Liquid Chromatography Coupled to Isotope Ratio Mass Spectrometry Expanded to Include Organic Mobile Phases.

Current commercially available liquid chromatography coupled to isotope ratio mass spectrometry systems (LC-IRMS) oxidize all eluent and thus can only operate with all-aqueous mobile phases, limiting their application to a small subset of analytes and mixtures that can be separated without organic solvents. We report a novel rotating-catalytic disc desolvation device with subsequent laser-activated photocatalytic analyte combustion to create CO2 for high precision carbon isotope ratio measurements compatible with both aqueous and organic liquid mobile phases. Sucrose, glucose, androsterone, or androsterone acetate in 20% and 50% H2O-CH3OH solutions were introduced by flow injection to the interface to IRMS for sugars and steroids, respectively. Sucrose δ13CVPDB linearity was excellent over 1-10 µg (33-655 nmol C) injections, using IRMS compatible He/1%O2 oxidation gas. The limit of precise isotope analysis (LOIA) of δ13CVPDB was 1 µg (35 nmol C) for sucrose and 10 µg (655 nmol C) for androsterone with average precisions of SD(δ13C) ± 0.8‰. Calibration was performed with and bracketed the δ13CVPDB isotope ratio range using androsterone-acetate and glucose. With further development to improve sensitivity and application to chromatography, the prototype proof-of-principle LC-IRMS shows promise to resolve a major drawback in current LC-IRMS systems and may open LC-IRMS to many more compounds than currently possible.

Fatty acid sentinels as covalently bound randomization standards for triacylglycerol (TAG) quantitative analysis.

RATIONALE: Quantitative analysis of triacylglycerols (TAG) is impeded by a lack of standards and the huge number of potential TAG molecular species that may be present due to the combinatorial nature of glycerolipids. Randomization of acyl groups yields TAG mixtures with profiles predictable from fatty acid profiles; however, their use as calibration mixtures has been limited. METHODS: We introduce here the principle of fatty acid isotopic sentinels that are quantitatively added prior to randomization to enable verification that randomization is complete, and that can be used as internal standards. A mixture of two isotopically labeled fatty acid methyl esters (FAME) is prepared at a ratio of 2:1 and the exact ratio is carefully measured by gas chromatography flame ionization detection (GC-FID) and randomized covalently into the acyl groups of TAG mixtures. RESULTS: Reaction with catalytic amounts of NaOCH3 yields complete randomization, such that the product FAME and TAG have the same fatty acid profile. TAG mixture analysis reveals that the isotopic sentinels have been covalently incorporated into the TAG molecular species at <1% deviation from the expected proportions, thus verifying randomization within experimental error. CONCLUSIONS: The sentinel principle demonstrated here as covalently incorporated internal standards verifies that randomization chemistry went to completion. It applies in general to use of combinatorial chemistry for quantitative standards.

Structural Identification of Monounsaturated Branched Chain Fatty Acid Methyl Esters by Combination of Electron Ionization and Covalent Adduct Chemical Ionization Tandem Mass Spectrometry.

Monounsaturated normal fatty acids (n-MUFA) and saturated branched chain fatty acids (BCFA) are structurally characterized by separate tandem mass spectrometry methods for double bond localization and for chain branching in their respective fatty acid methyl ester (FAME) derivatives; however, these methods have never been applied to branched monounsaturated FAME. Here, we report application of electron ionization (EI)-MS/MS and solvent-mediated covalent adduct chemical ionization (CACI)-MS/MS of monounsaturated BCFA methyl esters (MUBCFAME) of a chain length of 15-20 carbons. A novel system was used to implement CI with low vapor pressure reagents in a tabletop triple quadrupole MS. Anteiso-MUBCFA EI-MS/MS of the molecular ion (M) yields a characteristic diagnostic ion [M-29]+. iso-MUBCFA can be distinguished from n-MUFA by an ion intensity ratio of [M-32]+/[M-43]+, with iso-MUBCFA yielding a ratio greater than 1.7, while n-MUFA yields a ratio less than 1.0. Chain branching at the iso and anteiso positions, terminal isopropyl and sec-butyl, respectively, do not alter CACI-MS/MS diagnostic ions compared to normal BCFA, enabling double bond positions of MUBCFA to be determined with the analogous α and ω diagnostic ions from cleavage on both sides of the erstwhile double bond. Taken together, this straightforward FAME-based technique via combination of EI-MS/MS and CACI-MS/MS enables fundamental structural identification of MUBCFA without standards.

