Characteristics and management of municipal solid waste in Uyo, Akwa Ibom state, Nigeria.

Increased urbanization and population lead to increased consumption of manufactured goods. This ultimately results in increased production of waste. Identifying its composition is crucial for planning an effective solid waste management strategy. This study assesses the characteristics and composition of the waste generated within the Uyo Capital City Development Area of Akwa Ibom State, Nigeria. This is to aid in developing a scientifically supported waste management pilot system for the state. Direct waste sorting and characterization were conducted on the municipal solid waste arriving at the landfill during the study period. Over 50% of the generated wastes are recyclables and composed of plastics, metals, and paper, while the fraction of organic waste is over 30%. Similarly, the waste generation per capita is 1.34 kg/person/day, while the generation forecast over the next ten years is estimated to increase by approximately 40%. Furthermore, over 9,000 surveys were completed by residents to establish a problem statement about the existing waste collection and disposal system, and possible solutions. Importantly, a majority of survey respondents were willing to source-separate their wastes and supported paying a fee for adequate waste collection. This strongly indicates that an integrated waste management system could be established to generate value from the collected waste. Supplementary revenue can be generated through composting, recycling, and land reclamation.

Experimental investigation of products from thermal treatment of real-world mixed single-use and multi-layered waste plastics.

The usage and disposal of highly abundant single-use and multilayered plastics contribute to significant ecological problems. The thermochemical recovery of these plastics to useful products and chemicals provides opportunity for positive economic and environmental impacts. Most previous research use idealised and unrepresentative feedstocks. To address this, various mixed waste plastics collected from the rejected fraction of a municipal waste recovery facility in Ghana were pyrolyzed at varying temperatures of 450, 500 and 550 °C and their yields compared. The obtained chemical products were analysed using several different techniques. Energy and carbon balances of the processes were produced using the CHNS and energy content of the oil fraction and the compositional results of the pyrolysis gas fraction, the latter of which was measured by Gas Chromatography Thermal Conductivity Detection (GC-TCD). The oils were further assessed via Gas Chromatography Mass Spectrometry (GC-MS) to identify the available valuable compounds. The formed oil contained approximately 40% light hydrocarbons (C6 - C11), 18% middle hydrocarbons (C11 - C16) and 42% heavy hydrocarbon compounds (C16+). The optimal oil yield of 65.9 ± 0.5% and low heating value of 44.7 ± 0.1 MJ/kg for single-use plastics were recorded at highest heating temperatures of 550 and 500 °C, respectively. The findings provide indication that pyrolysis is a fitting solution for energy recovery from waste plastics.