One Piece CAD/CAM Abutment for Screw-Retained Single-Tooth Restorations: A 5-Year Prospective Cohort Study.

BACKGROUND: The use of ceramic-coated patient-specific CAD/CAM titanium abutments represents a therapeutic option for the rehabilitation of single tooth. The utilization of highly customized abutments enables the accurate three-dimensional positioning of the prosthetic emergence. This study evaluates the clinical performance of implant-prosthetic rehabilitations carried out using ceramic-coated CAD/CAM titanium abutments. MATERIALS AND METHODS: Thirty implants were placed in thirty patients and rehabilitated with thirty single crowns attached to CAD/CAM titanium abutments. A conventional procedure was applied, with implant placement after post-extraction socket healing and prosthetic restoration after implant healing. Implants of lengths ranging from 6-15 mm and widths of 3.6, 4.2, and 4.8 mm were used in this study. At the time of prosthesis delivery (T0), after two years (T1), and after five years (T2), plaque (PI) and bleeding (BoP) indices, probing depths (PPD), marginal bone levels (MBL), and PES/WES were evaluated for each implant. RESULTS: No patient dropped out of the study during the follow-up period. All thirty implants were clinically successful at five years post-prosthesis delivery (survival rate: 100%) and showed no signs of peri-implant infection. Peri-implant soft tissues were in good health (BoP at T2: 0% in 73% of patients; 25% in 13% of patients; 50% in 10% of patients; and 75% in 3% of patients). The mean PPD was 2.05±0.56 mm at T0, 1.992±0.6 mm at T1, and 1.867±0.439 mm at T2. The mean MBL at T0 was 0.413±0.440 mm, at T1 was 0.306±0.388 mm, and at T2 was 0.263±0.368 mm. The mean PES, WES, and PES/WES indices, 7.43±1.04, 7.57±0.82, and 15.00±1.17, respectively, indicate good integration of soft tissues, satisfactory aesthetics, and an overall positive outcome. CONCLUSIONS: The success rates, maintenance of marginal bone levels, and periodontal and aesthetic indices suggest the validity of implant-prosthetic rehabilitations with CAD/CAM abutments in cases of single crowns.

Lower Jaw Full-Arch Restoration: A Completely Digital Approach to Immediate Load.

The digital transformation has revolutionized various sectors, including dentistry. Dentistry has emerged as a pioneer in embracing digital technologies, leading to advancements in surgical and prosthetic oral healthcare. Immediate loading for full-arch edentulous dental implants, once debated, is now widely accepted. This case report describes a 74-year-old patient with dental mobility and significant bone loss who was rehabilitated using a Toronto Bridge protocol on four dental implants with immediate loading. Digital planning, surgical guides, 3D printing, and precision techniques were employed. The surgery involved implant placement and prosthetic procedures. The patient reported minimal post-operative discomfort, and after four months, the definitive prosthesis was successfully placed. This case demonstrates the efficacy of immediate loading in complex dental scenarios with digital innovation, resulting in improved patient outcomes. The full digital workflow, including 3D printing and the use of modern materials, enhances the efficiency and predictability of oral rehabilitation, marking a transformative era in dental care. The integration of digital technology in all phases of treatment, from diagnosis to finalization, makes this approach safer, reliable, and efficient, thereby benefiting both patients and clinicians.

Conometric Connection for Implant-Supported Crowns: A Prospective Clinical Cohort Study.

BACKGROUND: Traditional screw or cemented connections in dental implants present limitations, prompting the exploration of alternative methods. This study assesses the clinical outcomes of single crowns and fixed partial prostheses supported by conometric connections after one year of follow-up. METHODS: Twenty-two patients received 70 implants, supporting 33 rehabilitations. Biological responses and prosthodontic complications were evaluated at baseline, 6 months, and 12 months. RESULTS: All implants exhibited successful osseointegration, with no losses or peri-implant inflammation. Marginal bone levels showed minimal changes, well below pathological thresholds. The difference in marginal bone loss (MBL) was -0.27 ± 0.79 mm between T0 and T1, and -0.51 ± 0.93 mm between T0 and T2. No abutment screw loosening or crown chipping occurred. However, coupling stability loss was observed in nine cases. CONCLUSIONS: The conometric connection demonstrated successful integration and minimal complications after one year. This alternative shows promise, particularly in simplifying handling and improving marginal adaptation. Further research with larger sample sizes and longer follow-up is warranted for comprehensive validation.

