A repeatedly refuelable mediated biofuel cell based on a hierarchical porous carbon electrode.

Biofuel cells that generate electricity from renewable fuels, such as carbohydrates, must be reusable through repeated refuelling, should these devices be used in consumer electronics. We demonstrate the stable generation of electricity from a glucose-powered mediated biofuel cell through multiple refuelling cycles. This refuelability is achieved by immobilizing nicotinamide adenine dinucleotide (NAD), an electron-transfer mediator, and redox enzymes in high concentrations on porous carbon particles constituting an anode while maintaining their electrochemical and enzymatic activities after the immobilization. This bioanode can be refuelled continuously for more than 60 cycles at 1.5 mA cm(-2) without significant potential drop. Cells assembled with these bioanodes and bilirubin-oxidase-based biocathodes can be repeatedly used to power a portable music player at 1 mW cm(-3) through 10 refuelling cycles. This study suggests that the refuelability within consumer electronics should facilitate the development of long and repeated use of the mediated biofuel cells as well as of NAD-based biosensors, bioreactors, and clinical applications.

Hopping and band mobilities of pentacene, rubrene, and 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) from first principle calculations.

Hopping and band mobilities of holes in organic semiconductors at room temperature were estimated from first principle calculations. Relaxation times of charge carriers were evaluated using the acoustic deformation potential model. It is found that van der Waals interactions play an important role in determining accurate relaxation times. The hopping mobilities of pentacene, rubrene, and 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) in bulk single crystalline structures were found to be smaller than 4 cm(2)∕Vs, whereas the band mobilities were estimated between 36 and 58 cm(2)∕Vs, which are close to the maximum reported experimental values. This strongly suggests that band conductivity is dominant in these materials even at room temperature.

Bioelectrocatalytic oxidation of glucose with antibiotic channel-containing liposomes.

We developed an efficient bioelectrocatalytic system for glucose oxidation by introducing hydrophilic glucose-permeable antibiotic channels into liposomes.

Micro-coulometric study of bioelectrochemical reaction coupled with TCA cycle.

The mediated electro-enzymatic electrolysis systems based on the tricarboxylic acid (TCA) cycle reaction were examined on a micro-bulk electrolytic system. A series of the enzyme-catalyzed reactions in the TCA cycle was coupled with electrode reaction. Electrochemical oxidation of NADH was catalyzed by diaphorase with an aid of a redox mediator with a formal potential of -0.15 V vs. Ag|AgCl. The mediator was also able to shuttle electrons between succinate dehydrogenase and electrode. The charge during the electrolysis increased on each addition of dehydrogenase reaction in a cascade of the TCA cycle. However, the electrolysis efficiencies were close to or less than 90% because of the product inhibition. Lactate oxidation to acetyl-CoA catalyzed by two NAD-dependent dehydrogenases was coupled with the bioelectrochemical TCA cycle reaction to achieve the 12-electron oxidation of lactate to CO(2). The charge passed in the bioelectrocatalytic oxidation of 5 nmol of lactate was 4 mC, which corresponds to 70% of the electrolysis efficiency.

A liposome-based energy conversion system for accelerating the multi-enzyme reactions.

We report the first example of a liposome-based energy conversion system that is useful for entrapping enzymes and NAD coenzyme to accelerate multi-step enzymatic reactions. The liposome generates a much higher catalytic current compared with the non-liposome system, which is in good consistency with numerical simulations.

A mediator-adapted diaphorase variant for a glucose dehydrogenase-diaphorase biocatalytic system.

