Molecular Detection of Venous Thrombosis in Mouse Models Using SPECT/CT.

The efficacy of thrombolysis is inversely correlated with thrombus age. During early thrombogenesis, activated factor XIII (FXIIIa) cross-links α2-AP to fibrin to protect it from early lysis. This was exploited to develop an α2-AP-based imaging agent to detect early clot formation likely susceptible to thrombolysis treatment. In this study, this imaging probe was improved and validated using 111In SPECT/CT in a mouse thrombosis model. In vitro fluorescent- and 111In-labelled imaging probe-to-fibrin cross-linking assays were performed. Thrombus formation was induced in C57Bl/6 mice by endothelial damage (FeCl3) or by ligation (stenosis) of the infrarenal vena cava (IVC). Two or six hours post-surgery, mice were injected with 111In-DTPA-A16 and ExiTron Nano 12000, and binding of the imaging tracer to thrombi was assessed by SPECT/CT. Subsequently, ex vivo IVCs were subjected to autoradiography and histochemical analysis for platelets and fibrin. Efficient in vitro cross-linking of A16 imaging probe to fibrin was obtained. In vivo IVC thrombosis models yielded stable platelet-rich thrombi with FeCl3 and fibrin and red cell-rich thrombi with stenosis. In the stenosis model, clot formation in the vena cava corresponded with a SPECT hotspot using an A16 imaging probe as a molecular tracer. The fibrin-targeting A16 probe showed specific binding to mouse thrombi in in vitro assays and the in vivo DVT model. The use of specific and covalent fibrin-binding probes might enable the clinical non-invasive imaging of early and active thrombosis.

Bicyclic RGD peptides enhance nerve growth in synthetic PEG-based Anisogels.

Nerve regeneration scaffolds often consist of soft hydrogels modified with extracellular matrix (ECM) proteins or fragments, as well as linear and cyclic peptides. One of the commonly used integrin-mediated cell adhesive peptide sequences is Arg-Gly-Asp (RGD). Despite its straightforward coupling mechanisms to artificial extracellular matrix (aECM) constructs, linear RGD peptides suffer from low stability towards degradation and lack integrin selectivity. Cyclization of RGD improves the affinity towards integrin subtypes but lacks selectivity. In this study, a new class of short bicyclic peptides with RGD in a cyclic loop and 'random screened' tri-amino acid peptide sequences in the second loop is investigated as a biochemical cue for cell growth inside three-dimensional (3D) synthetic poly(ethylene glycol) (PEG)-based Anisogels. These peptides impart high integrin affinity and selectivity towards either αvß3 or α5ß1 integrin subunits. Enzymatic conjugation of such bicyclic peptides to the PEG backbone enables the formulation of an aECM hydrogel that supports nerve growth. Furthermore, different proteolytic cleavable moieties are incorporated and compared to promote cell migration and proliferation, resulting in enhanced cell growth with different degradable peptide crosslinkers. Mouse fibroblasts and primary nerve cells from embryonic chick dorsal root ganglions (DRGs) show superior growth in bicyclic RGD peptide conjugated gels selective towards αvß3 or α5ß1, compared to monocyclic or linear RGD peptides, with a slight preference to αvß3 selective bicyclic peptides in the case of nerve growth. Synthetic Anisogels, modified with bicyclic RGD peptides and containing short aligned, magneto-responsive fibers, show oriented DRG outgrowth parallel to the fibers. This report shows the potential of PEG hydrogels coupled with bicyclic RGD peptides as an aECM model and paves the way for a new class of integrin selective biomolecules for cell growth and nerve regeneration.

A Phase I Open-Label Clinical Trial Evaluating the Therapeutic Vaccine hVEGF26-104/RFASE in Patients with Advanced Solid Malignancies.

