Two- and Three-Spin Hybrid Inorganic-Organic [2]Rotaxanes Containing Metallated Salen Groups.

Mono- and bis-salen functionalised [2]rotaxanes have been synthesised from the esterification of [2]rotaxanes containing phenol-terminated threads (salen = N,N'-bis(salicylidene)ethylenediamine). The [2]rotaxanes have general formula [RH][Cr7NiF8(O2CtBu)16], where [RH]+ is a thread with a central secondary ammonium site that templates a [Cr7NiF8(O2CtBu)16]- ring. The threads are terminated at one or both ends by carboxylic acid functionalised salen groups. The {M(salen)} groups can be free-base [M = (H+)2] or metallated [M = Cu2+, Ni2+, (VO)2+]. The [2]rotaxanes have been characterised by single crystal XRD and solid- and solution-state EPR spectroscopy. Where two paramagnetic M ions are involved [M = Cu2+ and/or (VO)2+] the [2]rotaxanes contain three electron spin S = ½ centres, since the {Cr7Ni} ring has an S = ½ ground state which is well isolated at low temperatures. These three-spin [2]rotaxanes have been characterised in solution by pulsed dipolar EPR spectroscopies (DEER, also known as PELDOR, and RIDME). The M···M and M···{Cr7Ni} interactions measured are consistent with dipolar interactions and also with the distances from single crystal XRD.

Weak Exchange Interactions in Multispin Systems: EPR Studies of Metalloporphyrins Decorated with {Cr7Ni} Rings.

Both metalloporphyrins and heterometallic {Cr7Ni} rings are of significant research interest due to their proposed roles in quantum information processing devices. In this study, we present a series of complexes in which [Cr7NiF3(Etglu)(O2CtBu)15] (N-EtgluH5 = N-ethyl-d-glucamine) heterometallic rings are coordinated to metalloporphyrin linkers: the symmetric [M(TPyP)] for M = Cu2+, VO2+, and H2TPyP = 5,10,15,20-tetra(4-pyridyl)porphyrin; and the asymmetric [{VO}(TrPPyP)] for H2(TrPPyP) = 5,10,15-(triphenyl)-20-(4-pyridyl)porphyrin. The magnetic interactions present in these complexes are unraveled using the continuous wave (CW) electron paramagnetic resonance (EPR) technique. The nature of the coupling between the {Cr7Ni} rings and the central metalloporphyrin is assessed by numerical simulations of CW EPR spectra and determined to be on the order of 0.01 cm-1, larger than the dipolar ones and suitable for individual spin addressability in multiqubit architectures.

Studying Cation Exchange in {Cr7Co} Pseudorotaxanes: Preparatory Studies for Making Hybrid Molecular Machines.

In the design of dynamic supramolecular systems used in molecular machines, it is important to understand the binding preferences between the macrocycle and stations along the thread. Here, we apply 1H NMR spectroscopy to investigate the relative stabilities of a series of linear alkylammonium templated pseudorotaxanes with the general formula [H2NRR'][Cr7CoF8(O2CCH2 tBu)16] by exchanging the cation in solution. Our results show that the pseudorotaxanes are able to exchange threads via a dissociative mechanism. The position of equilibrium is dependent upon the ammonium cation and solvent used. Short chain primary ammonium cations are shown to be far less favourable macrocycle stations than secondary ammonium cations. Collision-induced dissociation mass spectrometry (CID-MS) has been used to look at disassembly of the pseudorotaxanes in a solvent-free environment and stability trends compared to those in acetone-d6. The energy needed to induce 50 % of the precursor ion loss (E50) is used and shows a similar trend to the equilibria measured by NMR. The relative stabilities of these hybrid inorganic-organic pseudo-rotaxanes are different to those of host-guest compounds involving crown ethers and this may be valuable for the design of molecular machines.

A ring of rotaxanes: studies of a large paramagnetic assembly in solution.

Here we report the synthesis and structural characterization of four [7]rotaxanes formed by coordinating hybrid inorganic-organic [2]rotaxanes to a central {Ni12} core. X-ray single crystal diffraction demonstrate that [7]rotaxanes are formed, with a range of conformations in the crystal. Small angle X-ray scattering supported by molecular dynamic simulations demonstrates that the large molecules are stable in solution and also show that the conformers present in solution are not those found in the crystal. Pulsed EPR spectroscopy show that phase memory times for the {Cr7Ni} rings, which have been proposed as qubits, are reduced but not dramatically by the presence of the {Ni12} cage.

Correction: Synthesis and characterization of heterometallic rings templated through alkylammonium or imidazolium cations.

Correction for 'Synthesis and characterization of heterometallic rings templated through alkylammonium or imidazolium cations' by Rajeh Alotaibi et al., Dalton Trans., 2023, 52, 7473-7481, https://doi.org/10.1039/D3DT00982C.

