Migration of BHT and Irganox 1010 from low-density polyethylene (LDPE) to foods and food-simulating liquids.

The most widely used food-wrapping material is low-density polyethylene (LDPE). Food-wrap grades contain antioxidants to minimize degradation during processing and, in the final films, such additives are normally present at levels of several hundred ppm. During use, the antioxidants may migrate into food stored in LDPE wraps. Two typical antioxidants, BHT and Irganox 1010, were radiolabelled to allow accurate analytical measurement of the extent of their migration into foods and food-simulating liquids (FSL). The results show that BHT, a much smaller and more volatile molecule than Irganox 1010, migrates more rapidly into foods, but the differences are less for FSL. In most instances, migration appears to be controlled by diffusion of the antioxidant in the polymer, and the quantity lost can be correlated in a linear fashion with the square root of time. With aqueous FSL, and, presumably aqueous-type foods, however, anomalies result; the migration is often erratic, but is more closely related to time than to the square root of time. A tentative model developed to explain these facts assumes that the antioxidants decompose in aqueous media and the net migration rate is controlled largely by the rate of chemical decomposition. It is also shown that dry foods can be surprisingly effective sinks for antioxidants under typical storage conditions.

Migration of Irganox 1010 from ethylene-vinyl acetate films to foods and food-simulating liquids.

In a series of experiments on the migration of the antioxidant Irganox 1010 from ethylene-vinyl acetate (EVA) films into food-simulating liquids and foods, the antioxidant was found to migrate rapidly from EVA film into n-heptane, 100% ethanol and corn oil. The rate of migration into these media was greater from EVA than from low-density polyethylene (LDPE) under comparable conditions. In contrast, little migration of Irganox 1010 was recorded on exposure of the EVA film to aqueous media, whereas migration from LDPE into such media was relatively high.

Plasticizer migration from polyvinyl chloride film to solvents and foods.

Polyvinyl chloride (PVC) films used for food wraps contain significant concentrations of plasticizers, along with other additives. The rate of migration of these plasticizers to foods and food-simulating solvents is the principal concern of this paper, which reviews prior experimental studies and presents new data for radiolabelled dioctyl adipate. Analytical models are described to correlate many of the data, criteria are presented for identifying the controlling step in the mechanism of transfer of plasticizer from PVC films into foods and food-simulating solvents, and tentative recommendations are offered for the selection of food simulants and for the type of experiment necessary to allow an unambiguous interpretation of the data.