LESSONS LEARNED: The novel therapeutic vaccine hVEGF26-104 /RFASE was found to be safe and well tolerated in patients with cancer. hVEGF26-104 /RFASE failed to induce seroconversion against native hVEGF165 and, accordingly, neither a decrease in circulating vascular endothelial growth factor (VEGF) levels nor clinical benefit was observed. Remarkably, hVEGF26-104 /RFASE induced VEGF165 -neutralizing antibodies in a nonhuman primate model. The absence of seroconversion in human calls for caution in the interpretation of efficacy of human vaccines in nonhuman primates. BACKGROUND: Targeting vascular endothelial growth factor-A (VEGF) is a well-established anticancer therapy. We designed a first-in-human clinical trial to investigate the safety and immunogenicity of the novel vaccine hVEGF26-104 /RFASE. METHODS: Patients with advanced solid malignancies with no standard treatment options available were eligible for this phase I study with a 3+3 dose-escalation design. On days 0, 14, and 28, patients received intramuscular hVEGF26-104 , a truncated synthetic three-dimensional (3D)-structured peptide mimic covering the amino acids 26-104 of the human VEGF165 isoform, emulsified in the novel adjuvant Raffinose Fatty Acid Sulphate Ester (RFASE), a sulpholipopolysaccharide. Objectives were to determine safety, induction of VEGF-neutralizing antibodies, and the maximum tolerated dose. Blood was sampled to measure VEGF levels and antibody titers. RESULTS: Eighteen of 27 enrolled patients received three immunizations in six different dose-levels up to 1,000 µg hVEGF26-104 and 40 mg RFASE. No dose-limiting toxicity was observed. Although in four patients an antibody titer against hVEGF26-104 was induced (highest titer: 2.77 10 log), neither a reduction in VEGF levels nor neutralizing antibodies against native VEGF165 were detected. CONCLUSION: Despite having an attractive safety profile, hVEGF26-104 /RFASE was not able to elicit seroconversions against native VEGF165 and, consequently, did not decrease circulating VEGF levels. Deficient RFASE adjuvant activity, as well as dominant immunoreactivity toward neoepitopes, may have impeded hVEGF26-104 /RFASE's efficacy in humans.

High-Affinity α5ß1-Integrin-Selective Bicyclic RGD Peptides Identified via Screening of Designed Random Libraries.

We report the identification of high-affinity and selectivity integrin α5ß1-binding bicyclic peptides via "designed random libraries", that is, the screening of libraries comprising the universal integrin-binding sequence Arg-Gly-Asp (RGD) in the first loop in combination with a randomized sequence (XXX) in the second loop. Screening of first-generation libraries for α5ß1-binding peptides yielded a triple-digit nanomolar bicyclic α5ß1-binder (CT3RGDcT3AYGCT3, IC50 = 406 nM). Next-generation libraries were designed by partially varying the structure of the strongest first-generation lead inhibitor and screened for improved affinities and selectivities for this receptor. In this way, we identified three high-affinity α5ß1-binders (CT3RGDcT3AYJCT3, J = d-Leu, IC50 = 90 nM; CT3RGDcT3AYaCT3, IC50 = 156 nM; CT3RGDcT3AWGCT3, IC50 = 173 nM), of which one even showed a higher α5ß1-affinity than the 32 amino acid benchmark peptide knottin-RGD (IC50 = 114 nM). Affinity for α5ß1-integrin was confirmed by SPFS analysis showing a Kd of 4.1 nM for Cy5-labeled RGD-bicycle CT3RGDcT3AYJCT3 (J = d-Leu) and a somewhat higher Kd (9.0 nM) for Cy5-labeled knottin-RGD. The α5ß1-bicycles, for example, CT3RGDcT3AYJCT3 (J = d-Leu), showed excellent selectivities over αvß5 (IC50 ratio α5ß1/αvß5 between <0.009 and 0.039) and acceptable selectivities over αvß3 (IC50 ratios α5ß1/αvß3 between 0.090 and 0.157). In vitro staining of adipose-derived stem cells with Cy5-labeled peptides using confocal microscopy revealed strong binding of the α5ß1-selective bicycle CT3RGDcT3AWGCT3 to integrins in their natural environment, illustrating the high potential of these RGD bicycles as markers for α5ß1-integrin expression.

