Intraocular lenses as drug delivery devices.

Cataract surgery is one of the most common and safe surgical procedures nowadays. However, it is not free of risks as endophthalmitis, ocular inflammation and posterior capsule opacification (PCO) can appear as post-surgery complications. The usual eye drop therapy used as prophylaxis for the former two complications has limited bioavailability. In turn, the prevention of PCO involves an adequate surgical technique and a careful choice of intraocular lens (IOL) design and material. Also, different drugs have been tested to reduce incidence of PCO, but no prophylaxis demonstrated to be completely effective. In the past few years, IOLs have been proposed as drug delivery devices to replace or/assist the usual eye drop therapy in the post-operatory period. The great advantage of drug loaded IOLs would be to ensure a continuous drug delivery, independent of patient's compliance without requiring any further action besides IOL implantation. The biggest challenge of drug loaded IOLs production is to achieve a controlled and extended release that meet therapeutic needs without inducing toxicity to the surrounding ocular tissues or affecting the physical properties of the lens. This review starts by addressing the possible complications after cataract surgery, as well as the most commonly adopted prophylaxis for each of them. The various types of IOLs are described and their main advantages/disadvantages are discussed. The different strategies pursued to incorporate drugs into the IOLs and control their release, which include soaking the IOL in the drugs solution, supercritical impregnation, surface modifications, and attachment of drug reservoirs to the IOL, among others, are reported. For each strategy, a summary of the publications is presented, which includes the target complication, the types and amounts of released drugs and the IOL materials. A brief description of each individual study is given afterwards. Optimization of drug loaded IOLs through mathematical modelling and possible issues raised by their sterilization are also tackled. At the end, the future commercialization of drug loaded IOLs is commented.

Atorvastatin-Eluting Contact Lenses: Effects of Molecular Imprinting and Sterilization on Drug Loading and Release.

Statins are receiving increasing attention in the ophthalmic field. Their activity as 3-hydroxy-3-methylglutaryl-CoA (HMG-CoA) reductase inhibitors is clinically used to regulate cholesterol levels and leads to pleiotropic effects, which may help in the management of diabetes-related ocular pathologies. This work aims to design bioinspired contact lenses (CLs) with an affinity for atorvastatin by mimicking the active site of HMG-CoA reductase. Sets of imprinted and nonimprinted 2-hydroxyethyl methacrylate (HEMA) hydrogels were synthesized, varying the contents in functional monomers that bear chemical groups that resemble those present in HMG-CoA reductase, namely, ethylene glycol phenyl ether methacrylate (EGPEM), 2-aminoethyl methacrylate hydrochloride (AEMA), and N-(3-aminopropyl) methacrylamide hydrochloride (APMA). The hydrogels were characterized in terms of suitability as CLs (solvent uptake, light transmission, mechanical properties, and biocompatibility) and capability to load and release atorvastatin. Three sterilization protocols (steam heat, gamma radiation, and high hydrostatic pressure) were implemented and their effects on hydrogel properties were evaluated. Copolymerization of AEMA and, particularly, APMA endowed the hydrogels with a high affinity for atorvastatin (up to 11 mg/g; KN/W > 200). Only high hydrostatic pressure sterilization preserved atorvastatin stability and hydrogel performance. Permeability studies through the porcine cornea and sclera tissues revealed that the amount of atorvastatin accumulated in the cornea and sclera could be effective to treat ocular surface diseases.

The effects of addition of functional monomers and molecular imprinting on dual drug release from intraocular lens material.

Although cataract surgery is considered a safe procedure, post-surgery complications such as endophthalmitis and ocular inflammation, may occur. To prevent this, antibiotics and anti-inflammatories are prescribed in the form of eye drops during the post-operatory period, but they lead to a low drug bioavailability in target tissues. The objective of this work is to develop an intraocular lens (IOL) material to deliver simultaneously one antibiotic, moxifloxacin (MXF), and one anti-inflammatory, diclofenac (DFN), in therapeutic concentrations to prevent both complications. The IOL material was modified through the incorporation of functional monomers, as well as molecular imprinting with both drugs using the same functional monomers, namely acrylic acid (AA), methacrylic acid (MAA), 4-vinylpiridine (4-VP) and a combination of MAA + 4-VP. The best results were obtained with MAA. Molecular imprinting did not influence the drug release, except with AA. Application of a mathematical model predicted that the released MXF and DFN concentrations would stay above the pre-determined MIC of S. aureus and S. epidermidis and the minimum values of IC50 of COX-1 and COX-2, for 9 and 14 days, respectively. Antibacterial tests showed that the released antibiotic remained active. The physical properties of the drug-loaded MAA-hydrogel remained adequate. The developed system proved to be non-irritant and non-cytotoxic.

