Probing Basal and Prismatic Planes of Graphitic Materials for Metal Single Atom and Subnanometer Cluster Stabilization.

Supported metal single atom catalysis is a dynamic research area in catalysis science combining the advantages of homogeneous and heterogeneous catalysis. Understanding the interactions between metal single atoms and the support constitutes a challenge facing the development of such catalysts, since these interactions are essential in optimizing the catalytic performance. For conventional carbon supports, two types of surfaces can contribute to single atom stabilization: the basal planes and the prismatic surface; both of which can be decorated by defects and surface oxygen groups. To date, most studies on carbon-supported single atom catalysts focused on nitrogen-doped carbons, which, unlike classic carbon materials, have a fairly well-defined chemical environment. Herein we report the synthesis, characterization and modeling of rhodium single atom catalysts supported on carbon materials presenting distinct concentrations of surface oxygen groups and basal/prismatic surface area. The influence of these parameters on the speciation of the Rh species, their coordination and ultimately on their catalytic performance in hydrogenation and hydroformylation reactions is analyzed. The results obtained show that catalysis itself is an interesting tool for the fine characterization of these materials, for which the detection of small quantities of metal clusters remains a challenge, even when combining several cutting-edge analytical methods.

Cd3P2/Zn3P2 Core-Shell Nanocrystals: Synthesis and Optical Properties.

II-V semiconductor nanocrystals such as Cd3P2 and Zn3P2 have enormous potential as materials in next-generation optoelectronic devices requiring active optical properties across the visible and infrared range. To date, this potential has been unfulfilled due to their inherent instability with respect to air and moisture. Core-shell system Cd3P2/Zn3P2 is synthesized and studied from structural (morphology, crystallinity, shell diameter), chemical (composition of core, shell, and ligand sphere), and optical perspectives (absorbance, emission-steady state and time resolved, quantum yield, and air stability). The improvements achieved by coating with Zn3P2 are likely due to its identical crystal structure to Cd3P2 (tetragonal), highlighting the key role crystallographic concerns play in creating cutting edge core-shell NCs.

Sustainable quantum dot chemistry: effects of precursor, solvent, and surface chemistry on the synthesis of Zn3P2 nanocrystals.

The quest of exploring alternative materials for the replacement of toxic cadmium- and lead-based quantum dots (QDs) is necessary for envisaging a sustainable future but remains highly challenging. Tackling this issue, we present the synthesis of Zn3P2 nanocrystals (NCs) of unprecedented quality. New, reactive zinc precursors yield highly crystalline, colloidally stable particles, exhibiting oxide-free surfaces, size tunability and outstanding optical properties relative to previous reports of zinc phosphide QDs.

Charge transfer and electronic doping in nitrogen-doped graphene.

Understanding the modification of the graphene's electronic structure upon doping is crucial for enlarging its potential applications. We present a study of nitrogen-doped graphene samples on SiC(000) combining angle-resolved photoelectron spectroscopy, scanning tunneling microscopy and spectroscopy and X-ray photoelectron spectroscopy (XPS). The comparison between tunneling and angle-resolved photoelectron spectra reveals the spatial inhomogeneity of the Dirac energy shift and that a phonon correction has to be applied to the tunneling measurements. XPS data demonstrate the dependence of the N 1s binding energy of graphitic nitrogen on the nitrogen concentration. The measure of the Dirac energy for different nitrogen concentrations reveals that the ratio usually computed between the excess charge brought by the dopants and the dopants' concentration depends on the latter. This is supported by a tight-binding model considering different values for the potentials on the nitrogen site and on its first neighbors.

Electronic interaction between nitrogen atoms in doped graphene.

Many potential applications of graphene require either the possibility of tuning its electronic structure or the addition of reactive sites on its chemically inert basal plane. Among the various strategies proposed to reach these objectives, nitrogen doping, i.e., the incorporation of nitrogen atoms in the carbon lattice, leads in most cases to a globally n-doped material and to the presence of various types of point defects. In this context, the interactions between chemical dopants in graphene have important consequences on the electronic properties of the systems and cannot be neglected when interpreting spectroscopic data or setting up devices. In this report, the structural and electronic properties of complex doping sites in nitrogen-doped graphene have been investigated by means of scanning tunneling microscopy and spectroscopy, supported by density functional theory and tight-binding calculations. In particular, based on combined experimental and simulation works, we have systematically studied the electronic fingerprints of complex doping configurations made of pairs of substitutional nitrogen atoms. Localized bonding states are observed between the Dirac point and the Fermi level in contrast with the unoccupied state associated with single substitutional N atoms. For pyridinic nitrogen sites (i.e., the combination of N atoms with vacancies), a resonant state is observed close to the Dirac energy. This insight into the modifications of electronic structure induced by nitrogen doping in graphene provides us with a fair understanding of complex doping configurations in graphene, as it appears in real samples.

Grain boundaries in graphene on SiC(0001Ì ) substrate.