Control and Transferability of Magnetic Interactions in Supramolecular Structures: Trimers of {Cr7 Ni} Antiferromagnetic Rings.

A synthetic strategy is demonstrated to prepare two distinct trimers of antiferromagnetically coupled {Cr7 Ni} rings, substantially varying the magnetic interactions between the spin centres. The interactions were studied using multi-frequency cw EPR: in a trimer linked via non-covalent H-bonding interactions no measurable interaction between rings was seen, while in a trimer linked via iso-nicotinate groups isotropic and anisotropic exchange interactions of +0.42 and -0.8 GHz, respectively, were observed. The latter are the same as those for a simpler hetero-dimer system, showing how the spin-spin interactions can be built in a predictable and modular manner in these systems.

Synthesis and characterization of heterometallic rings templated through alkylammonium or imidazolium cations.

We report the synthesis and structural characterization of a series of heterometallic rings templated via alkylammonium or imidazolium cations. The template and preference of each metal's coordination geometry can control the structure of heterometallic compounds, leading to octa-, nona-, deca-, dodeca-, and tetradeca-metallic rings. The compounds were characterized by single-crystal X-ray diffraction, elemental analysis, magnetometry, and EPR measurements. Magnetic measurements show that the exchange coupling between metal centres is antiferromagnetic. EPR spectroscopy shows that the spectra of {Cr7Zn} and {Cr9Zn} have S = 3/2 ground states, while the spectra of {Cr12Zn2} and {Cr8Zn} are consistent with S = 1 and 2 excited states. The EPR spectra of {(ImidH)-Cr6Zn2}, {(1-MeImH)-Cr8Zn2}, and {(1,2-diMeImH)-Cr8Zn2} include a combination of linkage isomers. The results on these related compounds allow us to examine the transferability of magnetic parameters between compounds.

Adduct Ions as Diagnostic Probes of Metallosupramolecular Complexes Using Ion Mobility Mass Spectrometry.

Following electrospray ionization, it is common for analytes to enter the gas phase accompanied by a charge-carrying ion, and in most cases, this addition is required to enable detection in the mass spectrometer. These small charge carriers may not be influential in solution but can markedly tune the analyte properties in the gas phase. Therefore, measuring their relative influence on the target molecule can assist our understanding of the structure and stability of the analyte. As the formed adducts are usually distinguishable by their mass, differences in the behavior of the analyte resulting from these added species (e.g., structure, stability, and conformational dynamics) can be easily extracted. Here, we use ion mobility mass spectrometry, supported by density functional theory, to investigate how charge carriers (H+, Na+, K+, and Cs+) as well as water influence the disassembly, stability, and conformational landscape of the homometallic ring [Cr8F8(O2CtBu)16] and the heterometallic rotaxanes [NH2RR'][Cr7MF8(O2CtBu)16], where M = MnII, FeII, CoII, NiII, CuII, ZnII, and CdII. The results yield new insights on their disassembly mechanisms and support previously reported trends in cavity size and transition metal properties, demonstrating the potential of adduct ion studies for characterizing metallosupramolecular complexes in general.

Templating metallocycles with a macrocycle: synthesis, structures and magnetic studies of {Cr11M2} complexes.

Addition of 1,4,8,11-tetrazacyclotetradecane (cyclam) to a reaction that produces octametallic rings when simpler amines are used, produces {Cr11M2} "pretzels" (M = ZnII or CuII) where the cyclam coordinates to the MII ion which then sits at the centre of a twelve-metal macrocycle. Magnetic studies were fitted using the finite-temperature Lanczos method (FTLM), and the results demonstrate that exchange interactions are transferable from previous exchange-coupled CrIII rings.

Disassembly Mechanisms and Energetics of Polymetallic Rings and Rotaxanes.

Understanding the fundamental reactivity of polymetallic complexes is challenging due to the complexity of their structures with many possible bond breaking and forming processes. Here, we apply ion mobility mass spectrometry coupled with density functional theory to investigate the disassembly mechanisms and energetics of a family of heterometallic rings and rotaxanes with the general formula [NH2RR'][Cr7MF8(O2CtBu)16] with M = MnII, FeII, CoII, NiII, CuII, ZnII, CdII. Our results show that their stability can be tuned both by altering the d-metal composition in the macrocycle and by the end groups of the secondary ammonium cation [NH2RR']+. Ion mobility probes the conformational landscape of the disassembly process from intact complex to structurally distinct isobaric fragments, providing unique insights to how a given divalent metal tunes the structural dynamics.

Negative Tone Metallic Organic Resists with Improved Sensitivity for Plasma Etching: Implications for Silicon Nanostructure Fabrication and Photomask Production.