Potentially High Value Conjugated Linolenic Acids (CLnA) in Melon Seed Waste.

Conjugated linolenic acids (CLnAs) are natural phytochemicals with known and potential bioactivities in mammals. Established CLnA sources are limited to a few common fruit seeds, notably pomegranate seeds and cherry pits, and the search for alternatives is impeded in part by cumbersome methods for reliable measurement. We investigated CLnA contents in lower value fruit seeds with a recently available facile mass spectrometry method, solvent-mediated chemical ionization, enabling and quantitative analysis. We report for the first time the detection of CLnAs in cantaloupe and honeydew seeds at levels of 2 mg CLnA/g seed kernel. Based on the combined waste stream for these muskmelons of about 1.4 billion pounds in the USA annually, we estimate that the available CLnAs amount to 37.5 tons, similar to cherry pits. Our results suggest the potentially enhanced economic value of a specific class of bioactives that may be extracted from discarded food processing waste.

Low Temperature Catalytic Combustion Reactors for High Precision Carbon Isotope Measurements in Gas Chromatography Combustion Isotope Ratio Mass Spectrometry.

Metal oxide-filled reactors constructed with ceramic tubes or fused silica capillary are widely used for combustion in gas chromatography combustion isotope ratio mass spectrometry (GCC-IRMS). However, they tend to be easily cracked or broken and prone to leaks at operating temperatures of ∼950 °C. Here we introduce a modified commercially available catalytic combustion/reduction methanizer to quantitatively convert organics to CO2 for δ13C analysis while retaining chromatographic resolution. These modified "ARC" reactors operate with a transition-metal catalyst that requires a flowing O2 gas to enable complete conversion to CO2 at lower temperature (620 °C) with acceptable reactor life, reduced complexity, and improved robustness. Performance of two versions of the ARC reactors with different combustion volumes was characterized by analysis of steroid and alkane isotopic standard materials. Linearity of steroid isotopic standards ranged from 0.02 to 0.60 ‰/V in the range of 25 to 200 ng of each steroid injected. Precisions and accuracies of measurements for steroids and alkanes had average standard deviations of SD(δ13C) less than ±0.18 ‰ and average accuracy of better than 0.19 ‰ δ13CVPDB. Peak width expansion within both devices were similar to that in traditionally used metal oxide reactors. These data demonstrate for the first time that novel combustion schemes enable operation at lower temperatures as an alternative approach comparable to high temperature techniques to yield high precision δ13C data with GCC-IRMS.

Cryofocus fast gas chromatography combustion isotope ratio mass spectrometry for rapid detection of synthetic steroid use in sport doping.

Sports doping requires high precision carbon isotope ratio (CIR) analysis of endogenous steroids using gas chromatography-combustion isotope ratio mass spectrometry (GCC-IRMS), however methods are relatively slow and cumbersome. A cryofocusing fast GCC-IRMS (Cryofocus Fast GCC-IRMS) was developed and optimized with minimal peak broadening using a programmable temperature vaporization (PTV) inlet and a low dead volume narrow-bore continuous capillary combustion interface to an IRMS. PTV injection, followed with cryofocusing before steroid analytes were volatilized by a hot jet, was used to initiate chromatography. Compared to ramping temperature using a conventional GC oven, cryofocusing with hot jet volatilization reduced analysis time by a factor of 3 to 4 and reduced peak widths to ∼800 ms. Well separated peak isotope ratios were measured with SD(δ13C) < 0.5‰ over a range of 10-50 ng of each steroid on column and were accurate from 2 ng to 100 ng. Characterization of the current experimental system with well characterized pure steroid isotopic standards demonstrates how the technique can be applied to steroid mixtures derived from real urine samples. Cryofocus Fast GCC-IRMS advances toward the goal of routine CIR testing of steroids in all urine samples for doping control.