Synthesis of Constrained Tetracyclic Peptides by Consecutive CEPS, CLIPS, and Oxime Ligation.

In Nature, multicyclic peptides constitute a versatile molecule class with various biological functions. For their pharmaceutical exploitation, chemical methodologies that enable selective consecutive macrocyclizations are required. We disclose a combination of enzymatic macrocyclization, CLIPS alkylation, and oxime ligation to prepare tetracyclic peptides. Five new small molecular scaffolds and differently sized model peptides featuring noncanonical amino acids were synthesized. Enzymatic macrocyclization, followed by one-pot scaffold-assisted cyclizations, yielded 21 tetracyclic peptides in a facile and robust manner.

Bicyclic RGD peptides with high integrin α v ß 3 and α 5 ß 1 affinity promote cell adhesion on elastin-like recombinamers.

Biomaterial design in tissue engineering aims to identify appropriate cellular microenvironments in which cells can grow and guide new tissue formation. Despite the large diversity of synthetic polymers available for regenerative medicine, most of them fail to fully match the functional properties of their native counterparts. In contrast, the few biological alternatives employed as biomaterials lack the versatility that chemical synthesis can offer. Herein, we studied the HUVEC adhesion and proliferation properties of elastin-like recombinamers (ELRs) that were covalently functionalized with each three high-affinity and selectivity α v ß 3- and α 5 ß 1-binding bicyclic RGD peptides. Next to the bicycles, ELRs were also functionalized with various integrin-binding benchmark peptides, i.e. knottin-RGD, cyclo-[KRGDf] and GRGDS, allowing for better classification of the obtained results. Covalent functionalization with the RGD peptides, as validated by MALDI-TOF analysis, guarantees flexibility and minimal steric hindrance for interactions with cellular integrins. In addition to the covalently modified RGD-ELRs, we also synthesized another benchmark ELR comprising RGD as part of the backbone. HUVEC adhesion and proliferation analysis using the PicoGreen® assay revealed a higher short-term adhesion and proliferative capacity of cells on ELR surfaces functionalized with high affinity, integrin-binding bicyclic RGD-peptides compared with the ELRs containing RGD in the backbone.

Bicyclic RGD Peptides with Exquisite Selectivity for the Integrin αvß3 Receptor Using a "Random Design" Approach.

We describe the identification of bicyclic RGD peptides with high affinity and selectivity for integrin αvß3 via high-throughput screening of partially randomized libraries. Peptide libraries (672 different compounds) comprising the universal integrin-binding sequence Arg-Gly-Asp (RGD) in the first loop and a randomized sequence XXX (X being one of 18 canonical l-amino acids) in the second loop, both enclosed by either an l- or d-Cys residue, were converted to bicyclic peptides via reaction with 1,3,5-tris(bromomethyl)benzene (T3). Screening of first-generation libraries yielded lead bicyclic inhibitors displaying submicromolar affinities for integrin αvß3 (e.g., CT3HEQcT3RGDcT3, IC50 = 195 nM). Next generation (second and third) libraries were obtained by partially varying the structure of the strongest lead inhibitors and screening for improved affinities and selectivities. In this way, we identified the highly selective bicyclic αvß3-binders CT3HPQcT3RGDcT3 (IC50 = 30 nM), CT3HPQCT3RGDcT3 (IC50 = 31 nM), and CT3HSQCT3RGDcT3 (IC50 = 42 nM) with affinities comparable to that of a knottin-RGD-type peptide (32 amino acids, IC50 = 38 nM) and outstanding selectivities over integrins αvß5 (IC50 > 10000 nM) and α5ß1 (IC50 > 10000 nM). Affinity measurements using surface plasmon-enhanced fluorescence spectroscopy (SPFS) yielded Kd values of 0.4 and 0.6 nM for the Cy5-labeled bicycle CT3HPQcT3RGDcT3 and RGD "knottin" peptide, respectively. In vitro staining of HT29 cells with Cy5-labeled bicycles using confocal microscopy revealed strong binding to integrins in their natural environment, which highlights the high potential of these peptides as markers of integrin expression.