Metal-organic materials such as [NH2(CH2-CH=CH2)2][Cr7NiF8(Pivalate)16] can act as negative tone resists for electron beam lithography (EBL) with high-resolution patterning of sub-40 nanometer pitch while exhibiting ultrahigh dry etch selectivities >100:1 and giving line dose exposures >11,000 pC/cm. It is clear that the resist sensitivity is too low to be used to manufacture the latest nanoscale photomasks that are suitable for extreme ultraviolet lithography. Therefore, the focus of this work here is to improve the sensitivity of this resist while maintaining its resolution and dry etch selectivity. Using our latest Monte Carlo simulation called Excalibur, we predict that the sensitivity would increase by a factor of 1.4 when the nickel atom is substituted by a cadmium atom. EBL studies showed an excellent agreement with the simulation, and plasma etching studies demonstrated that this did not affect the dry etch performance of the resist which remains very good with a selectively of ca. 99:1 for the etching of silicon at these resolutions with a low sensitivity of 7995 pC/cm.

Modelling Conformational Flexibility in a Spectrally Addressable Molecular Multi-Qubit Model System.

Dipolar coupled multi-spin systems have the potential to be used as molecular qubits. Herein we report the synthesis of a molecular multi-qubit model system with three individually addressable, weakly interacting, spin 1 / 2 ${{ 1/2 }}$ centres of differing g-values. We use pulsed Electron Paramagnetic Resonance (EPR) techniques to characterise and separately address the individual electron spin qubits; CuII , Cr7 Ni ring and a nitroxide, to determine the strength of the inter-qubit dipolar interaction. Orientation selective Relaxation-Induced Dipolar Modulation Enhancement (os-RIDME) detecting across the CuII spectrum revealed a strongly correlated CuII -Cr7 Ni ring relationship; detecting on the nitroxide resonance measured both the nitroxide and CuII or nitroxide and Cr7 Ni ring correlations, with switchability of the interaction based on differing relaxation dynamics, indicating a handle for implementing EPR-based quantum information processing (QIP) algorithms.

Five-Spin Supramolecule for Simulating Quantum Decoherence of Bell States.

We report a supramolecule that contains five spins of two different types and with, crucially, two different and predictable interaction energies between the spins. The supramolecule is characterized, and the interaction energies are demonstrated by electron paramagnetic resonance (EPR) spectroscopy. Based on the measured parameters, we propose experiments that would allow this designed supramolecule to be used to simulate quantum decoherence in maximally entangled Bell states that could be used in quantum teleportation.

Decorating polymer beads with 1014 inorganic-organic [2]rotaxanes as shown by spin counting.

Polymer beads have been used as the core of magnetic particles for around twenty years. Here we report studies to attach polymetallic complexes to polymer beads for the first time, producing beads of around 115 microns diameter that are attached to 1014 hybrid inorganic-organic [2]rotaxanes. The bead is then formally a [1014] rotaxane. The number of complexes attached is counted by EPR spectroscopy after including TEMPO radicals within the thread of the hybrid [2]rotaxanes.

Single Isomer Heterometallic {CrIII6MII2} Rings Templated by Tetramethylammonium.

A family of heterometallic rings [Me4N]2[CrIII6MII2F8(O2CtBu)16] is reported using tetramethylammonium hydroxide pentahydrate as the source of a template, where M = Zn, Mn, Ni, and Co. The metal cores are octagons with metal-metal edges bridged by one fluoride and two carboxylate ligands. The divalent metal ions are found ordered at positions 1 and 5 in the octagon. The tetramethylammonium cations are above and below the metal plane of the ring in the crystal structure. Magnetic studies show antiferromagnetic coupling between the paramagnetic metal ions present, leading to paramagnetic ground states in each case. 1H NMR spectroscopy confirms that the structure of the {CrIII6CoII2} ring exists in solution, and electron paramagnetic resonance spectroscopy confirms the magnetic structure of the other three rings.

Targeting molecular quantum memory with embedded error correction.

The implementation of a quantum computer requires both to protect information from environmental noise and to implement quantum operations efficiently. Achieving this by a fully fault-tolerant platform, in which quantum gates are implemented within quantum-error corrected units, poses stringent requirements on the coherence and control of such hardware. A more feasible architecture could consist of connected memories, that support error-correction by enhancing coherence, and processing units, that ensure fast manipulations. We present here a supramolecular {Cr7Ni}-Cu system which could form the elementary unit of this platform, where the electronic spin 1/2 of {Cr7Ni} provides the processor and the naturally isolated nuclear spin 3/2 of the Cu ion is used to encode a logical unit with embedded quantum error-correction. We demonstrate by realistic simulations that microwave pulses allow us to rapidly implement gates on the processor and to swap information between the processor and the quantum memory. By combining the storage into the Cu nuclear spin with quantum error correction, information can be protected for times much longer than the processor coherence.