Fully digital workflow for implant-supported fixed restorations consisting of a titanium primary structure and a zirconia secondary structure.

PURPOSE: To describe a fully digital workflow for an implant-supported fixed hybrid restoration that involves a double CAD/CAM structure and to highlight the benefits of this type of restoration. MATERIALS AND METHODS: Using a fully digital workflow, starting from intraoral scans, the necessary steps for producing the final hybrid prosthesis are described. The prosthesis consists of a titanium primary structure and a zirconia secondary structure that is cemented onto the primary structure in the laboratory. A clinical case is presented to illustrate the steps required for prosthetic rehabilitation. RESULTS: This technique enables the fabrication of clinically valid and passive prostheses using a fully digital workflow. CONCLUSION: In just three clinical sessions, a fully digital workflow makes it possible to produce robust implant-supported fixed hybrid prostheses, comprising a titanium primary structure and an outer secondary structure made of zirconia. This procedure can be applied to a wide range of cases from simple to extended, including full-arch restorations.

Full-Arch Guided Restoration and Bone Regeneration: A Complete Digital Workflow Case Report.

OBJECTIVE: complex rehabilitations present multiple difficulties, regarding both the planification of the surgery and the design of the prothesis. A digital approach can support the workflow, as well as the degree of intraoperative precision, and improve the long-term prognosis. METHODS: A surgical guide was designed for implant placement. An extensive regeneration of the upper jaw was performed with contextual implant insertion, and a delayed load rehabilitation was chosen. After four months, a second surgery and a simultaneous soft tissue augmentation was performed, and a 3D-printed temporary restoration was placed. After another two months, new dental and facial scans, smile design, and facial bite registrations were obtained. Upper and lower dentures were built using an exclusively digital workflow. Both metal substructures were passivated and cemented in one session; in the following appointment, the aesthetic and occlusal checks were carried out. During the third visit, both prostheses were delivered. RESULTS: Careful case planning and the surgical guide made it possible to achieve primary stability and acceptable emergence profiles in an extremely reabsorbed upper jaw. Leukocyte-Platelet Rich Fibrin (L-PRF) made the extensive bone regeneration more approachable and lowered the post-operative pain and swelling, while speeding up the soft tissue healing process. During the re-entry surgery, the volumes of soft tissues were increased to improve aesthetics, and the amount of keratinized gingiva around the six implants was also increased. Smile design and facial scans have provided the means to create acceptable aesthetics and function in a few sessions with minimal patient discomfort. CONCLUSIONS: Computer-assisted implantology is a safe and precise method of performing dental implant surgery. Preliminary studies have a high degree of accuracy, but further studies are needed to arrive at a fully digital clinical protocol at all stages.

Long-term results of autologous periosteum-derived micro-grafts with poly(lactic-go-glycolic acid) in sinus lift augmentation surgeries: A 7-years follow-up observational study.

INTRODUCTION AND IMPORTANCE: The study aimed to present the long-term results of autologous and homologous micrografts for bone regeneration aimed at positioning dental implants after sinus lift augmentation surgeries, by combining autologous Rigenera® micrografts with poly(lactic-go-glycolic acid). CASE PRESENTATION: A total of 5 patients (2 males and 3 females) from 36 to 71 years were involved in the observational study. All the patients showed a good health status system (ASA1 and 2), according to their clinical history with neither system diseases, nor under medication able to interfere with osseointegration. CLINICAL DISCUSSION: The radiographic evaluations, after the implant placement and during the continuous follow-up upto 7 years, were carried out through periapical endoral x-rays. The survival and implant success rate was 100 %. Histological analyses were performed after 3 and 7 months after the surgical procedure. CONCLUSION: No adverse events have been observed that can be traced back to the use of autologous micrografts with poly(lactic-go-glycolic acid), showing safety and predictable results even in long term.

Excess Mortality among Physicians and Dentists during COVID-19 in Italy: A Cross-Sectional Study Related to a High-Risk Territory.