Biofuel cell is an energy conversion device of the next generation which enables use of safer and higher energy-density fuels such as glucose. We have been developing a biofuel cell that comprises the three enzymes: glucose dehydrogenase (GDH) and diaphorase (DI) on anode, and bilirubin oxidase (BOD) on cathode. In this work, we have developed a DI variant suitable for our biofuel cell by using directed molecular evolution method. A gene library of DI variants was constructed by using error-prone PCR and the variant proteins were expressed in an Escherichia coli system. 8000 isolated variants have been screened with activity against 2-amino-1,4-naphthoquinone (ANQ), and 10 of them have been qualified which were then purified and examined their activities against ANQ. A highest activity was observed in G122D variant of which glycine residue at position 122 is substituted to aspartate. Enzymatic kinetic analyses show that KM for ANQ in G122D is 1/3 of that in wild type (G122D: 356 µM, wild type: 1.08 mM), whereas kcat and KM for NADH is almost the same, clearly showing that G122D mutation has given DI an improvement in enzymatic activity at lower ANQ concentration. The effect of this mutation was considered electrochemically in solution and in immobilized layer. The results show that G122D variant DI gave a higher current at lower ANQ concentration in solution, as well as in immobilized condition where GDH is co-immobilized within.

Mechanism of intramolecular electron transfer in the photoexcited Zn-substituted cytochrome c: theoretical and experimental perspective.

Photoinduced electron transfer (ET) in zinc-substituted cytochrome c (Zn-cyt c) has been utilized in many studies on the long-range ET in protein. Attempting to understand its ET mechanism in terms of electronic structure of the molecule, we have calculated an all-electron wave function for the ground-state of Zn-cyt c on the basis of density functional theory (DFT). The four molecular orbitals (MOs) responsible for excitation by UV-vis light (Gouterman's 4-orbitals) are assigned on the basis of the excited states of chromophore model for Zn-porphine complex calculated with the time-dependent DFT method. ET rates between each Gouterman's 4-orbitals and other MOs were estimated using Fermi's golden rule. It appeared that the two occupied MOs of the 4-orbitals show exclusively higher ET rate from/to particular MOs that localize on outermost amino acid residues (Lys 7 or Asn 54), respectively, whereas ET rates involving the two unoccupied MOs of the 4-orbitals are much slower. These results imply that the intramolecular ET in photoexcited Zn-cyt c is governed by the hole transfer through occupied MOs. The couplings of MOs between zinc porphyrin core and specific amino acid residues on the protein surface have been demonstrated in Zn-cyt c immobilized on an Au electrode via carboxylic acid group-terminated self-assembled monolayer. The Zn-cyt c-modified electrode showed photocurrents responsible for photoillumination. The action spectrum of the photocurrent was identical with the absorption spectrum of Zn-cyt c, indicating photoinduced electron conduction via occupied MOs. The voltage dependence of the photocurrent appeared to be linear and bidirectional like a photoconductor, which strongly supports the intramolecular ET mechanism in Zn-cyt c proposed on the basis of the theoretical calculations.

Design of metal cofactors activated by a protein-protein electron transfer system.

Protein-to-protein electron transfer (ET) is a critical process in biological chemistry for which fundamental understanding is expected to provide a wealth of applications in biotechnology. Investigations of protein-protein ET systems in reductive activation of artificial cofactors introduced into proteins remains particularly challenging because of the complexity of interactions between the cofactor and the system contributing to ET. In this work, we construct an artificial protein-protein ET system, using heme oxygenase (HO), which is known to catalyze the conversion of heme to biliverdin. HO uses electrons provided from NADPH/cytochrome P450 reductase (CPR) through protein-protein complex formation during the enzymatic reaction. We report that a Fe(III)(Schiff-base), in the place of the active-site heme prosthetic group of HO, can be reduced by NADPH/CPR. The crystal structure of the Fe(10-CH(2)CH(2)COOH-Schiff-base).HO composite indicates the presence of a hydrogen bond between the propionic acid carboxyl group and Arg-177 of HO. Furthermore, the ET rate from NADPH/CPR to the composite is 3.5-fold faster than that of Fe(Schiff-base).HO, although the redox potential of Fe(10-CH(2)CH(2)COOH-Schiff-base).HO (-79 mV vs. NHE) is lower than that of Fe(Schiff-base).HO (+15 mV vs. NHE), where NHE is normal hydrogen electrode. This work describes a synthetic metal complex activated by means of a protein-protein ET system, which has not previously been reported. Moreover, the result suggests the importance of the hydrogen bond for the ET reaction of HO. Our Fe(Schiff-base).HO composite model system may provide insights with regard to design of ET biosystems for sensors, catalysts, and electronics devices.