Unusually high thermal conductivity in suspended monolayer MoSi2N4.

Two-dimensional semiconductors with high thermal conductivity and charge carrier mobility are of great importance for next-generation electronic and optoelectronic devices. However, constrained by the long-held Slack's criteria, the reported two-dimensional semiconductors such as monolayers of MoS2, WS2, MoSe2, WSe2 and black phosphorus suffer from much lower thermal conductivity than silicon (~142 W·m-1·K-1) because of the complex crystal structure, large average atomic mass and relatively weak chemical bonds. Despite the more complex crystal structure, the recently emerging monolayer MoSi2N4 semiconductor has been predicted to have high thermal conductivity and charge carrier mobility simultaneously. In this work, using a noncontact optothermal Raman technique, we experimentally measure a high thermal conductivity of ~173 W·m-1·K-1 at room temperature for suspended monolayer MoSi2N4 grown by chemical vapor deposition. First-principles calculations reveal that such unusually high thermal conductivity benefits from the high Debye temperature and small Grüneisen parameter of MoSi2N4, both of which are strongly dependent on the high Young's modulus induced by the outmost Si-N bilayers. Our study not only establishes monolayer MoSi2N4 as a benchmark 2D semiconductor for next-generation electronic and optoelectronic devices, but also provides an insight into the design of 2D materials for efficient heat conduction.

Growing Nanocrystalline Graphene on Aggregates for Conductive and Strong Smart Cement Composites.

Highly conductive concrete/mortar has been long pursued to realize structural health monitoring in the development of smart-cement-based facilities. However, it remains challenging to significantly increase the electrical conductivity of concrete/mortar without lowering the compressive strength and flowability. Here, nanocrystalline-graphene-coated aggregates (termed Gr@AGs) are synthesized to break this conductivity-strength tradeoff. Admixing Gr@AGs with cement enables the construction of a conductive network of graphene that simultaneously strengthens the interfacial transition zone between aggregates and paste. As a result, high conductivity and improved mechanical properties have been simultaneously realized in Gr@AGs-based smart mortars. The significant positive effects of Gr@AGs are further enhanced by combining them with a low percentage of carbon fiber. Typically, the 28-day compressive/flexural strength of the optimized mortar increases by 12.2%/19.4%, with the electrical resistivity reduced by over 3 orders of magnitude from ∼4.6 × 105 to 182 Ω cm. On this basis, we demonstrate high-sensitivity cement-based piezoresistive sensors with a fractional change in resistivity as high as ∼25%, which is more than 1 order of magnitude higher than those reported in comparable systems. This study provides a solution to the critical issues in developing smart cementitious composites by taking full advantage of graphene's properties.