A compact co-aperture dual-sense circularly polarized antenna for simultaneous transmit and receive systems.

This paper proposes a compact design of dual-sense circularly polarized (CP) antenna for simultaneous transmit (Tx) and receive (Rx) communication systems. The primary radiating aperture of the proposed antenna is a 2 × 2 unit-cell metasurface (MS). The MS is excited by the asymmetric patch in the center, which acts as the CP source of the whole antenna structure. By properly tuning the feeding positions, dual-sense CP with high isolation can be achieved. For verification, an antenna prototype with compact dimensions of 0.36λ × 0.36λ × 0.02λ (λ is the free-space wavelength at the center operating frequency) is fabricated and measured. The measured operating bandwidth is 1.6% (2.45-2.49 GHz), in which the reflection and transmission coefficients are less than-10 dB and the axial ratio is lower than 3 dB. Within this band, the maximum isolation value is 39 dB, and the peak gain is 5.7 dBi.

Metasurface-based dual-sense circularly polarized antenna for MIMO/full-duplex applications.

This paper introduces a two-element antenna array with dual-sense circular polarization, wideband operation, and high isolation characteristics. The antenna consists of two conventional truncated corner patches and an extra layer of metasurface (MS) located above the radiating patches. The overall dimensions of the proposed antenna are 0.92 λ0 × 0.73 λ0 × 0.05 λ0 and the element spacings are 0.02 λ0 and 0.39 λ0 with respect to edge-to-edge and center-to-center spacings. For validation, measurements on a fabricated antenna prototype are carried out. The measured data demonstrate that the presented MS-based antenna has a wide operating bandwidth of 14.5% with high isolation of better than 26 dB. The excellent performance could be concluded from the results of the investigation, which indicates that the proposed MS-based antenna could be a good candidate for multiple-input multiple-output (MIMO) and full-duplex applications.

A large-scale MIMO antenna system for 5G IoT applications.

A multiple-input-multiple-output (MIMO) antenna system with low-profile and small element spacing characteristics is presented in this paper. This antenna contains multiple elements arranged in both E-plane and H-plane configurations. The original strong coupling between the MIMO elements can be suppressed by exciting orthogonal operating modes. To achieve this, a half-wavelength microstrip line and a quarter-wavelength grounded stub are utilized to decouple the H- and E-plane MIMO arrays. A 2 × 2 antenna prototype is fabricated and measured to demonstrate the decoupling concept's feasibility. The measured impedance bandwidth is from 4.78 to 4.81 GHz. Across this band, the isolation is better than 15 dB with extremely small edge-to-edge distances of 0.032λ and 0.026λ in the E- and H-plane, respectively. Featuring the simple decoupling structure, small element spacing, and the capability of extending to a large-scale 2 × N array, the proposed antenna can be used for 5G Internet of Things (IoT) applications operating at the N79 frequency band.

A conformal multi-port MIMO patch antenna for 5G wireless devices.

This paper presents a multiple-input-multiple-output (MIMO) antenna array with low-profile and flexible characteristics. Multiple microstrip patches are arranged in the E-plane configuration and decoupled by shorted quarter-wavelength stubs. The antenna has a small element spacing of 0.032 λ, where λ is a free-space wavelength at the center frequency. To demonstrate the feasibility of the proposed concept, a 1 × 4 MIMO array prototype is fabricated. The measured results on the fabricated prototype demonstrate that the MIMO antenna has good operation features at 4.8 GHz with a reflection coefficient of less than -10 dB and an isolation of better than 20 dB. Besides, good radiation patterns and broadside gain of around 4.5 dBi are also attained. The antenna also works in the bending mode and has the capability of extending to large-scale MIMO arrays. Such attractive features prove the utility of the proposed antenna in various modern electronic devices.

Two closely spaced microstrip patches with high isolation for full-duplex/MIMO applications.

This paper shows an effective method to significantly enhance the isolation of a closely spaced two-port patch antenna, which can be deployed for full-duplex transceivers as well as multiple-input-multiple-output (MIMO) systems. Two rectangular microstrip patches are arranged in the E-plane configuration. To achieve high isolation, a grounded stub is positioned between the radiating patches. For validation of the proposed concept, an antenna prototype is fabricated for measurements. The measured data demonstrates that the port-to-port mutual coupling can be suppressed to -50 dB, which is useful in self-interference cancellation for full-duplex communication systems. Compared with the coupled design, the isolation is significantly enhanced by 43 dB with an inter-element spacing of 0.034λc, where λc is a free-space wavelength at the center operating frequency. Regarding MIMO metrics, the antenna also shows good MIMO diversity performance based on an envelope correlation coefficient and a diversity gain.

A compact metasurface-based circularly polarized antenna with high gain and high front-to-back ratio for RFID readers.

Developing a compact circularly polarized (CP) antenna with good radiation characteristics for handheld radio frequency identification (RFID) readers is a very challenging task. Many compact CP antennas have been reported in the open literature, but most suffer from critical drawbacks of low gain and/or high back radiation. This paper presents a metasurface (MS) based CP antenna with compact size, high gain, and high front-to-back ratio characteristics. The compact size of the proposed design is achieved by using a 2 × 2 unit-cell MS, while the CP realization is accomplished through a coupling between the MS and a Y-shaped patch as a primary CP source. The final antenna has compact overall dimensions of 0.45λ × 0.45λ × 0.02λ, where λ is the guided wavelength at the center frequency. The operating bandwidth is about 2.0% (2.43-2.48 GHz) and the broadside gain is about 6.3 dBi. Besides, the front-to-back ratio (FBR) defined by the difference gain levels between the forward and backward directions is about 18 dB. Compared with the related compact CP antennas in the literature, the proposed design has the advantages of high gain and high FBR, making it suitable for compact RFID readers.

Circularly Polarized MIMO Antenna with Wideband and High Isolation Characteristics for C-Band Communication Systems.

This paper presents a circularly polarized (CP) multiple-input multiple-output (MIMO) antenna using a microstrip patch and parasitic elements. The proposed design exhibits wideband characteristics for both impedance and axial ratio bandwidths. Especially, the mutual coupling between the MIMO elements is significantly depressed without using any decoupling network. To achieve these features, parasitic elements are positioned nearby and in different layers to the radiating elements. The measured results demonstrate that the proposed MIMO CP antenna has a wideband operation of 11.3% (5.0-5.6 GHz), which is defined by an overlap between -10-dB impedance and 3-dB axial ratio bandwidths. Across this band, the realized gain is better than 6.0 dBi, and the isolation is greater than 32 dB with the highest value of 45 dB. The MIMO parameters such as the envelope correlation coefficient, diversity gain, and channel capacity loss are also investigated thoroughly, which are found to be good on the scale of diversity standards.