High-volume steroid isotopic standards developed as working standards for gas chromatography-combustion-isotope ratio mass spectrometry.

High-precision carbon isotope ratio analysis of urinary steroids by gas chromatography-combustion-isotope ratio mass spectrometry (GC-C-IRMS) is the official test to detect illicit doping of synthetic versions of endogenous steroids, such as testosterone. Our group created the first steroid isotopic standards (SIS) specifically for World Anti-Doping Agency (WADA) accredited laboratories. The standards contain mixtures of steroids as acetates or free steroids at ~400 µg each per ampoule and have been widely distributed to anti-doping laboratories to facilitate comparability of inter-laboratory results. Here we report on the creation and characterization of 3 new high-volume single component SIS suitable for use as working standards. They contain ~50 times more steroid mass per ampoule than previous SIS. The new SIS, coded CU/PCC 40-1, CU/PCC 41-1, & CU/PCC 42-1, contain ~20 mg of androsterone, androsterone-AC, and 5α-cholestane, with determined isotopic values of -27.09 ± 0.07 mUr, -32.82 ± 0.01 mUr, -25.03 ± 0.01 mUr, respectively. We used our previously developed protocol to calibrate the isotopically uniform steroids against the isotopic standard gases methane and ethane in NIST RM 8559 that are traceable to the international standard Vienna PeeDee Belemnite (VPDB). Two sets of data, acquired 7 months apart, of absolute δ13 CVPDB and ∆Δδ13 CVPDB values from 8 randomly selected ampoules of all 3 SIS indicate uniformity of steroid isotopic composition within measurement reproducibility, SD(δ13 C) < 0.2 mUr Our results show that protocols for SIS extend to creation of high volume working standards that can also be used as internal standards under appropriate GC conditions.

Quantifying the contribution of grape hexoses to wine volatiles by high-precision [U¹³C]-glucose tracer studies.

Many fermentation volatiles important to wine aroma potentially arise from yeast metabolism of hexose sugars, but assessing the relative importance of these pathways is challenging due to high endogenous hexose substrate concentrations. To overcome this problem, gas chromatography combustion isotope ratio mass spectrometry (GC-C-IRMS) was used to measure high-precision (13)C/(12)C isotope ratios of volatiles in wines produced from juices spiked with tracer levels (0.01-1 APE) of uniformly labeled [U-(13)C]-glucose. The contribution of hexose to individual volatiles was determined from the degree of (13)C enrichment. As expected, straight-chain fatty acids and their corresponding ethyl esters were derived almost exclusively from hexoses. Most fusel alcohols and their acetate esters were also majority hexose-derived, indicating the importance of anabolic pathways for their formation. Only two compounds were not derived primarily from hexoses (hexanol and isobutyric acid). This approach can be extended to other food systems or substrates for studying precursor-product relationships.

Sensing the wavefront of x-ray free-electron lasers using aerosol spheres.

Characterizing intense, focused x-ray free electron laser (FEL) pulses is crucial for their use in diffractive imaging. We describe how the distribution of average phase tilts and intensities on hard x-ray pulses with peak intensities of 10(21) W/m(2) can be retrieved from an ensemble of diffraction patterns produced by 70 nm-radius polystyrene spheres, in a manner that mimics wavefront sensors. Besides showing that an adaptive geometric correction may be necessary for diffraction data from randomly injected sample sources, our paper demonstrates the possibility of collecting statistics on structured pulses using only the diffraction patterns they generate and highlights the imperative to study its impact on single-particle diffractive imaging.

Toward unsupervised single-shot diffractive imaging of heterogeneous particles using X-ray free-electron lasers.

