RESUMO
The search for greater speed of analysis has fueled many innovations in high-performance liquid chromatography (HPLC), such as the use of higher pressures and smaller stationary-phase particles, and the development of monolithic columns. Alternatively, one might alter the chromatographic mobile phase. The low viscosity and high diffusivity of the mobile phase in supercritical fluid chromatography (SFC) allows higher flow rates and lower pressure drops than is possible in traditional HPLC. In addition, SFC requires less organic, or aqueous-organic, solvent than LC (important in preparative-scale chromatography) and provides an alternative, normal-phase retention mechanism. But fluids that are commonly used as the main mobile-phase component in SFC, such as CO2, are relatively nonpolar. As a result, SFC is commonly believed to only be applicable to nonpolar and relatively low-polarity compounds. Here we build upon recent work with SFC of polar and ionic compounds and peptides, and we compare the LC/MS and SFC/MS of a diverse library of druglike compounds. A total of 75.0% of the library compounds were eluted and detected by SFC/MS, while 79.4% were eluted and detected by LC/MS. Some samples provided strong peaks that appeared to be related to the purported compound contained in the sample. When these were added to the "hits", the numbers rose to 86.7 and 89.9%, respectively. A total of 3.7% of the samples were observed by SFC/MS, but not by LC/MS, and 8.1% of the samples were observed by LC/MS, but not by SFC/MS. The only compound class that appeared to be consistently detected in LC/MS, but not in SFC/MS under our conditions, consisted of compounds containing a phosphate, a phosphonate, or a bisphosphonate. The SFC/MS method was at least as durable, reliable, and user-friendly as the LC/MS method. The APCI source required less cleaning during the SFC/MS separations than it did during LC/MS.
Assuntos
Cromatografia Líquida de Alta Pressão/métodos , Cromatografia com Fluido Supercrítico/métodos , Espectrometria de Massas/métodos , Preparações Farmacêuticas/químicaRESUMO
The stability of approximately 7200 compounds stored as 20-mM DMSO solutions under ambient conditions was monitored for 1 year. Compound integrity was measured by flow injection analysis using positive and negative electrospray ionization mass spectrometry. Each sample was assessed at the beginning of the study, after 12 months of storage, and at a randomized time point between the initial and final time points of the study. The relationship between length of storage and the probability of observing the compound was described by a repeated-measures logistic regression model. The probability of observing the compound was 92% after 3 months of storage at room temperature, 83% after 6 months, and 52% after 1 year in DMSO. An acceptable limit for compound loss and corresponding maximum storage time for samples in DMSO can be determined based on these results.
Assuntos
Dimetil Sulfóxido/metabolismo , Estabilidade de Medicamentos , Armazenamento de Medicamentos , Solventes/metabolismo , Temperatura , Preparações Farmacêuticas/química , Preparações Farmacêuticas/metabolismo , Distribuição Aleatória , Análise de Regressão , Soluções/químicaRESUMO
A diverse set of 320 compounds from the Procter & Gamble Pharmaceuticals organic compound repository was prepared as 20-mM DMSO solutions and stored at 4 degrees C under argon in pressurized canisters to simulate a low-humidity environment. The plates were subjected to 25 freeze/thaw cycles while being exposed to ambient atmospheric conditions after each thaw to simulate the time and manner by which compound plates are exposed to the atmosphere during typical liquid-handling and high-throughput screening processes. High-performance liquid chromatography-mass spectrometry with evaporative light-scattering detection was used to quantitate the amount of compound remaining after every 5th freeze/thaw cycle. Control plates were stored either at room temperature under argon or at 4 degrees C under argon without freeze/thaw cycling and were evaluated at the midpoint and the endpoint of the study. The study was conducted over a short time period (i.e., 7 weeks) to minimize the effect of compound degradation over time due to the exposure of the compounds to DMSO. The results from this study will be used to determine the maximum number of freeze/thaw cycles that can be achieved while maintaining acceptable compound integrity.