Biochemical and behavioral responses of zebrafish embryos to magnetic graphene/nickel nanocomposites.

Graphene nanocomposites are emerging carbon-based materials with interesting electrical, mechanical, optical and magnetic properties, relevant for applications in different fields. Despite this increased use, the impact of graphene nanocomposites residues in the environment has not been properly studied. Thus, the goal of this work was to assess the toxicity of two nickel/graphene nanocomposites (G/Ni1 and G/Ni2) differing in size and shape to Danio rerio embryos. Their toxicity was evaluated using apical (mortality, development and hatching), biochemical [cholinesterase (ChE), glutathione-S-transferase (GST), and catalase (CAT) activities] and behavioral (locomotor activity) endpoints. At the tested concentrations, neither of the nanocomposites presented lethal or developmental effects. Nevertheless, both nanocomposites induced behavioral effects, reducing swimming distances. This effect was, however detected at lower concentrations in the G/Ni1 nanocomposite. At biochemical level, only G/Ni1 nanocomposite showed to interfere with the measured parameters, increasing the activities of ChE, CAT and GST. Differences in the effects induced by the two nanocomposites seem to be related not only with their size, but also with the shape and the ability to continuously release nickel ions to aqueous medium. This work highlights the importance of studying graphene nanocomposites effects to aquatic organisms even when acute toxicity is not expected. The relevance of the effects found in this work need to be further analyzed in light of the consequences to the long-term fitness of the organisms and in light of the environmental concentrations expected for this type of compounds.

Reduced graphene oxide-nickel nanoparticles/biopolymer composite films for the sub-millimolar detection of glucose.

Hybrid conjugates of graphene with metallic/semiconducting nanostructures can improve the sensitivity of electrochemical sensors due to their combination of well-balanced electrical/electrocatalytic properties and superior surface-to-volume ratio. In this study, the synthesis and physical characterization of a hybrid conjugate of reduced graphene oxide and nickel nanoparticles (rGO-Ni NPs) is presented. The conjugate was further deposited onto a glassy carbon electrode as a nanocomposite film of chitosan and glucose oxidase. The electrochemical response and morphology of the films were investigated using SEM, CV, and EIS, and their applications as a glucose biosensor explored for the first time in proof-of-concept tests. The low operating potential along with the good linearity and sensitivity (up to 129 µA cm(-2) mM(-1)) found in the sub-millimolar range suggest potential applications in the self-management of hypoglycemia from blood samples or in the development of non-invasive assays for body fluids such as saliva, tears or breath.

Fabrication of a glucose biosensor based on citric acid assisted cobalt ferrite magnetic nanoparticles.

A novel and practical glucose biosensor was fabricated with immobilization of Glucose oxidase (GOx) enzyme on the surface of citric acid (CA) assisted cobalt ferrite (CF) magnetic nanoparticles (MNPs). This innovative sensor was constructed with glassy carbon electrode which is represented as (GOx)/CA-CF/(GCE). An explicit high negative zeta potential value (-22.4 mV at pH 7.0) was observed on the surface of CA-CF MNPs. Our sensor works on the principle of detection of H2O2 which is produced by the enzymatic oxidation of glucose to gluconic acid. This sensor has tremendous potential for application in glucose biosensing due to the higher sensitivity 2.5 microA/cm2-mM and substantial increment of the anodic peak current from 0.2 microA to 10.5 microA.

Wet-chemical green synthesis of L-lysine amino acid stabilized biocompatible iron-oxide magnetic nanoparticles.

In this paper, we report a novel method for the synthesis of L-Lysine (lys) amino acid coated maghemite (gamma-Fe2O3) magnetic nanoparticles (MNPs). The facile and cost effective method permitted preparation of the high-quality superparamagnetic gamma-Fe2O3 MNPs with hydrophilic and biocompatible nature. For this work, first we synthesized magnetite phase Fe3O4/lys by wet chemical method and oxidized to y-Fe2O3 in controlled oxidizing environment, as evidenced by XRD and VSM magnetometry. The crystallite size and magnetization of gamma-Fe2O3/lys MNPs was found to be 14.5 nm, 40.6 emu/gm respectively. The surface functionalization by L-lysine amino acid and metal-ligand bonding was also confirmed by FTIR spectroscopy. The hydrodynamic diameter, colloidal stability and surface charge on MNPs were characterized by DLS and zeta potential analyser.

Temperature dependence of the Henry's law constant for hydrogen storage in NaA zeolites: a Monte Carlo simulation study.

Grand canonical Monte Carlo simulations of hydrogen adsorption in zeolites NaA were carried out for a wide range of temperatures between 77 and 300 K and pressures up to 180 MPa. A potential model was used that comprised of three main interactions: van der Waals, coulombic and induced polarization by the electric field in the system. The computed average number of adsorbed molecules per unit cell was compared with available results and found to be in agreement in the regime of moderate to high pressures. The particle insertion method was used to calculate the Henry coefficient for this model and its dependence on temperature.

Atomic-scale observation of rotational misorientation in suspended few-layer graphene sheets.

Single or few-layer graphene (FLG) sheets offer extraordinary electronic, thermal and mechanical properties and are expected to find a variety of applications. Fully exploiting the properties of graphene will require a method for the production of high-quality graphene sheets (almost pristine graphene) in large quantities. In this regard, we report a two-step method for obtaining a homogenous colloidal suspension of single or FLG sheets up to 0.15 mg ml(-1) in N,N-dimethylformamide solution. The graphene nanostructures are directly imaged using a high-resolution transmission electron microscope (HRTEM) operated at 200 kV with a point resolution of 0.16 nm. We observed rotational misorientation within the flake in the HRTEM images of 2, 4 and 6 layers of graphene sheets, giving rise to Moiré patterns. By filtering in the frequency domain using a Fourier transform, we reconstruct the graphene lattice of each sheet and determine the relative rotation between consecutive graphene layers up, to six separate sheets. Direct evidence is obtained for FLG sheets with packing that is different to the standard AB Bernal packing of bulk graphite. Furthermore, we observed periodic ripples in suspended graphene sheets in our TEM measurements. Electrostatic force microscopy was used to characterize the electric potential distribution on the surface of FLG sheets on SiO2/Si substrates in ambient conditions. The FLG sheets were found to exhibit a conducting nature with small potential variations on the surface.

Selective growth of vertically aligned carbon nanotubes by double plasma chemical vapour deposition technique.

The selective growth of vertically aligned carbon nanotubes (VACNTs) on large area copper substrates was carried out using a double plasma hot-filament chemical vapour deposition system. Three independent power supplies were used to produce two glow discharges within the vacuum reactor. The generation of two glow discharges and the efficient utilization of the electric fields, by controlling the key process parameters, enabled the production of VACNTs. Morphology, density and structure of carbon nanotubes were characterized using Scanning Electron Microscopy and Raman Spectroscopy.