Information geometry analysis example for absolute and relative transmission loss in a shallow ocean.

The model manifold, an information geometry tool, is a geometric representation of a model that can quantify the expected information content of modeling parameters. For a normal-mode sound propagation model in a shallow ocean environment, transmission loss (TL) is calculated for a vertical line array and model manifolds are constructed for both absolute and relative TL. For the example presented in this paper, relative TL yields more compact model manifolds with seabed environments that are less statistically distinguishable than manifolds of absolute TL. This example illustrates how model manifolds can be used to improve experimental design for inverse problems.

The training process of many deep networks explores the same low-dimensional manifold.

We develop information-geometric techniques to analyze the trajectories of the predictions of deep networks during training. By examining the underlying high-dimensional probabilistic models, we reveal that the training process explores an effectively low-dimensional manifold. Networks with a wide range of architectures, sizes, trained using different optimization methods, regularization techniques, data augmentation techniques, and weight initializations lie on the same manifold in the prediction space. We study the details of this manifold to find that networks with different architectures follow distinguishable trajectories, but other factors have a minimal influence; larger networks train along a similar manifold as that of smaller networks, just faster; and networks initialized at very different parts of the prediction space converge to the solution along a similar manifold.

Data-driven decomposition of crowd noise from indoor sporting events.

Separating crowd responses from raw acoustic signals at sporting events is challenging because recordings contain complex combinations of acoustic sources, including crowd noise, music, individual voices, and public address (PA) systems. This paper presents a data-driven decomposition of recordings of 30 collegiate sporting events. The decomposition uses machine-learning methods to find three principal spectral shapes that separate various acoustic sources. First, the distributions of recorded one-half-second equivalent continuous sound levels from men's and women's basketball and volleyball games are analyzed with regard to crowd size and venue. Using 24 one-third-octave bands between 50 Hz and 10 kHz, spectrograms from each type of game are then analyzed. Based on principal component analysis, 87.5% of the spectral variation in the signals can be represented with three principal components, regardless of sport, venue, or crowd composition. Using the resulting three-dimensional component coefficient representation, a Gaussian mixture model clustering analysis finds nine different clusters. These clusters separate audibly distinct signals and represent various combinations of acoustic sources, including crowd noise, music, individual voices, and the PA system.

Toward a dynamic national transportation noise map: Modeling temporal variability of traffic volume.

The National Transportation Noise Map (NTNM) gives time-averaged traffic noise across the continental United States (CONUS) using annual average daily traffic. However, traffic noise varies significantly with time. This paper outlines the development and utility of a traffic volume model which is part of VROOM, the Vehicular Reduced-Order Observation-based model, which, using hourly traffic volume data from thousands of traffic monitoring stations across CONUS, predicts nationwide hourly varying traffic source noise. Fourier analysis finds daily, weekly, and yearly temporal traffic volume cycles at individual traffic monitoring stations. Then, principal component analysis uses denoised Fourier spectra to find the most widespread cyclic traffic patterns. VROOM uses nine principal components to represent hourly traffic characteristics for any location, encapsulating daily, weekly, and yearly variation. The principal component coefficients are predicted across CONUS using location-specific features. Expected traffic volume model sound level errors-obtained by comparing predicted traffic counts to measured traffic counts-and expected NTNM-like errors, are presented. VROOM errors are typically within a couple of decibels, whereas NTNM-like errors are often inaccurate, even exceeding 10 decibels. This work details the first steps towards creation of a temporally and spectrally variable national transportation noise map.

Recurrence Quantification Analysis of Crowd Sound Dynamics.

When multiple individuals interact in a conversation or as part of a large crowd, emergent structures and dynamics arise that are behavioral properties of the interacting group rather than of any individual member of that group. Recent work using traditional signal processing techniques and machine learning has demonstrated that global acoustic data recorded from a crowd at a basketball game can be used to classify emergent crowd behavior in terms of the crowd's purported emotional state. We propose that the description of crowd behavior from such global acoustic data could benefit from nonlinear analysis methods derived from dynamical systems theory. Such methods have been used in recent research applying nonlinear methods to audio data extracted from music and group musical interactions. In this work, we used nonlinear analyses to extract features that are relevant to the behavioral interactions that underlie acoustic signals produced by a crowd attending a sporting event. We propose that recurrence dynamics measured from these audio signals via recurrence quantification analysis (RQA) reflect information about the behavioral dynamics of the crowd itself. We analyze these dynamics from acoustic signals recorded from crowds attending basketball games, and that were manually labeled according to the crowds' emotional state across six categories: angry noise, applause, cheer, distraction noise, positive chant, and negative chant. We show that RQA measures are useful to differentiate the emergent acoustic behavioral dynamics between these categories, and can provide insight into the recurrence patterns that underlie crowd interactions.