A One-Pot "Triple-C" Multicyclization Methodology for the Synthesis of Highly Constrained Isomerically Pure Tetracyclic Peptides.

A broadly applicable one-pot methodology for the facile transformation of linear peptides into tetracyclic peptides through a chemoenzymatic peptide synthesis/chemical ligation of peptides onto scaffolds/copper(I)-catalyzed reaction (CEPS/CLIPS/CuAAC; "triple-C") locking methodology is reported. Linear peptides with varying lengths (≥14 amino acids), comprising two cysteines and two azidohomoalanines (Aha), were efficiently cyclized head-to-tail by using the peptiligase variant omniligase-1 (CEPS). Subsequent ligation-cyclization with tetravalent (T41/2 ) scaffolds containing two bromomethyl groups (CLIPS) and two alkyne functionalities (CuAAC) yielded isomerically pure tetracyclic peptides. Sixteen different functional tetracycles, derived from bicyclic inhibitors against urokinase plasminogen activator (uPA) and coagulation factor XIIa (FXIIa), were successfully synthesized and their bioactivities evaluated. Two of these (FF-T41/2 ) exhibited increased inhibitory activity against FXIIa, compared with a bicyclic control peptide. The corresponding hetero-bifunctional variants (UF/FU-T41/2 ), with a single copy of each inhibitory sequence, exhibited micromolar activities against both uPA and FXIIa; thus illustrating the potential of the "bifunctional tetracyclic peptide" inhibitor concept.

General and Facile Route to Isomerically Pure Tricyclic Peptides Based on Templated Tandem CLIPS/CuAAC Cyclizations.

We report a one-pot ligation/cyclization technology for the rapid and clean conversion of linear peptides into tricyclic peptides that is based on using tetravalent scaffolds containing two benzyl bromide and two alkyne moieties. These react via CLIPS/CuAAC reactions with cysteines and azides in the peptide. Flexibility in the scaffolds is key to the formation of isomerically pure products as the flexible scaffolds T41 and T42 mostly promote the formation of single isomeric tricycles while the rigid scaffolds T43 and T44 do not yield clean products. There seems to be no limitation to the number and types of amino acids present as 18 canonical amino acids were successfully implemented. We also observed that azides at the peptide termini and cysteine residues in the center gave better results than compounds with the functional groups placed the other way round.

High-Affinity RGD-Knottin Peptide as a New Tool for Rapid Evaluation of the Binding Strength of Unlabeled RGD-Peptides to αvß3, αvß5, and α5ß1 Integrin Receptors.

We describe a highly sensitive competition ELISA to measure integrin-binding of RGD-peptides in high-throughput without using cells, ECM-proteins, or antibodies. The assay measures (nonlabeled) RGD-peptides' ability to inhibit binding of a biotinylated "knottin"-RGD peptide to surface-immobilized integrins and, thus, enables quantification of the binding strength of high-, medium-, and low-affinity RGD-binders. We introduced the biotinylated knottin-RGD peptide instead of biotinylated cyclo[RGDfK] (as reported by Piras et al.), as integrin-binding was much stronger and clearly detectable for all three integrins. In order to maximize sensitivity and cost-efficiency, we first optimized several parameters, such as integrin-immobilization levels, knottin-RGD concentration, buffer compositions, type of detection tag (biotin, His- or cMyc-tag), and spacer length. We thereby identified two key factors, that is, (i) the critical spacer length (longer than Gly) and (ii) the presence of Ca2+ and Mg2+ in all incubation and washing buffers. Binding of knottin-RGD peptide was strongest for αvß3 but also detectable for both αvß5 and α5ß1, while binding of biotinylated cyclo[RGDfK] was very weak and only detectable for αvß3. For assay validation, we finally determined IC50 values for three unlabeled peptides, that is: (i) linear GRGDS, (ii) cyclo[RGDfK], and (iii) the knottin-RGD itself for binding to three different integrin receptors (αvß3, αvß5, α5ß1). Major benefits of the novel assay are (i) the extremely low consumption of integrin (50 ng/peptide), (ii) the fact that neither antibodies/ECM-proteins nor integrin-expressing cells are required for detection, and (iii) its suitability for high-throughput screening of (RGD-)peptide libraries.