Dual drug delivery from hydrophobic and hydrophilic intraocular lenses: in-vitro and in-vivo studies.

Posterior capsule opacification (PCO) still remains the most frequent long term complication after cataract surgery, while endophthalmitis is rare but severe and should be prevented at all cost. Intraocular lenses (IOLs) with different designs (eg. edge and body-haptics angle) and materials (acrylic hydrophobic and acrylic hydrophilic surfaces) have been studied to reduce PCO. For the prevention of endophthalmitis, intracameral injection followed or not by topical treatment with antibiotics and anti-inflammatories are usually prescribed. The objective of this work was to investigate the use of IOLs as controlled release platforms of two drugs, the antibiotic moxifloxacin (MXF) and the anti-inflammatory ketorolac (KTL) that could advantageously substitute the usual treatment. Two types of IOLs were chosen, hydrophobic and hydrophilic. Hydrophobic IOLs have shown better results in the prevention of PCO because they adhere better to the posterior capsular bag, while hydrophilic IOLs are advised in the case of patients with uveitis, glaucoma or diabetes. The IOLs were loaded with MXF + KTL and sterilized by high hydrostatic pressure. Both IOLs reduced the tendency for adhesion of LECs. In vivo tests were done to compare the concentration of the drugs in the aqueous humor obtained after eye drops administration and drug-loaded IOLs implantation. The developed IOLs were able to release MXF and KTL at therapeutic levels, in a sustained way, which contrasts with the eye drops prophylaxis. No PCO signs were detected and histological analyses demonstrated biocompatibility of these devices.

High Hydrostatic Pressure as Sterilization Method for Drug-Loaded Intraocular Lenses.

Sterilization is a key step in the manufacturing of drug-loaded intraocular lenses (IOLs). Two of the most used methods to sterilize commercial IOLs are steam heat and gamma radiation. However, when the IOLs are loaded with drugs, the adequacy of those methods must be questioned because sterilization may affect the activity of the drugs and/or the drug release. Recently, high hydrostatic pressure (HHP), which is increasingly used in the food industry, has been applied in the sterilization of gels for medical applications. The objective of this work was to assess the performance of HHP in the sterilization of a commercial acrylic material used for the production of IOLs, both without and with loaded drugs. Bare samples and samples loaded with an antibiotic and two anti-inflammatories were tested, and the results were compared to those obtained with conventional sterilization methods. HHP not only sterilized highly contaminated samples but also enhanced drug loading and did not affect significantly the hydrogel properties. Gamma radiation degraded the drugs in solution; thus, it is adequate only for dry sample sterilization. Steam heat did not affect the release profiles but cannot be applied to temperature-sensitive drugs. We concluded that HHP may advantageously substitute steam heat and gamma radiation in the sterilization of drug-loaded IOLs.

Moxifloxacin-loaded acrylic intraocular lenses: In vitro and in vivo performance.

PURPOSE: To assess the possibility of using acrylic intraocular lenses (IOLs) to ensure controlled and sustained release of moxifloxacin, an antibiotic commonly used for endophthalmitis prophylaxis after cataract surgery. SETTING: Academic, industrial, and clinical partners from Portugal, Belgium, Iceland, and the United States. DESIGN: Experimental study. METHODS: The physical properties of IOLs loaded with moxifloxacin by soaking were characterized. In vitro drug-release studies were performed under hydrodynamic conditions similar to those of the eye, and the activity of the released drug was tested. In vitro cytotoxicity was evaluated, and the in vivo efficacy of the devices was assessed through rabbit experiments in which the effects of topical moxifloxacin drops (control) and moxifloxacin-loaded IOLs were compared. RESULTS: The presence of moxifloxacin in the IOLs had little effect on the evaluated physical properties and did not induce cytotoxicity. In vitro drug release experiments showed that the IOLs provided controlled release of moxifloxacin for approximately 2 weeks. The drug remained active against the tested microorganisms during that period. Moxifloxacin-loaded IOLs and the control treatment induced similar in vivo behavior in terms of inflammatory reactions, capsular bag opacification scores, and uveal and capsule biocompatibility. The drug concentration in the aqueous humor after 1 week was similar in both groups; however, the concentration with the loaded IOLs was less variable. CONCLUSION: The moxifloxacin-loaded IOLs released the drug in a controlled manner, providing therapeutic levels.

