Does maintaining the number of present and functional teeth benefit the longevity of life in older people requiring nursing care?: A prospective cohort study.

PURPOSE: This prospective cohort study examined the effects of the number of present and functional teeth on mortality among older Japanese adults requiring nursing care in an environment of comprehensive oral hygiene and nutritional management. METHODS: The study included 174 older adults (mean age: 84.4 ± 8.3 years; male/female: 49/125) in need of support or long-term care, who resided in either a local specialized healthcare facility or their own homes, and received daily oral hygiene and nutritional support at facilities in Okayama, Japan. The initial clinical oral examination along with assessment of general physical condition and nursing environment of the participants were performed in July 2013 and followed up for one year. RESULTS: All-cause mortality occurred in 28 (mean age: 88.7 ±13.4 years; male/female: 6 /22) individuals during the follow-up period. Cox proportional hazard analysis indicated that older age, low performance in activities of daily living (Barthel Index <40), and underweight status (body mass index <18.5) were significant risk factors for mortality. The number of present and functional teeth were not found to be significant risk factors for mortality. CONCLUSIONS: During the one-year follow-up period, the number of present and functional teeth did not have a significant impact on mortality among older Japanese adults requiring nursing care in a well-managed environment of oral hygiene and nutritional status.

Tooth morphology fusion technique is more accurate than conventional technique in transferring morphology of provisional to definitive screw-retained, implant-supported crown: A preliminary intervention study.

PURPOSE: To compare the accuracy of the tooth morphology fusion (TMF) digital technique and customized impression transfer coping (conventional) technique when transferring the morphology of a provisional crown to a definitive screw-retained implant-supported crown. METHODS: Six cases of partial edentulism (one anterior and five posterior) treated with oral implant placement in our clinic for the loss of three or fewer teeth in the maxilla or mandible between April 2017 and September 2018 were included. After implant placement and re-entry surgery, provisional restorations were made and adjusted to obtain the ideal morphology. Two definitive restorations were constructed by transferring the complete morphology of the provisional restorations, including the subgingival contour, using the TMF digital and conventional techniques. Three sets of surface morphological data were obtained using a desktop scanner. The three-dimensional total discrepancy volume (TDV) between the provisional restoration (reference) and the two definitive restorations was digitally measured by overlapping the surface data of the stone cast using the Boolean operation. Each TDV ratio (%) was calculated by dividing the TDV by the volume of provisional restoration. The median TDV ratios for TMF and conventional techniques were compared using the Wilcoxon signed-rank test. RESULTS: The median TDV ratio between provisional and definitive restorations constructed using the TMF digital technique (8.05%) was significantly lower than that obtained using the conventional technique (13.56%, P < 0.05). CONCLUSIONS: In this preliminary intervention study, the TMF digital technique was more accurate than the conventional technique for the transfer of morphology from provisional to definitive prosthesis.

Accuracy of a novel modified single computed tomography scanning method for assisting dental implant placement: a retrospective observational study.

PURPOSE: The aim of this study is to compare dental implant placement accuracy of three surgical guide fabrication methods: single (SCT) and double computed tomography (DCT), and a newly developed modified SCT (MSCT) scan method. METHODS: A total of 183 cases (183 surgical guides, and 485 implants) of static-guide-assisted implant placement surgery using the SCT, DCT, or MSCT methods in a dental clinic were included in the study. Three-dimensional (3D) deviations (mm) at the entry and tip of the implant body between preoperative simulation and actual placement were measured as surrogate endpoints of implant placement accuracy. The following survey details were collected from medical records and CT data: sex, age at implant placement surgery, surgical guide fabrication method, number of remaining teeth, implant length, implant location, alveolar bone quality, and bone surface inclination at implant placement site in preoperative simulation, etc. Risk factors for reducing implant placement accuracy were investigated using generalized estimating equations. RESULTS: The SCT and DCT methods (odds ratios [ORs] vs. MSCT method: 1.438, 1.178, respectively), posterior location (OR: 1.114), bone surface buccolingual inclination (OR: 0.997), and age at implant placement surgery (OR: 0.995) were significant risk factors for larger 3D deviation at the entry; the SCT (OR: 1.361) and DCT methods (OR: 1.418), posterior location (OR: 1.190), implant length (OR: 1.051), and age at implant placement surgery (OR: 0.995) were significant risk factors for larger 3D deviation at the tip of the implant body. CONCLUSIONS: Implant placement accuracy was better using the MSCT method compared to the SCT and DCT methods.

Rating criteria to evaluate student performance in digital wax-up training using multi-purpose software.

