, these colonisations sometimes cover extensive surfaces. Here we show that the colonisation of paintings in Tomba del Colle is primarily due to bacteria of the order Rhizobiales (Alphaproteobacteria), which were likely influenced by the neighbouring rhizosphere community and the availability of nutrients from root exudates.

The actinobacterial colonization of Etruscan paintings.

The paintings from Tomba della Scimmia, in Tuscany, are representative of the heavy bacterial colonization experienced in most Etruscan necropolises. The tomb remained open until the late 70's when it was closed because of severe deterioration of the walls, ceiling and paintings after decades of visits. The deterioration is the result of environmental changes and impacts suffered since its discovery in 1846. We show scanning electron microscopy and molecular studies that reveal the extent and nature of the biodeterioration. Actinobacteria, mainly Nocardia and Pseudonocardia colonize and grow on the tomb walls and this process is linked to the availability of organic matter, phyllosilicates (e.g. clay minerals) and iron oxides. Nocardia is found metabolically active in the paintings. The data confirm the specialization of the genera Nocardia and Pseudonocardia in the colonization of subterranean niches.

Standardization of peeling tests for assessing the cohesion and consolidation characteristics of historic stone surfaces.

A peeling test known as the "Scotch Tape test" has been used for more than 40 years in conservation practice for assessing the consolidation efficiency of degraded stone. However, the method has not been supported by any standard or reliably verified recommendations for its application. Its applicability is overestimated, and its unrestricted use without adequate knowledge and sufficient understanding can lead to non-comparable, non-reproducible and, in many cases, incorrect and severely biased results and assessments. This paper presents the results of a recent study focused on establishing limits for application, reliable procedures and a "standard" protocol for testing the cohesion characteristics of brittle and quasi-brittle materials, mainly mortars and stones. The main application strategy exploits repeated peeling in the same place on a surface in order to eliminate the effect of the natural decrease in the detached material from the subsurface layers, which might be incorrectly interpreted as a consolidation effect. There is a discussion of factors influencing the performance of the peeling test method, and examples of peeling measurements on various natural and artificial stones are presented.

Biodiversity of phototrophic biofilms dwelling on monumental fountains.

Among the stone monumental assets, artistic fountains are particularly affected by microbial colonization due to constant contact with water, giving rise to biodegradation processes related with physical-chemical and aesthetical alterations. In this paper, we make an overview of reported biodiversity of the phototrophic patina developed in various fountains of Italy and Spain. The microbial composition of four fountains (two from Florence, Italy and two from Granada, Spain) was investigated using traditional and/or molecular techniques. The results indicated many common similarities with regard the phototrophic biodiversity for all the investigated fountains. Automated ribosomal RNA intergenic spacer analysis (ARISA), a molecular fingerprint tool, was used to examine the eubacterial and cyanobacterial community for two of the investigated fountains. The principal component analysis of ARISA profiles strengthens the results obtained by traditional methods and revealed separate clusters, as a consequence of the differences of micro-environmental conditions for each fountain.

Detection and characterization of biodeteriogens on stone cultural heritage by fluorescence lidar.

Biodeteriogens are an important cause of the weathering of a monument, particularly those made of stone, and their detection at an early stage of development helps to protect the monument from deterioration. Frequent mapping of biodeteriogen accumulation is therefore highly necessary. The use of fluorescence lidar for this purpose was introduced in 1995 and has been developed in subsequent years. Three main aspects emerged during this research: the possibility of discriminating between different biodeteriogen strains, the minimum detectable quantity of biodeteriogens, and the control of the efficiency of biocide treatments. We describe the results of a laboratory experiment devoted to clarifying these three aspects of biodeteriogen monitoring by means of fluorescence lidar.