Transcatheter pulmonary valve replacement: a new polycarbonate urethane valve.

OBJECTIVES: Transcatheter pulmonary valve replacement has become a valid treatment option for right ventricular outflow tract diseases. However, some limitations occur in patients with wide, compliant right ventricular outflow tracts that might be amenable to treatment with self-expanding valved protheses. An experimental ovine study was designed to evaluate a novel dip-coated, low-profile trileaflet polycarbonate urethane (PCU) heart valve mounted into a self-expandable nitinol stent. METHODS: The PCU valves were produced by a dip-coating technique, mounted in a conical-shaped nitinol stent and provided with a leaflet thickness of 100-150 µm. The valved stents were implanted percutaneously via transfemoral access in 6 consecutive sheep divided into 2 groups. Three animals were followed up for 1 month and the remainder, for 6 months. Angiographic measurements and transthoracic echocardiography were performed before and after implantation and at the end of the 1- or 6-month observation period, respectively. RESULTS: Orthotopic positioning of the valve was achieved in all animals. All except 1 had competent valves during the follow-up period. The peak-to-peak gradient across the PCU valved stents was 4.6 ± 1.0 mmHg after 1 month and 4.4 ± 2.3 mmHg after 6 months of follow-up. Macroscopic and microscopic post-mortem evaluation indicated good morphological and structural results. There were no stent fractures, leaflet calcification or thrombus formation. CONCLUSIONS: This study demonstrates successful transcatheter pulmonary valve replacement with a novel dip-coated valved nitinol stent. The trileaflet PCU prostheses indicated good functional and biocompatible properties after a 6-month observation period.

Transcatheter aortic valve resection: new mechanical devices.

BACKGROUND: To improve periprocedural outcomes of transcatheter aortic valve implantation (TAVI), transcatheter mechanical resection devices were tested for prior ablation of the aortic cusps. METHODS: Three mechanical transcatheter resection devices were tested in a series of native porcine (n=30) and reassembled calcified human valves (n=54). The resection time, the resected valve area, the number of released cusps, and the degree of surrounding tissue damage were measured. Afterwards, postmortem transapical-transcatheter-resections of the aortic valve in two humans were performed. RESULTS: In the native porcine hearts, the Aesculap II device demonstrated significantly shorter resection time compared to the R&R II and the Randstad devices (6.5±2.0 vs. 28.6±24.1 vs. 23.3±14.4 sec; P=0.001). However, it created more lesions in the surrounding tissue (P=0.002). The R&R II achieved a smaller number of resected cusps than the other two devices (2.7±0.7 vs. 1.1±0.7 vs. 2.4±0.5; P<0.001, respectively). It also resected a smaller area of the aortic valve (306.5±149.2 vs. 106.7±29.6 vs. 256.8±81.3 mm2; P=0.09) but a larger mean area of the resected fragments (110.3±41.5 vs. 160.7±29.6 vs. 111.5±43.9 mm2; P=0.01). The resection of the reassembled human valves demonstrated the same results between the devices regarding resection time (P=0.001) and resected area (P=0.016), but not fragment sizes (P=0.610). Finally, transapical-transcatheter-resection of aortic valve was performed in two cadavers. CONCLUSIONS: Transcatheter aortic valve resection is feasible with variable aortic leaflet resection times and mild risk of lesions of the surrounding tissue.