Targeted vaccination against the bevacizumab binding site on VEGF using 3D-structured peptides elicits efficient antitumor activity.

Therapeutic targeting of the VEGF signaling axis by the VEGF-neutralizing monoclonal antibody bevacizumab has clearly demonstrated clinical benefit in cancer patients. To improve this strategy using a polyclonal approach, we developed a vaccine targeting VEGF using 3D-structured peptides that mimic the bevacizumab binding site. An in-depth study on peptide optimization showed that the antigen's 3D structure is essential to achieve neutralizing antibody responses. Peptide 1 adopts a clear secondary, native-like structure, including the typical cysteine-knot fold, as evidenced by CD spectroscopy. Binding and competition studies with bevacizumab in ELISA and surface plasmon resonance analysis revealed that peptide 1 represents the complete bevacizumab binding site, including the hairpin loop (ß5-turn-ß6) and the structure-supporting ß2-α2-ß3 loop. Vaccination with peptide 1 elicited high titers of cross-reactive antibodies to VEGF, with potent neutralizing activity. Moreover, vaccination-induced antisera displayed strong angiostatic and tumor-growth-inhibiting properties in a preclinical mouse model for colorectal carcinoma, whereas antibodies raised with peptides exclusively encompassing the ß5-turn-ß6 loop (peptides 15 and 20) did not. Immunization with peptide 1 or 7 (murine analog of 1) in combination with the potent adjuvant raffinose fatty acid sulfate ester (RFASE) showed significant inhibition of tumor growth in the B16F10 murine melanoma model. Based on these data, we conclude that this vaccination technology, which is currently being investigated in a phase I clinical trial (NCT02237638), can potentially outperform currently applied anti-VEGF therapeutics.

Reconstructing the discontinuous and conformational ß1/ß3-loop binding site on hFSH/hCG by using highly constrained multicyclic peptides.

Making peptide-based molecules that mimic functional interaction sites on proteins remains a challenge in biomedical sciences. Here, we present a robust technology for the covalent assembly of highly constrained and discontinuous binding site mimics, the potential of which is exemplified for structurally complex binding sites on the "Cys-knot" proteins hFSH and hCG. Peptidic structures were assembled by Ar(CH2 Br)2-promoted peptide cyclizations, combined with oxime ligation and disulfide formation. The technology allows unprotected side chain groups and is applicable to peptides of different lengths and nature. A tetracyclic FSH mimic was constructed, showing >600-fold improved binding compared to linear or monocyclic controls. Binding of a tricyclic hCG mimic to anti-hCG mAb 8G5 was identical to hCG itself (IC50 =260 vs. 470 pM), whereas this mimic displayed an IC50 value of 149 nM for mAb 3468, an hCG-neutralizing antibody with undetectable binding to either linear or monocyclic controls.

Exploration of the design principles of a cell-penetrating bicylic peptide scaffold.