Single shot diffraction imaging experiments via X-ray free-electron lasers can generate as many as hundreds of thousands of diffraction patterns of scattering objects. Recovering the real space contrast of a scattering object from these patterns currently requires a reconstruction process with user guidance in a number of steps, introducing severe bottlenecks in data processing. We present a series of measures that replace user guidance with algorithms that reconstruct contrasts in an unsupervised fashion. We demonstrate the feasibility of automating the reconstruction process by generating hundreds of contrasts obtained from soot particle diffraction experiments.

Highly sensitive and selective analysis of urinary steroids by comprehensive two-dimensional gas chromatography combined with positive chemical ionization quadrupole mass spectrometry.

Comprehensive two dimensional gas chromatography (GC × GC) provides greater separation space than conventional GC. Because of fast peak elution, a time of flight mass spectrometer (TOFMS) is the usual structure-specific detector of choice. The quantitative capabilities of a novel GC × GC fast quadrupole MS were investigated with electron ionization (EI), and CH(4) or NH(3) positive chemical ionization (PCI) for analysis of endogenous urinary steroids targeted in anti-doping tests. Average precisions for steroid quantitative analysis from replicate urine extractions were 6% (RSD) for EI and 8% for PCI-NH(3). The average limits of detection (LODs) calculated by quantification ions for 12 target steroids spiked into steroid-free urine matrix (SFUM) were 2.6 ng mL(-1) for EI, 1.3 ng mL(-1) for PCI-CH(4), and 0.3 ng mL(-1) for PCI-NH(3), all in mass scanning mode. The measured limits of quantification (LOQs) with full mass scan GC × GC-qMS were comparable with the LOQ values measured by one-dimensional GC-MS in selected ion monitoring (SIM) mode. PCI-NH(3) yields fewer fragments and greater (pseudo)molecular ion abundances than EI or PCI-CH(4). These data show that a benchtop GC × GC-qMS system has the sensitivity, specificity, and resolution to analyze urinary steroids at normal urine concentrations, and that PCI-NH(3), not currently available on most GC × GC-TOFMS instruments, is of particular value for generation of structure-specific ions.

Calibration and data processing in gas chromatography combustion isotope ratio mass spectrometry.

Compound-specific isotope analysis (CSIA) by gas chromatography combustion isotope ratio mass spectrometry (GCC-IRMS) is a powerful technique for the sourcing of substances, such as determination of the geographic or chemical origin of drugs and food adulteration, and it is especially invaluable as a confirmatory tool for detection of the use of synthetic steroids in competitive sport. We review here principles and practices for data processing and calibration of GCC-IRMS data with consideration to anti-doping analyses, with a focus on carbon isotopic analysis ((13)C/(12)C). After a brief review of peak definition, the isotopologue signal reduction methods of summation, curve-fitting, and linear regression are described and reviewed. Principles for isotopic calibration are considered in the context of the Δ(13)C = δ(13)C(M) - δ(13)C(E) difference measurements required for establishing adverse analytical findings for metabolites (M) relative to endogenous (E) reference compounds. Considerations for the anti-doping analyst are reviewed.

Comprehensive 2-dimensional gas chromatography fast quadrupole mass spectrometry (GC × GC-qMS) for urinary steroid profiling: mass spectral characteristics with chemical ionization.

