RESUMO
Background: COVID-19 has spread worldwide and caused severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) led to numerous dead cases. However, with the new COVID-19 outbreaks, there is a shortage of personal protective equipment (PPE) especially N95 masks worldwide including Thailand. This issue had placed the health professional in great need of an alternative mask. Aim: This study aimed to measure the fit factor of 3D printed frames by quantitative fit testing (QNFT) to find an alternative facemask by using a mask fitter together with 2 different kinds of the American Society for Testing and Materials (ASTM) level 1 surgical mask. Materials and Methods: Two commonly used surgical masks (Sultan Com-Fit Super Sensitive Ear Loop Mask or "White Mask Group," not water-resistant, and Sultan Blue Com-Fit Super High Filtration Ear Loop Mask or "Blue Mask Group," water-resistant) with and without 3D printed frame covering. The fit performance was measured by a quantitative fit test (QNFT) device (PortaCount, model 8048, TSI Incorporated, Minnesota, USA) accepted by the Occupational Safety and Health Administration (OSHA). The PortaCount device, which is based on a miniature continuous flow condensation nucleus counter (CNC), assesses the respiratory fit by comparing the concentration of ambient dust particles outside the surgical mask to the concentration that has leaked into the surgical mask. The ratio of these two concentrations (Cout/Cin) is called the fit factor. A fit factor of a 3D printed frame of at least 100 is required and considered as a pass level. Results: We found that the mask fitter improves the overall performance of surgical masks significantly. The improved performance is comparable to that of N95. Conclusion: The mask fitter improves the performance of surgical masks. The authors suggested that further study on frame material, shape, and expanded sample size would be beneficial to society.