Gold(i) bridged dimeric and trimeric heterometallic {Cr7Ni}-based qubit systems and their characterization.

Gold(i) bridged dimeric and trimeric structures of a ground state spin S = 1/2 heterometallic {Cr7Ni} wheel have been prepared and studied by continuous wave (CW) and pulsed wave EPR spectrometry. The {Cr7Ni} relaxation time constants (T1 and Tm) show rates matching well with previous observations. Four pulse Double Electron Resonance (DEER) studies suggest presence of more than one conformations. Small Angle X-ray Scattering (SAXS) in conjunction with Molecular Dynamic (MD) Simulations were performed to look at the possible conformations in solution. In line with DEER results, simulation data further indicated more flexible molecular geometry in solution than the one in solid state.

The Synthesis and Characterisation of a Molecular Sea-Serpent: Studies of a {Cr24 Cu7 } Chain.

A finite chain of thirty-one paramagnetic centers is reported, synthesized by reaction of hydrated chromium fluoride, copper carbonate and pivalic acid in the presence of 1,4,7,10-tetrazacyclododecane (cyclen). Magnetic studies show predominantly anti-ferromagnetic exchange leading to a high density of low-lying spin states and large saturation field.

Heterometallic 3d-4f Complexes as Air-Stable Molecular Precursors in Low Temperature Syntheses of Stoichiometric Rare-Earth Orthoferrite Powders.

Four 3d-4f hetero-polymetallic complexes [Fe2Ln2((OCH2)3CR)2(O2CtBu)6(H2O)4] (where Ln = La (1 and 2) and Gd (3 and 4); and R = Me (1 and 3) and Et (2 and 4)) are synthesized and analyzed using elemental analysis, Fourier transform infrared spectroscopy, thermogravimetric analysis, and SQUID magnetometry. Crystal structures are obtained for both methyl derivatives and show that the complexes are isostructural and adopt a defective dicubane topology. The four heavy metals are connected with two alkoxide bridges. These four precursors are used as single-source precursors to prepare rare-earth orthoferrite pervoskites of the form LnFeO3. Thermal decomposition in a ceramic boat in a tube furnace gives orthorhombic LnFeO3 powders using optimized temperatures and decomposition times: LaFeO3 formed at 650 °C over 30 min, whereas GdFeO3 formed at 750 °C over 18 h. These materials are structurally characterized using powder X-ray diffraction, Raman spectroscopy, scanning electron microscopy, energy-dispersive X-ray map spectroscopy, and SQUID magnetometry. EDX spectroscopy mapping reveals a homogeneous spatial distribution of elements for all four materials consistent with LnFeO3. Magnetic measurements on complexes 1-4 confirm the presence of weak antiferromagnetic coupling between the central Fe(III) ions of the clusters and negligible ferromagnetic interaction with peripheral Gd(III) ions in 3 and 4. Zero-field-cooled and field-cooled measurements of magnetization of LaFeO3 and GdFeO3 in the solid-state suggest that both materials are ferromagnetic, and both materials show open magnetic hysteresis loops at 5 and 300 K, with Msat higher than previously reported for these nanomaterials. We conclude that this is a new and facile low temperature route to these important magnetic materials that is potentially universal, limited only by what metals can be programmed into the precursor complexes.

Conformational Flexibility of Hybrid [3]- and [4]-Rotaxanes.

The synthesis, structures, and properties of [4]- and [3]-rotaxane complexes are reported where [2]-rotaxanes, formed from heterometallic {Cr7Ni} rings, are bound to a fluoride-centered {CrNi2} triangle. The compounds have been characterized by single-crystal X-ray diffraction and have the formulas [CrNi2(F)(O2CtBu)6]{(BH)[Cr7NiF8(O2CtBu)16]}3 (3) and [CrNi2(F)(O2CtBu)6(THF)]{(BH)[Cr7NiF8(O2CtBu)16]}2 (4), where B = py-CH2CH2NHCH2C6H4SCH3. The [4]-rotaxane 3 is an isosceles triangle of three [2]-rotaxanes bound to the central triangle while the [3]-rotaxane 4 contains only two [2]-rotaxanes bound to the central triangle. Studies of the behavior of 3 and 4 in solution by small-angle X-ray scattering and atomistic molecular dynamic simulations show that the structure of 3 is similar to that found in the crystal but that 4 has a different conformation to the crystal. Continuous wave and pulsed electron paramagnetic resonance spectroscopy was used to study the structures present and demonstrate that in frozen solutions (at 5 K) 4 forms more extended molecules than 3 and with a wider range of conformations.