Nanodiamond Influence on the Nucleation and Growth of YBCO Superconducting Film Deposited by Metal-Organic Decomposition.

It was recently shown that the introduction of nanodiamond (ND) into a superconducting metal-organic deposited YBa2Cu3O7-δ (YBCO) film produces an increase in critical current density in self-field conditions (B = 0 T). Such improvement appears to be due to the formation of denser and smoother films than the samples deposited without ND. This paper presents the work done to understand the role of ND during YBCO nucleation and growth. A detailed study on YBCO+ND films quenched at different temperatures of the crystallization process was carried out. Results showed that the reaction responsible for YBCO production appeared effectively affected by ND. In particular, ND stabilizes one of the YBCO precursors, BaF2(1-x)Ox, whose conversion into YBCO requires a prolonged time. Therefore, the YBCO nucleation is slowed down by ND and begins when the experimental conditions favor both thermodynamically and kinetically the formation of YBCO along the c-axis. This effect has important implications because the growth of a highly epitaxial c-axis YBCO film enables excellent superconducting performance.

Etching Kinetics of Nanodiamond Seeds in the Early Stages of CVD Diamond Growth.

We present an experimental study on the etching of detonation nanodiamond (DND) seeds during typical microwave chemical vapor deposition (MWCVD) conditions leading to ultra-thin diamond film formation, which is fundamental for many technological applications. The temporal evolution of the surface density of seeds on the Si(100) substrate has been assessed by scanning electron microscopy (SEM). The resulting kinetics have been explained in the framework of a model based on the effect of the particle size, according to the Young-Laplace equation, on both chemical potential of carbon atoms in DND and activation energy of the reaction with atomic hydrogen. The model describes the experimental kinetics of seeds' disappearance by assuming that nanodiamond particles with a size smaller than a "critical radius," r*, are etched away while those greater than r* can grow. Finally, the model allows to estimate the rate coefficients for growth and etching from the experimental kinetics.

Adsorption and Dissociation of R-Methyl p-Tolyl Sulfoxide on Au(111).

Sulfur-based molecules producing self-assembled monolayers on gold surfaces have long since become relevant functional molecular materials with many applications in biosensing, electronics, and nanotechnology. Among the various sulfur-containing molecules, the possibility to anchor a chiral sulfoxide to a metal surface has been scarcely investigated, despite this class of molecules being of great importance as ligands and catalysts. In this work, (R)-(+)-methyl p-tolyl sulfoxide was deposited on Au(111) and investigated by means of photoelectron spectroscopy and density functional theory calculations. The interaction with Au(111) leads to a partial dissociation of the adsorbate due to S-CH3 bond cleavage. The observed kinetics support the hypotheses that (R)-(+)-methyl p-tolyl sulfoxide adsorbs on Au(111) in two different adsorption arrangements endowed with different adsorption and reaction activation energies. The kinetic parameters related to the adsorption/desorption and reaction of the molecule on the Au(111) surface have been estimated.

High quality epitaxial graphene on 4H-SiC by face-to-face growth in ultra-high vacuum.

Epitaxial graphene on SiC is the most promising substrate for the next generation 2D electronics, due to the possibility to fabricate 2D heterostructures directly on it, opening the door to the use of all technological processes developed for silicon electronics. To obtain a suitable material for large scale applications, it is essential to achieve perfect control of size, quality, growth rate and thickness. Here we show that this control on epitaxial graphene can be achieved by exploiting the face-to-face annealing of SiC in ultra-high vacuum. With this method, Si atoms trapped in the narrow space between two SiC wafers at high temperatures contribute to the reduction of the Si sublimation rate, allowing to achieve smooth and virtually defect free single graphene layers. We analyse the products obtained on both on-axis and off-axis 4H-SiC substrates in a wide range of temperatures (1300 °C-1500 °C), determining the growth law with the help of x-ray photoelectron spectroscopy (XPS). Our epitaxial graphene on SiC has terrace widths up to 10µm (on-axis) and 500 nm (off-axis) as demonstrated by atomic force microscopy and scanning tunnelling microscopy, while XPS and Raman spectroscopy confirm high purity and crystalline quality.

Formation of a two-dimensional oxide via oxidation of a layered material.