BACKGROUND: Many studies previously reported epidemiological data on mortality due to COVID-19 among health workers. All these studies included a partial sample of the population with a substantial selection bias. The present study evaluates the trend of mortality among physicians and dentists operating in an area considered to be at high risk during the COVID-19 pandemic. METHODS: Data relating to all physicians and dentists registered in the province of Pavia (Italy), a sample consisting of 5454 doctors in 2020 was analyzed. The mortality rates obtained were compared with those related to the 5-year period preceding the pandemic and with those related to the general population. RESULTS: In the area considered, a mortality rate of 0.83% (+69% compared to 2015-2019) was observed in the entire sample in 2020 and 0.43% (-11% compared to 2015-2019) in 2021; among physicians, there was a mortality rate of 0.76% (+53% compared to 2015-2019) in 2020 and 0.35% (-29% compared to 2015-2019) in 2021; for dentists, there was a mortality rate of 1.27% (+185% compared to 2015-2019) in 2020 and 1.01% (+127% compared to 2015-2019) in 2021. CONCLUSIONS: These data report the global impact of the SARS-CoV-2 pandemic on physicians and dentists in a high-risk territory. In 2020, a significant increase in the mortality rate compared to the previous 5 years was observed for both physicians and dentists; in 2021, a significant increase in the mortality rate was observed only for dentists. These data are also significant in evaluating the impact of vaccination on physicians and dentists and indicate that dentists were among the professions most at risk during the pandemic.

Correlation between the Mandibular Lingula Position and Some Anatomical Landmarks in Cone Beam CT.

BACKGROUND: the position of the mandibular lingula (Li) affects the success rate of the inferior alveolar nerve block (IANB) and ramus osteotomies. This study evaluated the position of the Li, to investigate the anatomical relationship between the Li and some anatomical measurements using cone beam computed tomography (CBCT). METHODS: 201 hemimandibular CBCTs of 111 patients (43 males and 68 females; 18 to 88 years old) were retrospectively evaluated. The Li location was determined from the lingula tip to: the occlusal plane, the anterior and posterior borders of the mandibular ramus, the lower border of the mandible, the distal surface of the mandibular second molar, and the mandibular notch. We evaluated the correlations between the Li and the anteroposterior diameter of the mandibular ramus; the vertical distance between condyle and mandibular angle; the mesial-distal diameter of the first, second, and third mandibular molar, the intercanine distance, the intermolar distances among the first, second, and third mandibular molars; the distance between the intermolar line of the first molar and midline, and the length of the mandibular body. RESULTS: the vertical distance of the Li from the occlusal plane was 11.22 ± 4.27 mm. Some parameters significantly correlated with the anatomical measurements taken into consideration. CONCLUSIONS: the present study provides new information concerning the Li and mandibular anatomy in the Italian population. Moreover, by correlating some anatomic measurements to the Li position, the localization of the Li is made possible, indirectly through the measurement of some distances between anatomical landmarks.

Maxillary Sinus Lift Using Autologous Periosteal Micrografts: A New Regenerative Approach and a Case Report of a 3-Year Follow-Up.

This case report discusses about an innovative bone regeneration method that involves the use of autologous periosteal micrografts, which were used for a maxillary sinus floor lift in a 52-year-old female patient. This method allows for harvesting of a graft that is to be seeded on a PLGA scaffold and involves collection of a very little amount of palatal periosteal tissue in the same surgical site after elevation of a flap and disaggregation of it by using a Rigenera® filter. Histological samples collected at the time of implant installation demonstrate a good degree of bone regeneration. The clinical and radiographic outcomes at the 3-year follow-up visit showed an adequate stability of hard and soft tissues around the implants. This report demonstrates the possibility to obtain a sufficient quality and quantity of bone with a progenitor cell-based micrograft and in turn make the site appropriate for an implant-supported rehabilitation procedure, with stable results over a period of two years.

Long-Term Effects of Acute Myeloid Leukemia Treatment on the Oral System in a Pediatric Patient.

INTRODUCTION: Acute Myeloid Leukemia (AML) in pediatric patients is a serious disease, although, for the subgroup of patients who receive proper treatment, a long-term survival rate above 50% is typical. The cycles of chemo- and radiotherapy used to treat AML can impair dental development. CASE REPORT: Herein, we describe the oral condition of a 25-year-old male patient treated for AML with chemo- and radiotherapy from 5 to 7 years of age; his AML has remained in remission for the past 18 years. He had lost only one permanent tooth, but the remaining teeth demonstrated serious deformations and radicular hypoplasia. Two teeth required immediate extraction and subsequent replacement by implant-supported crowns. We found that the decayed, missing, filled teeth (DMFT) index was not representative of the real oral condition. Here, we report the full case and provide a brief review of the literature. CONCLUSION: Antitumor treatment of pediatric leukemia can induce total impairment of dental development and function. These adverse effects may become clinically evident many years after the resolution of cancer, and can be significantly detrimental to the patient's quality of life.