Grain boundaries in epitaxial graphene on the SiC(0001̅) substrate are studied using scanning tunneling microscopy and spectroscopy. All investigated small-angle grain boundaries show pronounced out-of-plane buckling induced by the strain fields of constituent dislocations. The ensemble of observations determines the critical misorientation angle of buckling transition θc = 19 ± 2°. Periodic structures are found among the flat large-angle grain boundaries. In particular, the observed θ = 33 ± 2° highly ordered grain boundary is assigned to the previously proposed lowest formation energy structural motif composed of a continuous chain of edge-sharing alternating pentagons and heptagons. This periodic grain boundary defect is predicted to exhibit strong valley filtering of charge carriers thus promising the practical realization of all-electric valleytronic devices.

Identification of nitrogen dopants in single-walled carbon nanotubes by scanning tunneling microscopy.

Using scanning tunnelling microscopy and spectroscopy, we investigated the atomic and electronic structure of nitrogen-doped single walled carbon nanotubes synthesized by chemical vapor deposition. The insertion of nitrogen in the carbon lattice induces several types of point defects involving different atomic configurations. Spectroscopic measurements on semiconducting nanotubes reveal that these local structures can induce either extended shallow levels or more localized deep levels. In a metallic tube, a single doping site associated with a donor state was observed in the gap at an energy close to that of the first van Hove singularity. Density functional theory calculations reveal that this feature corresponds to a substitutional nitrogen atom in the carbon network.

Evidence for metal-semiconductor transitions in twisted and collapsed double-walled carbon nanotubes by scanning tunneling microscopy.

The atomic and electronic structure of a twisted and collapsed double-walled carbon nanotube was characterized using scanning tunneling microscopy and spectroscopy. It was found that the deformation opens an electronic band gap in an otherwise metallic nanotube, which has major ramifications on the use of carbon nanotubes for electronic applications. Fundamentally, the importance of the intershell interaction in this double-walled carbon nanotube points to the potential of a reversible metal-semiconductor junction, which can have device applications, as well as a caution in the design of semiconductor components based on carbon nanotubes. Lattice registry effects between the two neighboring walls evidenced by atomically resolved images confirm earlier first principle calculations indicating that the helicity influences the collapsed structure and show excellent agreement with the predicted twisted-collapse mode.

Bulk electrical properties of single-walled carbon nanotubes immobilized by dielectrophoresis: evidence of metallic or semiconductor behavior.

We report the electrical characterization of single-walled carbon nanotubes (SWCNTs) trapped between two electrodes by dielectrophoresis (DEP). At high frequency, SWCNTs collected by DEP are expected to be of metallic type. Indeed current-voltage (I-V) measurements for devices made at 10 MHz show high values of conductivity and exhibit metallic behavior with linear and symmetric electrical features attributed to ohmic conduction. At low frequency, SWCNTs attracted by DEP are expected to be of semiconducting nature. Devices made at 10 kHz behave as semiconductors and demonstrate nonlinear and rectifying electrical characteristics with conductivities many orders of magnitude below the sample resulting from high-frequency immobilization of SWCNTs. Conducting atomic force microscopy (C-AFM) and current density calculation results are presented to reinforce results obtained by I-V measurements which clearly show type separation of SWCNTs after DEP experiments.

Registry-induced electronic superstructure in double-walled carbon nanotubes, associated with the interaction between two graphene-like monolayers.

Prior to the implementation of multi-walled carbon nanotubes in microelectronic devices, investigating their electronic structure down to the nanometer scale is necessary. In that prospect, we used scanning tunneling microscopy (STM) to study the detailed atomic scale structure of double-walled carbon nanotubes, each comprising two rolled monolayers of graphene. Atomically resolved STM images usually displayed a motif and periodicity similar to that found in graphite but, on selected regions, atomically resolved motifs with a clearly defined superstructure were observed. This phenomenon has been reported previously but without a suitable explanation. We discuss the origin of this behavior in terms of modified stacking sequences due to the mismatch in registry between the chiral angles of the inner and the outer shells, associated with the interaction between the two carbon monolayers. These phenomena must be taken into account for the realization of lateral interference devices based on carbon nanotubes or graphene layers.

Inner-tube chirality determination for double-walled carbon nanotubes by scanning tunneling microscopy.

Evidence for modified electronic structure in double-walled carbon nanotubes with respect to their individual inner and outer constituent single-walled nanotubes is provided by scanning tunneling microscopy and spectroscopy experiments. The contribution originating from the inner tube to the local density of states of the double-walled system was identified in agreement with previous theoretical calculations. Consequently, the chiral index for the inner tube was extracted based on the additional van Hove singularities present in the experimental tunneling spectra.

Controlled growth-reversal of catalytic carbon nanotubes under electron-beam irradiation.

The growth of carbon nanotubes from Ni catalysts is reversed and observed in real time in a transmission electron microscope, at room temperature. The Ni catalyst is found to be Ni3C and remains attached to the nanotube throughout the irradiation sequence, indicating that C most likely diffuses on the surface of the catalyst to form nanotubes. We calculate the energy barrier for saturating the Ni3C (2-13) surface with C to be 0.14 eV, thus providing a low-energy surface for the formation of graphene planes.