We investigate the oxidation mechanism of the layered model system GeAs. In situ X-ray photoelectron spectroscopy experiments performed by irradiating an individual flake with synchrotron radiation in the presence of oxygen show that while As leaves the GeAs surface upon oxidation, a Ge-rich ultrathin oxide film is being formed in the topmost layer of the flake. We develop a theoretical model that supports the layer-by-layer oxidation of GeAs, with a logarithmic kinetics. Finally, assuming that the activation energy for the oxidation process changes linearly with coverage, we estimate that the activation energy for As oxidation is almost twice that for Ge at room temperature.

Identification of Topotactic Surface-Confined Ullmann-Polymerization.

On-surface Ullmann coupling is an established method for the synthesis of 1D and 2D organic structures. A key limitation to obtaining ordered polymers is the uncertainty in the final structure for coupling via random diffusion of reactants over the substrate, which leads to polymorphism and defects. Here, a topotactic polymerization on Cu(110) in a series of differently-halogenated para-phenylenes is identified, where the self-assembled organometallic (OM) reactants of diiodobenzene couple directly into a single, deterministic product, whereas the other precursors follow a diffusion driven reaction. The topotactic mechanism is the result of the structure of the iodine on Cu(110), which controls the orientation of the OM reactants and intermediates to be the same as the final polymer chains. Temperature-programmed X-ray photoelectron spectroscopy and kinetic modeling reflect the differences in the polymerization regimes, and the effects of the OM chain alignments and halogens are disentangled by Nudged Elastic Band calculations. It is found that the repulsion or attraction between chains and halogens drive the polymerization to be either diffusive or topotactic. These results provide detailed insights into on-surface reaction mechanisms and prove the possibility of harnessing topotactic reactions in surface-confined Ullmann polymerization.

Single-Crystal Pt-Decorated WO3 Ultrathin Films: A Platform for Sub-ppm Hydrogen Sensing at Room Temperature.

Hydrogen-related technologies are rapidly developing, driven by the necessity of efficient and high-density energy storage. This poses new challenges to the detection of dangerous gases, in particular the realization of cheap, sensitive, and fast hydrogen sensors. Several materials are being studied for this application, but most present critical bottlenecks, such as high operational temperature, low sensitivity, slow response time, and/or complex fabrication procedures. Here, we demonstrate that WO3 in the form of single-crystal, ultrathin films with a Pt catalyst allows high-performance sensing of H2 gas at room temperature. Thanks to the high electrical resistance in the pristine state, this material is able to detect hydrogen concentrations down to 1 ppm near room temperature. Moreover, the high surface-to-volume ratio of WO3 ultrathin films determines fast sensor response and recovery, with characteristic times as low as 1 s when the concentration exceeds 100 ppm. By modeling the hydrogen (de)intercalation dynamics with a kinetic model, we extract the energy barriers of the relevant processes and relate the doping mechanism to the formation of oxygen vacancies. Our results reveal the potential of single-crystal WO3 ultrathin films toward the development of sub-ppm hydrogen detectors working at room temperature.

Mechanistic Picture and Kinetic Analysis of Surface-Confined Ullmann Polymerization.

Surface-confined polymerization via Ullmann coupling is a promising route to create one- and two-dimensional covalent π-conjugated structures, including the bottom-up growth of graphene nanoribbons. Understanding the mechanism of the Ullmann reaction is necessary to provide a platform for rationally controlling the formation of these materials. We use fast X-ray photoelectron spectroscopy (XPS) in kinetic measurements of epitaxial surface polymerization of 1,4-dibromobenzene on Cu(110) and devise a kinetic model based on mean field rate equations, involving a transient state. This state is observed in the energy landscapes calculated by nudged elastic band (NEB) within density functional theory (DFT), which assumes as initial and final geometries of the organometallic and polymeric structures those observed by scanning tunneling microscopy (STM). The kinetic model accounts for all the salient features observed in the experimental curves extracted from the fast-XPS measurements and enables an enhanced understanding of the polymerization process, which is found to follow a nucleation-and-growth behavior preceded by the formation of a transient state.

Hydrogen Adsorption Properties of Carbon Nanotubes and Platinum Nanoparticles from a New Ammonium-Ethylimidazolium Chloroplatinate Salt.