Cell-penetrating peptides (CPPs) possess the capacity to induce cell entry of themselves and attached molecular cargo, either by endocytosis or by direct translocation. Conformational constraints have been described as one means to increase the activity of CPPs, especially for direct crossing of the plasma membrane. Here, we explored the structure-activity relationship of bicyclic peptides for cell entry. These peptides may be considered minimal analogues of naturally occurring oligocyclic peptide toxins and are a promising scaffold for the design of bioactive molecules. Increasing numbers of arginine residues that are primarily contributing to cell-penetrating activity were introduced either into the cycles, or as stretches outside the cycles, at both ends or at one end only. In addition, we probed for the impact of negatively charged residues on activity for both patterns of arginine substitution. Uptake was investigated in HeLa cells by flow cytometry and confocal microscopy. Overall, uptake efficiency showed a positive correlation with the number of arginine residues. The subcellular distribution was indicative of endocytic uptake. One linear stretch of arginines coupled outside the bicycle was as effective in promoting uptake as substituting the same number of arginines inside the bicycles. However, the internally substituted analogues were more sensitive to the presence of negatively charged residues. For a given bicyclic peptide, uptake was more effective than for the linear counterpart. Introduction of histidine and tryptophans further increased uptake efficiency to comparable levels as that of nonaarginine despite the larger size of the bicyclic backbone. The results demonstrate that both arginine clustering and spatial constraints are uptake-promoting structural principles, an observation that gives freedom in the introduction of cell-penetrating capacity to structurally constrained scaffolds.

Folding dynamics of the Trp-cage miniprotein: evidence for a native-like intermediate from combined time-resolved vibrational spectroscopy and molecular dynamics simulations.

Trp-cage is a synthetic 20-residue miniprotein which folds rapidly and spontaneously to a well-defined globular structure more typical of larger proteins. Due to its small size and fast folding, it is an ideal model system for experimental and theoretical investigations of protein folding mechanisms. However, Trp-cage's exact folding mechanism is still a matter of debate. Here we investigate Trp-cage's relaxation dynamics in the amide I' spectral region (1530-1700 cm(-1)) using time-resolved infrared spectroscopy. Residue-specific information was obtained by incorporating an isotopic label ((13)C═(18)O) into the amide carbonyl group of residue Gly11, thereby spectrally isolating an individual 310-helical residue. The folding-unfolding equilibrium is perturbed using a nanosecond temperature-jump (T-jump), and the subsequent re-equilibration is probed by observing the time-dependent vibrational response in the amide I' region. We observe bimodal relaxation kinetics with time constants of 100 ± 10 and 770 ± 40 ns at 322 K, suggesting that the folding involves an intermediate state, the character of which can be determined from the time- and frequency-resolved data. We find that the relaxation dynamics close to the melting temperature involve fast fluctuations in the polyproline II region, whereas the slower process can be attributed to conformational rearrangements due to the global (un)folding transition of the protein. Combined analysis of our T-jump data and molecular dynamics simulations indicates that the formation of a well-defined α-helix precedes the rapid formation of the hydrophobic cage structure, implying a native-like folding intermediate, that mainly differs from the folded conformation in the orientation of the C-terminal polyproline II helix relative to the N-terminal part of the backbone. We find that the main free-energy barrier is positioned between the folding intermediate and the unfolded state ensemble, and that it involves the formation of the α-helix, the 310-helix, and the Asp9-Arg16 salt bridge. Our results suggest that at low temperature (T ≪ Tm) a folding path via formation of α-helical contacts followed by hydrophobic clustering becomes more important.

Synthesis of water-soluble scaffolds for peptide cyclization, labeling, and ligation.

The synthesis and applications of water-soluble scaffolds that conformationally constrain side chain unprotected linear peptides containing two cysteines are described. These scaffolds contain a functionality with orthogonal reactivity to be used for labeling and ligation. This is illustrated by the chemical ligation of two dissimilar constrained peptides via oxime ligation or strain-promoted azide-alkyne cycloaddition in aqueous media.

Monitoring selectivity in kinase-promoted phosphorylation of densely packed peptide monolayers using label-free electrochemical detection.