Dual drug delivery from intraocular lens material for prophylaxis of endophthalmitis in cataract surgery.

Cataract is highly prevalent among old population worldwide and replacement of the opacified crystalline lens by an intraocular lens (IOL) is the safest and the most effective treatment. Although not very frequently (0.02-0.33% of the cases), the patients who undergo cataract surgery may develop endophthalmitis, which is a serious problem eventually leading to blindness. To avoid this complication, the postoperative instillation of antibiotics and anti-inflammatories is almost universally used in clinical practice. The aim of this work was to study the possibility of loading an IOL material with an antibiotic and an anti-inflammatory, which could be simultaneously released and successfully substitute the frequent instillation of topical drops for the prevention of endophthalmitis. The IOL material commercially available under the name of CI26Y (Contamac Products) was chosen and two pairs of drugs consisting of one antibiotic and one anti-inflammatory were tested: moxifloxacin + ketorolac and moxifloxacin + diclofenac. The drug loading was done by soaking under optimized conditions. Simultaneous drug loading improved the release profiles, especially in the case of moxifloxacin + ketorolac. The effect of sterilization by steam heat (carried out on the first day of loading) and by gamma-radiation upon the release profiles was negligible. The optical and mechanical properties of the sterilized, double-loaded IOL materials were kept at adequate levels. Application of a mathematical model to predict the in vivo released concentrations suggested that the most efficient system complied with the therapeutic needs: the lens loaded with moxifloxacin + ketorolac was effective against S. aureus and S. epidermidis up to 15 days, and the amount of released ketorolac remained active against inflammation for a minimum of 16 days.

Improving sustained drug delivery from ophthalmic lens materials through the control of temperature and time of loading.

Although the possibility of using drug-loaded ophthalmic lens to promote sustained drug release has been thoroughly pursued, there are still problems to be solved associated to the different alternatives. In this work, we went back to the traditional method of drug loading by soaking in the drug solution and tried to optimize the release profiles by changing the temperature and the time of loading. Two materials commercially available under the names of CI26Y and Definitive 50 were chosen. CI26Y is used for intraocular lenses (IOLs) and Definitive 50 for soft contact lenses (SCLs). Three drugs were tested: an antibiotic, moxifloxacin, and two anti-inflammatories, diclofenac and ketorolac. Sustained drug release from CI26Y disks for, at least 15 days, was obtained for moxifloxacin and diclofenac increasing the loading temperature up to 60 °C or extending the loading time till two months. The sustained release of ketorolac was limited to about 8 days. In contrast, drug release from Definitive 50 disks could not be improved by changing the loading conditions. An attempt to interpret the impact of the loading conditions on the drug release behavior was done using solid-state NMR and differential scanning calorimetry. These studies suggested the establishment of reversible, endothermic interactions between CI26Y and the drugs, moxifloxacin and diclofenac. The loading temperature had a slight effect on the mechanical and optical properties of drug loaded CI26Y samples, which still kept adequate properties to be used as IOL materials. The in vivo efficacy of CI26Y samples, drug loaded at 60 °C for two weeks, was predicted using a simplified mathematical model to estimate the drug concentration in the aqueous humor. The estimated concentrations were found to comply with the therapeutic needs, at least, for moxifloxacin and diclofenac.

Drug-eluting silicone hydrogel for therapeutic contact lenses: Impact of sterilization methods on the system performance.

Although contact lenses are promising platforms for ocular drug delivery and have been extensively studied for that purpose, the influence of sterilization methods on these systems remains barely investigated. In this work, a silicone-based hydrogel was produced and loaded with different ophthalmic drugs: levofloxacin, chlorhexidine, diclofenac and timolol. The drug release profiles, along with several material properties, were evaluated before and after sterilization by three different methods steam heat, γ-irradiation and ozone gas. Independently of the sterilization method used, the results of the swelling and mechanical properties tests strongly indicate the occurrence of specific drug-polymer interactions promoted by the sterilization. In general, these interactions led to a decrease on the amount of drug released. It is shown that γ-irradiation and ozone led to significant degradation of all of the drugs used in this study. Thus, it was concluded that steam heat is the sterilization method with less impact on the devices. More importantly, the present work shows that the development of efficient and functional drug delivery devices for ophthalmic purposes cannot be done independently of a careful analysis of the influence of the sterilization procedures and methods on the degradation of these polymeric systems as a whole.