Self-supporting membranes built entirely of carbon nanotubes have been prepared by wet methods and characterized by Raman spectroscopy. The membranes are used as supports for the electrodeposition of Pt nanoparticles without the use of additional additives and/or stabilizers. The Pt precursor is an ad hoc synthesized ammonium-ethylimidazolium chloroplatinate(IV) salt, [NH3 (CH2 )2 MIM)][PtCl6 ]. The Pt complex was characterized using NMR spectroscopy, XRD, ESI-MS, and FTIR spectroscopy. The interaction between the Pt-carbon nanotubes nanocomposites and hydrogen is analyzed using electrochemical and quartz microbalance measurements under near-ambient conditions. The contribution of the Pt phase to the hydrogen adsorption on nanotube is found and explained by a kinetic model that takes into account a spillover event. Such a phenomenon may be exploited conveniently for catalysis and electrocatalysis applications in which the hybrid systems could act as a hydrogen transfer agent in specific hydrogenation reactions.

Comparative study of approaches based on the differential critical region and correlation functions in modeling phase-transformation kinetics.

The statistical methods exploiting the "Correlation-Functions" or the "Differential-Critical-Region" are both suitable for describing phase transformation kinetics ruled by nucleation and growth. We present a critical analysis of these two approaches, with particular emphasis to transformations ruled by diffusional growth which cannot be described by the Kolmogorov-Johnson-Mehl-Avrami (KJMA) theory. In order to bridge the gap between these two methods, the conditional probability functions entering the "Differential-Critical-Region" approach are determined in terms of correlation functions. The formulation of these probabilities by means of cluster expansion is also derived, which improves the accuracy of the computation. The model is applied to 2D and 3D parabolic growths occurring at constant value of either actual or phantom-included nucleation rates. Computer simulations have been employed for corroborating the theoretical modeling. The contribution to the kinetics of phantom overgrowth is estimated and it is found to be of a few percent in the case of constant value of the actual nucleation rate. It is shown that for a parabolic growth law both approaches do not provide a closed-form solution of the kinetics. In this respect, the two methods are equivalent and the longstanding overgrowth phenomenon, which limits the KJMA theory, does not admit an exact analytical solution.

High temperature stability of onion-like carbon vs highly oriented pyrolytic graphite.

The thermodynamic stability of onion-like carbon (OLC) nanostructures with respect to highly oriented pyrolytic graphite (HOPG) was determined in the interval 765-1030 K by the electromotive force (emf) measurements of solid electrolyte galvanic cell: (Low) Pt|Cr3C2,CrF2,OLC|CaF2s.c.|Cr3C2,CrF2,HOPG|Pt (High). The free energy change of transformation HOPG = OLC was found positive below 920.6 K crossing the zero value at this temperature. Its trend with temperature was well described by a 3rd degree polynomial. The unexpected too high values of [Formula: see text] jointly to the HR-TEM, STEM and EELS evidences that showed OLC completely embedded in rigid cages made of a Cr3C2/CrF2 matrix, suggested that carbon in the electrodes experienced different internal pressures. This was confirmed by the evaluation under constant volume of [dP/dT by the α/κ ratio for OLC (0.5 MPa K(-1)) and HOPG (8 Pa K(-1)) where α and κ are the isobaric thermal expansion and isothermal compressibility coefficients, respectively. The temperature dependency of the pressure was derived and utilized to calculate the enthalpy and entropy changes as function of temperature and pressure. The highest value of the internal pressure experienced by OLC was calculated to be about 7 GPa at the highest temperature. At 920.6 K, ΔrH and ΔrS values are 95.8 kJ mol(-1) and 104.1 JK(-1) mol(-1), respectively. The surface contributions to the energetic of the system were evaluated and they were found negligible compared with the bulk terms. As a consequence of the high internal pressure, the values of the enthalpy and entropy changes were mainly attributed to the formation of carbon defects in OLC considered as multishell fullerenes. The change of the carbon defect fraction is reported as a function of temperature.

Stochastic transformation of points in polygons according to the Voronoi tessellation: microstructural description.

Starting from a stochastic two-dimensional process we studied the transformation of points in disks and squares following a protocol according to which at any step the island size increases proportionally to the corresponding Voronoi tessera. Two interaction mechanisms among islands have been dealt with: coalescence and impingement. We studied the evolution of the island density and of the island size distribution functions, in dependence on island collision mechanisms for both Poissonian and correlated spatial distributions of points. The island size distribution functions have been found to be invariant with the fraction of transformed phase for a given stochastic process. The n(Θ) curve describing the island decay has been found to be independent of the shape (apart from high correlation degrees) and interaction mechanism.