Spin coating epitaxial heterodimensional tin perovskites for light-emitting diodes.

Environmentally friendly tin (Sn) perovskites have received considerable attention due to their great potential for replacing their toxic lead counterparts in applications of photovoltaics and light-emitting diodes (LEDs). However, the device performance of Sn perovskites lags far behind that of lead perovskites, and the highest reported external quantum efficiencies of near-infrared Sn perovskite LEDs are below 10%. The poor performance stems mainly from the numerous defects within Sn perovskite crystallites and grain boundaries, leading to serious non-radiative recombination. Various epitaxy methods have been introduced to obtain high-quality perovskites, although their sophisticated processes limit the scalable fabrication of functional devices. Here we demonstrate that epitaxial heterodimensional Sn perovskite films can be fabricated using a spin-coating process, and efficient LEDs with an external quantum efficiency of 11.6% can be achieved based on these films. The film is composed of a two-dimensional perovskite layer and a three-dimensional perovskite layer, which is highly ordered and has a well-defined interface with minimal interfacial areas between the different dimensional perovskites. This unique nanostructure is formed through direct spin coating of the perovskite precursor solution with tryptophan and SnF2 additives onto indium tin oxide glass. We believe that our approach will provide new opportunities for further developing high-performance optoelectronic devices based on heterodimensional perovskites.

In Situ Halide Exchange of Cesium Lead Halide Perovskites for Blue Light-Emitting Diodes.

3D perovskites are promising to achieve efficient and bright deep-blue light-emitting diodes (LEDs), which are required for lighting and display applications. However, the efficiency of deep-blue 3D perovskite-based LEDs is limited by high density of defects in perovskites, and their deep-blue emission is not easy to achieve due to the halide phase separation and low solubility of chloride in precursor solutions. Here, an in situ halide exchange method is developed to achieve deep-blue 3D perovskites by spin-coating an organic halide salts solution to treat blue 3D perovskites. It is revealed that the halide-exchange process is mainly determined by halide ion diffusion targeting a concentration equalization, which leads to homogeneous 3D mixed-halide perovskites. By further introducing multifunctional organic ammonium halide salts into the exchange solution to passivate defects, high-quality deep-blue perovskites with reduced trap density can be obtained. This approach leads to efficient deep-blue perovskite LEDs with a peak external quantum efficiency (EQE) of 4.6% and a luminance of 1680 cd m-2 , which show color coordinates of (0.131, 0.055), very close to the Rec. 2020 blue standard. Moreover, the halide exchange method is bidirectional, and blue perovskite LEDs can be achieved with color coordinates of (0.095, 0.160), exhibiting a high EQE of 11.3%.

Retina-Inspired Self-Powered Artificial Optoelectronic Synapses with Selective Detection in Organic Asymmetric Heterojunctions.

The retina, the most crucial unit of the human visual perception system, combines sensing with wavelength selectivity and signal preprocessing. Incorporating energy conversion into these superior neurobiological features to generate core visual signals directly from incoming light under various conditions is essential for artificial optoelectronic synapses to emulate biological processing in the real retina. Herein, self-powered optoelectronic synapses that can selectively detect and preprocess the ultraviolet (UV) light are presented, which benefit from high-quality organic asymmetric heterojunctions with ultrathin molecular semiconducting crystalline films, intrinsic heterogeneous interfaces, and typical photovoltaic properties. These devices exhibit diverse synaptic behaviors, such as excitatory postsynaptic current, paired-pulse facilitation, and high-pass filtering characteristics, which successfully reproduce the unique connectivity among sensory neurons. These zero-power optical-sensing synaptic operations further facilitate a demonstration of image sharpening. Additionally, the charge transfer at the heterojunction interface can be modulated by tuning the gate voltage to achieve multispectral sensing ranging from the UV to near-infrared region. Therefore, this work sheds new light on more advanced retinomorphic visual systems in the post-Moore era.

In Situ-Fabricated Perovskite Nanocrystals for Deep-Blue Light-Emitting Diodes.

Efficient and stable deep-blue emission from perovskite light-emitting diodes (LEDs) is required for their application in lighting and displays. However, this is difficult to achieve due to the phase segregation issue of mixed halide perovskites and the challenge of synthesizing high-quality single-halide deep-blue perovskite nanocrystals through a traditional method. Here, we show that an antisolvent treatment can facilitate the in situ formation of perovskite nanocrystals using a facile spin-coating method. We find that the dropping time of the antisolvent can significantly affect the constitution of nanocrystal perovskite films. With a delay in the start time of the antisolvent treatment, small single-halide perovskite nanocrystals can be achieved, exhibiting efficient deep-blue emission. The LED device shows a stable electroluminescence (EL) peak at 465 nm, with a peak external quantum efficiency and a peak current efficiency of 2.4% and 2.5 cd A-1, respectively. This work provides a facile approach to changing the size of perovskite nanocrystals, thus effectively tuning their EL emission spectra.

Halide Homogenization for High-Performance Blue Perovskite Electroluminescence.

Metal halide perovskite light-emitting diodes (LEDs) have achieved great progress in recent years. However, bright and spectrally stable blue perovskite LED remains a significant challenge. Three-dimensional mixed-halide perovskites have potential to achieve high brightness electroluminescence, but their emission spectra are unstable as a result of halide phase separation. Here, we reveal that there is already heterogeneous distribution of halides in the as-deposited perovskite films, which can trace back to the nonuniform mixture of halides in the precursors. By simply introducing cationic surfactants to improve the homogeneity of the halides in the precursor solution, we can overcome the phase segregation issue and obtain spectrally stable single-phase blue-emitting perovskites. We demonstrate efficient blue perovskite LEDs with high brightness, e.g., luminous efficacy of 4.7, 2.9, and 0.4 lm W-1 and luminance of over 37,000, 9,300, and 1,300 cd m-2 for sky blue, blue, and deep blue with Commission Internationale de l'Eclairage (CIE) coordinates of (0.068, 0.268), (0.091, 0.165), and (0.129, 0.061), respectively, suggesting real promise of perovskites for LED applications.

Stable and bright formamidinium-based perovskite light-emitting diodes with high energy conversion efficiency.

Solution-processable perovskites show highly emissive and good charge transport, making them attractive for low-cost light-emitting diodes (LEDs) with high energy conversion efficiencies. Despite recent advances in device efficiency, the stability of perovskite LEDs is still a major obstacle. Here, we demonstrate stable and bright perovskite LEDs with high energy conversion efficiencies by optimizing formamidinium lead iodide films. Our LEDs show an energy conversion efficiency of 10.7%, and an external quantum efficiency of 14.2% without outcoupling enhancement through controlling the concentration of the precursor solutions. The device shows low efficiency droop, i.e. 8.3% energy conversion efficiency and 14.0% external quantum efficiency at a current density of 300 mA cm-2, making the device more efficient than state-of-the-art organic and quantum-dot LEDs at high current densities. Furthermore, the half-lifetime of device with benzylamine treatment is 23.7 hr under a current density of 100 mA cm-2, comparable to the lifetime of near-infrared organic LEDs.