This paper describes remarkably high sensitivities in the label-free detection of kinase-promoted phosphorylation for 14 different peptide substrates on electrode-immobilized monolayers (gold or nitride) using serine/threonine kinases PKA, PKC, and CaMK2. Peptide substrates were preselected using (33)P-labeling in a microarray of 1024 substrates. The three most active peptides (A1-A3, C1-C3, and M1-M3) were investigated using electrochemical impedance spectroscopy (EIS) and ion-sensitive field effect transistors (ISFETs). Some of the peptide substrates, for example, the PKC-specific substrate PPRRSSIRNAH (C1), showed a remarkably high sensitivity in the EIS-based sensor measurements. Our studies revealed that this high sensitivity is primarily due to the monolayer's packing density. Nanoscopic studies demonstrated a distinct disordering of the C1-monolayer upon phosphorylation, while phosphatase-promoted dephosphorylation regenerated the highly ordered peptide monolayer. As a matter of fact, the initial surface packing of the peptide monolayer mainly determined the level of sensitivity, whereas electrostatic repulsion of the redox-active species was found to be much less important.

Epitope characterization and crystal structure of GA101 provide insights into the molecular basis for type I/II distinction of CD20 antibodies.

CD20 is a cell-surface marker of normal and malignant B cells. Rituximab, a monoclonal antibody targeting CD20, has improved the treatment of malignant lymphomas. Therapeutic CD20 antibodies are classified as either type I or II based on different mechanisms of killing malignant B cells. To reveal the molecular basis of this distinction, we fine-mapped the epitopes recognized by both types. We also determined the first X-ray structure of a type II antibody by crystallizing the obinutuzumab (GA101) Fab fragment alone and in complex with a CD20 cyclopeptide. Despite recognizing an overlapping epitope, GA101 binds CD20 in a completely different orientation than type I antibodies. Moreover, the elbow angle of GA101 is almost 30° wider than in type I antibodies, potentially resulting in different spatial arrangements of 2 CD20 molecules bound to a single GA101 or rituximab molecule. Using protein tomography, different CD20 complexes were found to be associated with the 2 antibodies, and confocal microscopy showed different membrane compartmentalization of these subpopulations of the cellular CD20 pool. Our findings offer a possible molecular explanation for the different cellular responses elicited by type I and II antibodies.

Binding of CDR-derived peptides is mechanistically different from that of high-affinity parental antibodies.

We present data that reveal crucial differences between the binding mode of anti-gastrin17 (G17, pyroEGPWLEEEEEAYGWMDF-NH(2)) monoclonal antibodies (mAbs) and their CDR-derived synthetic binders (SBs) with G17. The mAbs recognize the N-terminal sequence of G17 (pyroEGPWL) with nanomolar affinity and high sequence selectivity. Molecular simulations suggest that G17 recognition is based primarily on a multitude of weak antibody-ligand interactions (H-bonding, van der Waals, etc.) inside a structurally well-defined cleft-like binding pocket. Relatively small structural changes (e.g. G-2 to A for G17) have a drastic impact on affinity, which is characteristic for antibody-like binding. In contrast, SBs recognize various sequences, including G17-unrelated targets with affinities of 1:1 complexes estimated in the 0.1-1.0 mM range. In most cases however, the G17/SB complex stoichiometries are not well-defined, giving rise to multimer aggregate formation with high apparent complex stabilities. Mutational studies on both G17 and SBs reveal the importance of positively charged (K/R) and aromatic residues (W/Y/F) for G17/SB complex formation. We propose that the synthetic binders use combinations of electrostatic, hydrophobic, and/or cation-π interactions in a variety of ways due to their intrinsic flexibility. This may also be the reason for their relatively low target specificity. We speculate that our findings are of general relevance, in showing that high-affinity mAbs do not necessarily provide the optimal basis for functional mimics design.