PURPOSE: The aim of this study was to introduce rating criteria to evaluate student performance in a newly developed, digital wax-up preclinical program for computer-aided design (CAD) of full-coverage crowns and preliminarily investigate the reliability and internal consistency of the rating system. MATERIALS AND METHODS: This study, conducted in 2017, enrolled 47 fifth-year dental students of Okayama University Dental School. Digital wax-up training included a fundamental practice using computer graphics (CG), multipurpose CAD software programs, and an advanced practice to execute a digital wax-up of the right mandibular second molar (#47). Each student's digital wax-up work (stereolithography data) was evaluated by two instructors using seven qualitative criteria. The total qualitative score (0-90) of the criteria was calculated. The total volumetric discrepancy between each student's digital wax-up work and a reference prepared by an instructor was automatically measured by the CAD software. The inter-rater reliability of each criterion was analyzed using a weighted kappa index. The relationship between the total volume discrepancy and the total qualitative score was analyzed using Spearman's correlation. RESULTS: The weighted kappa values for the seven qualitative criteria ranged from 0.62 - 0.93. The total qualitative score and the total volumetric discrepancy were negatively correlated (ρ = -0.27, P = .09, respectively); however, this was not statistically significant. CONCLUSION: The established qualitative criteria to evaluate students' work showed sufficiently high inter-rater reliability; however, the digitally measured volumetric discrepancy could not sufficiently predict the total qualitative score.

Fixed Partial Denture Designed by Combining the Whole 3D Digital Surface Morphology of the Provisional Restoration and Abutment Teeth Surfaces.

We introduce a new digital workflow to fabricate a fixed partial denture (FPD) utilizing the three-dimensional surface morphology of provisional restoration (PR) and abutment teeth. Scanned images of the full maxilla with abutment teeth, full maxilla with PR, and PR alone were superimposed. The surfaces of the final FPD were designed based on the entire morphology of the PR and abutment teeth surfaces. The inner and outer surfaces converged at the margin lines of the abutment teeth. Fine modifications to the final FPD design were performed manually, and the final FPD was fabricated and successfully installed in the patient.

Risk factors for root caries annual incidence and progression among older people requiring nursing care: A one-year prospective cohort study.

PURPOSE: We aimed to determine root caries annual incidence (RCAI) and root caries annual progression (RCAP) and risk factors for them among older people requiring nursing care. METHODS: The target population comprised 186 dentate individuals aged ≥ 65 years who required nursing care while living in nursing homes (NHs) or their own homes (OHs) in Okayama, Japan. Survey items included presence/absence and severity of root caries, age, sex, living environment (NH or OH), the Clinical Dementia Rating, and the Barthel Index (BI). Baseline surveys were conducted from 2015 to 2017; subjects were followed up for one year. RCAI and RCAP per tooth and per person were calculated, and risk factors for them were identified using generalized estimating equations. RESULTS: In total, 104 individuals (mean age: 82.0 ± 12.4 years) completed the follow-up survey. RCAIs per tooth and per person were 14.6% (173/1188) and 59.6% (62/104), respectively. RCAP per tooth was 22.5% (51/227 teeth with root caries at baseline). Significant risk factors for RCAI were living environment (OH, odds ratio [OR]: 2.14), sex (male, OR: 1.84), clasped tooth (OR: 1.82), and older age (OR: 1.05) at baseline. Significant risk factors for RCAP were sex (male, OR: 5.20), regular dental checkup (OR: 2.74), and high BI score (OR: 1.02) at baseline. CONCLUSION: At one-year follow-up, 59.6% of the subjects developed at least one root caries. Risk factors for RCAI were living environment (OH), male, clasped tooth, and older age, whereas those for RCAP were male, regular dental checkup, and high BI score.

Newly developed data-matching methodology for oral implant surgery allowing the automatic deletion of metal artifacts in 3D-CT images using new reference markers: A case report.

PATIENTS: The patient was a 55-year-old woman with left upper molar free-end edentulism and 9 full cast metal crowns in her mouth. Three three-dimensional (3D) images were superimposed: a computed tomography (CT) image with the patient wearing the CT-matching template (CTMT) with six glass ceramic markers, which hardly generate any artifacts, on the template surface, and oral plaster model surfaces with and without CTMTs. Metal artifacts were automatically removed by a Boolean operation identifying unrealistic images outside the oral plaster model surface. After the preoperative simulation, fully guided oral implant surgery was performed. Two implant bodies were placed in the left upper edentulism. The placement errors calculated by comparing the preoperative simulation and actual implant placement were then assessed by a software program using the 3D-CT bone morphology as a reference. The 3D deviations between the preoperative simulation and actual placement at the entry of the implant body were a maximum 0.48 mm and minimum 0.26 mm. Those at the tip of the implant body were a maximum 0.56 mm and a minimum 0.25 mm. DISCUSSION: In this case, the maximum 3D deviations at the entry and tip section were less than in previous studies using double CT. CONCLUSIONS: Accurate image fusion utilizing CTMT with new reference markers was possible for a patient with many metal restorations. Using a surgical guide manufactured by the new matching methodology (modified single CT scan method), implant placement deviation can be minimized in patients with many metal restorations.