Comprehensive 2-dimensional gas chromatography (GC × GC), coupled to either a time of flight mass spectrometry (TOF-MS) or a fast scanning quadrupole MS (qMS) has greatly increased the peak capacity and separation space compared to conventional GC-MS. However, commercial GC × GC-TOFMS systems are not equipped with chemical ionization (CI) and do not provide dominant molecular ions or enable single ion monitoring for maximal sensitivity. A GC × GC-qMS in mass scanning mode was investigated with electron ionization (EI) and positive CI (PCI), using CH(4) and NH(3) as reagent gases. Compared to EI, PCI-NH(3) produced more abundant molecular ions and high mass, structure-specific ions for steroid acetates. Chromatography in two dimensions was optimized with a mixture of 12 endogenous and 3 standard acetylated steroids (SM15-AC) relevant to doping control. Eleven endogenous target steroid acetates were identified in normal urine based on their two retention times, and EI and PCI-NH(3) mass spectra; nine of these endogenous target steroid acetates were identified in congenital adrenal hyperplasia (CAH) patients. The difference between the urinary steroids profiles of normal individuals and those from CAH patients can easily be visually distinguished by their GC × GC-qMS chromatograms. We focus here on the comparison and interpretation of the various mass spectra of the targeted endogenous steroids. PCI-NH(3) mass spectra were most useful for unambiguous molecular weight determination and for establishing the number of -OH by the losses of one or more acetate groups. We conclude that PCI-NH(3) with GC × GC-qMS provides improved peak capacity and pseudomolecular ions with structural specificity.

Detection of synthetic testosterone use by novel comprehensive two-dimensional gas chromatography combustion-isotope ratio mass spectrometry.

We report the first demonstration of comprehensive two-dimensional gas chromatography combustion-isotope ratio mass spectrometry (GC×GCC-IRMS) for the analysis of urinary steroids to detect illicit synthetic testosterone use, of interest in sport doping. GC coupled to IRMS (GCC-IRMS) is currently used to measure the carbon isotope ratios (CIRs, δ(13)C) of urinary steroids in antidoping efforts; however, extensive cleanup of urine extracts is required prior to analysis to enable baseline separation of target steroids. With its greater separation capabilities, GC×GC has the potential to reduce sample preparation requirements and enable CIR analysis of minimally processed urine extracts. Challenges addressed include online reactors with minimized dimensions to retain narrow peak shapes, baseline separation of peaks in some cases, and reconstruction of isotopic information from sliced steroid chromatographic peaks. Difficulties remaining include long-term robustness of online reactors and urine matrix effects that preclude baseline separation and isotopic analysis of low-concentration and trace components. In this work, steroids were extracted, acetylated, and analyzed using a refined, home-built GC×GCC-IRMS system. 11-Hydroxyandrosterone and 11-ketoetiocolanolone were chosen as endogenous reference compounds because of their satisfactory signal intensity, and their CIR was compared to target compounds androsterone and etiocholanolone. Separately, a GC×GC-quadrupole MS system was used to measure testosterone (T)/epitestosterone (EpiT) concentration ratios. Urinary extracts of urine pooled from professional athletes and urine from one individual that received testosterone gel (T-gel) and one individual that received testosterone injections (T-shots) were analyzed. The average precisions of δ(13)C and Δδ(13)C measurements were SD(δ(13)C) approximately ±1‰ (n = 11). The T-shot sample resulted in a positive for T use with a T/EpiT ratio of >9 and CIR measurements of Δδ(13)C > 5‰, both fulfilling World Anti-Doping Agency criteria. These data show for the first time that synthetic steroid use is detectable by GC×GCC-IRMS without the need for extensive urine cleanup.

Steroid isotopic standards for gas chromatography-combustion isotope ratio mass spectrometry (GCC-IRMS).

Carbon isotope ratio (CIR) analysis of urinary steroids using gas chromatography-combustion isotope ratio mass spectrometry (GCC-IRMS) is a recognized test to detect illicit doping with synthetic testosterone. There are currently no universally used steroid isotopic standards (SIS). We adapted a protocol to prepare isotopically uniform steroids for use as a calibrant in GCC-IRMS that can be analyzed under the same conditions as used for steroids extracted from urine. Two separate SIS containing a mixture of steroids were created and coded CU/USADA 33-1 and CU/USADA 34-1, containing acetates and native steroids, respectively. CU/USADA 33-1 contains 5alpha-androstan-3beta-ol acetate (5alpha-A-AC), 5alpha-androstan-3alpha-ol-17-one acetate (androsterone acetate, A-AC), 5beta-androstan-3alpha-ol-11, 17-dione acetate (11-ketoetiocholanolone acetate, 11k-AC) and 5alpha-cholestane (Cne). CU/USADA 34-1 contains 5beta-androstan-3alpha-ol-17-one (etiocholanolone, E), 5alpha-androstan-3alpha-ol-17-one (androsterone, A), and 5beta-pregnane-3alpha, 20alpha-diol (5betaP). Each mixture was prepared and dispensed into a set of about 100 ampoules using a protocol carefully designed to minimize isotopic fractionation and contamination. A natural gas reference material, NIST RM 8559, traceable to the international standard Vienna PeeDee Belemnite (VPDB) was used to calibrate the SIS. Absolute delta(13)C(VPDB) and Deltadelta(13)C(VPDB) values from randomly selected ampoules from both SIS indicate uniformity of steroid isotopic composition within measurement reproducibility, SD(delta(13)C)<0.2 per thousand. This procedure for creation of isotopic steroid mixtures results in consistent standards with isotope ratios traceable to the relevant international reference material.

Comprehensive two-dimensional gas chromatography combustion isotope ratio mass spectrometry.

We report the first coupling of comprehensive two-dimensional gas chromatography (GC x GC) to online combustion isotope ratio mass spectrometry (C-IRMS). A GC x GC system, equipped with a longitudinally modulated cryogenic system (LMCS), was interfaced to an optimized low dead volume combustion interface to preserve <300 ms full width at half-maximum (fwhm) fast GC peaks generated on the second GC column (GC2). The IRMS detector amplifiers were modified by configuration of resistors and capacitors to enable fast response, and a home-built system acquired data at 25 Hz. Software was home-written to handle isotopic time shifts of less than one bin (40 ms) and to integrate peak slices to recover isotope ratios from cryogenically sliced peaks. The performance of the GC x GCC-IRMS system was evaluated by isotopic analysis of urinary steroid standards. Steroids were separated by a nonpolar GC1 column (30 m x 0.25 mm, 5% phenyl), modulated into multiple 4- or 8-s cryogenic slices by the LMCS, and then separated on a polar GC2 column (1 or 2 m x 0.1 mm, 50% phenyl). GC2 peak widths from a 1-m column averaged 276 ms fwhm. Steroid standard sliced peaks were successfully reconstructed to yield delta(13)C VPDB values with average precisions of SD(delta(13)C) = 0.30 per thousand and average accuracies within 0.34 per thousand, at 8 ng on column. Two steroids, coeluting in GC1, were baseline separated in GC2 and resulted in delta(13)C VPDB values with average precisions of SD(delta(13)C) = 0.86 per thousand and average accuracies within 0.26 per thousand, at 3 ng on column. Results from this prototype system demonstrate that the enhanced peak capacity and signal available in GC x GC is compatible with high-precision carbon isotope analysis.

Online aerosol mass spectrometry of single micrometer-sized particles containing poly(ethylene glycol).

The analysis of poly(ethylene glycol) (PEG)-containing particles by online single particle aerosol mass spectrometers equipped with laser desorption/ionization (LDI) is reported. We demonstrate that PEG-containing particles are useful in the development of aerosol mass spectrometers because of their ease of preparation, low cost, and inherently recognizable mass spectra. Solutions containing millimolar quantities of PEGs were nebulized and, after drying, the resultant micrometer-sized PEG-containing particles were sampled. LDI (266 nm) of particles containing NaCl and PEG molecules of average molecular weight<500 Da generated mass spectra reminiscent of mass spectra of PEG collected by other mass spectrometer platforms including the characteristic distribution of positive ions (Na+ adducts) separated by the 44 m/z units of the ethylene oxide units separating each degree of polymerization. PEGs of average molecular weight>500 Da were detected from particles that also contained the tripeptide tyrosine-tyrosine-tyrosine or 2,5-dihydroxybenzoic acid, which were added to nebulized solutions to act as matrices to assist LDI using pulsed 266 nm and 355 nm lasers, respectively. Experiments were performed on two aerosol mass spectrometers, one reflectron and one linear, that each utilize two time-of-flight mass analyzers to detect positive and negative ions created from a single particle. PEG-containing particles are currently being employed in the optimization of our bioaerosol mass spectrometers for the application of measurements of complex biological samples, including human effluents, and we recommend that the same strategies will be of great utility to the development of any online aerosol LDI mass spectrometer platform.

Following the biochemical and morphological changes of Bacillus atrophaeus cells during the sporulation process using Bioaerosol Mass Spectrometry.

Bioaerosol Mass Spectrometry (BAMS), a real-time single cell analytical technique, was used to follow the biochemical and morphological changes within a group of Bacillus atrophaeus cells by measuring individual cells during the process of sporulation. A mutant of B. atrophaeus that lacks the ability to produce dipicolinic acid (DPA) was also analyzed. Single cell aerodynamic sizing was used to follow gross morphological changes, and chemical analysis of single cells by mass spectrometry was used to follow some biochemical changes of B. atrophaeus cells during endospore formation.

Desorption/ionization fluence thresholds and improved mass spectral consistency measured using a flattop laser profile in the bioaerosol mass spectrometry of single Bacillus endospores.

Bioaerosol mass spectrometry is being developed to analyze and identify biological aerosols in real time. Mass spectra of individual Bacillus endospores were measured with a bipolar aerosol time-of-flight mass spectrometer in which molecular desorption and ionization were produced using a single laser pulse from a Q-switched, frequency-quadrupled Nd:YAG laser that was modified to have an approximately flattop profile. The flattened laser profile allowed the minimum fluence required to desorb and ionize significant numbers of ions from single aerosol particles to be determined. For Bacillus spores, this threshold had a mean value of approximately 1 nJ/microm(2) (0.1 J/cm(2)). Thresholds for individual spores, however, could apparently deviate by 20% or more from the mean. Threshold distributions for clumps of MS2 bacteriophage and bovine serum albumin were subsequently determined. Finally, the flattened profile was observed to increase the reproducibility of single-spore mass spectra. This is consistent with the general conclusions of our earlier paper on the fluence dependence of single-spore mass spectra and is particularly significant because it is expected to enable more robust differentiation and identification of single bioaerosol particles.

Bioaerosol mass spectrometry for rapid detection of individual airborne Mycobacterium tuberculosis H37Ra particles.

Single-particle laser desorption/ionization time-of-flight mass spectrometry, in the form of bioaerosol mass spectrometry (BAMS), was evaluated as a rapid detector for individual airborne, micron-sized, Mycobacterium tuberculosis H37Ra particles, comprised of a single cell or a small number of clumped cells. The BAMS mass spectral signatures for aerosolized M. tuberculosis H37Ra particles were found to be distinct from M. smegmatis, Bacillus atrophaeus, and B. cereus particles, using a distinct biomarker. This is the first time a potentially unique biomarker was measured in M. tuberculosis H37Ra on a single-cell level. In addition, M. tuberculosis H37Ra and M. smegmatis were aerosolized into a bioaerosol chamber and were sampled and analyzed using BAMS, an aerodynamic particle sizer, a viable Anderson six-stage sampler, and filter cassette samplers that permitted direct counts of cells. In a background-free environment, BAMS was able to sample and detect M. tuberculosis H37Ra at airborne concentrations of >1 M. tuberculosis H37Ra-containing particles/liter of air in 20 min as determined by direct counts of filter cassette-sampled particles, and concentrations of >40 M. tuberculosis H37Ra CFU/liter of air in 1 min as determined by using viable Andersen six-stage samplers. This is a first step toward the development of a rapid, stand-alone airborne M. tuberculosis particle detector for the direct detection of M. tuberculosis bioaerosols generated by an infectious patient. Additional instrumental development is currently under way to make BAMS useful in realistic environmental and respiratory particle backgrounds expected in tuberculosis diagnostic scenarios.