Feature selection for a continental-scale geospatial model of environmental sound levels.

Modeling environmental sound levels over continental scales is difficult due to the variety of geospatial environments. Moreover, current continental-scale models depend upon machine learning and therefore face additional challenges due to limited acoustic training data. In previous work, an ensemble of machine learning models was used to predict environmental sound levels in the contiguous United States using a training set composed of 51 geospatial layers (downselected from 120) and acoustic data from 496 geographic sites from Pedersen, Transtrum, Gee, Lympany, James, and Salton [JASA Express Lett. 1(12), 122401 (2021)]. In this paper, the downselection process, which is based on factors such as data quality and inter-feature correlations, is described in further detail. To investigate additional dimensionality reduction, four different feature selection methods are applied to the 51 layers. Leave-one-out median absolute deviation cross-validation errors suggest that the number of geospatial features can be reduced to 15 without significant degradation of the model's predictive error. However, ensemble predictions demonstrate that feature selection results are sensitive to variations in details of the problem formulation and, therefore, should elicit some skepticism. These results suggest that more sophisticated dimensionality reduction techniques are necessary for problems with limited training data and different training and testing distributions.

Sloppy model analysis identifies bifurcation parameters without normal form analysis.

Bifurcation phenomena are common in multidimensional multiparameter dynamical systems. Normal form theory suggests that bifurcations are driven by relatively few combinations of parameters. Models of complex systems, however, rarely appear in normal form, and bifurcations are controlled by nonlinear combinations of the bare parameters of differential equations. Discovering reparameterizations to transform complex equations into a normal form is often very difficult, and the reparameterization may not even exist in a closed form. Here we show that information geometry and sloppy model analysis using the Fisher information matrix can be used to identify the combination of parameters that control bifurcations. By considering observations on increasingly long timescales, we find those parameters that rapidly characterize the system's topological inhomogeneities, whether the system is in normal form or not. We anticipate that this novel analytical method, which we call time-widening information geometry (TWIG), will be useful in applied network analysis.

Information geometry for multiparameter models: new perspectives on the origin of simplicity.

Complex models in physics, biology, economics, and engineering are oftensloppy, meaning that the model parameters are not well determined by the model predictions for collective behavior. Many parameter combinations can vary over decades without significant changes in the predictions. This review uses information geometry to explore sloppiness and its deep relation to emergent theories. We introduce themodel manifoldof predictions, whose coordinates are the model parameters. Itshyperribbonstructure explains why only a few parameter combinations matter for the behavior. We review recent rigorous results that connect the hierarchy of hyperribbon widths to approximation theory, and to the smoothness of model predictions under changes of the control variables. We discuss recent geodesic methods to find simpler models on nearby boundaries of the model manifold-emergent theories with fewer parameters that explain the behavior equally well. We discuss a Bayesian prior which optimizes the mutual information between model parameters and experimental data, naturally favoring points on the emergent boundary theories and thus simpler models. We introduce a 'projected maximum likelihood' prior that efficiently approximates this optimal prior, and contrast both to the poor behavior of the traditional Jeffreys prior. We discuss the way the renormalization group coarse-graining in statistical mechanics introduces a flow of the model manifold, and connect stiff and sloppy directions along the model manifold with relevant and irrelevant eigendirections of the renormalization group. Finally, we discuss recently developed 'intensive' embedding methods, allowing one to visualize the predictions of arbitrary probabilistic models as low-dimensional projections of an isometric embedding, and illustrate our method by generating the model manifold of the Ising model.

Utilizing Nonequilibrium Isotope Enrichments to Dramatically Increase Turnover Measurement Ranges in Single Biopsy Samples from Humans.

The synthesis of new proteins and the degradation of old proteins in vivo can be quantified in serial samples using metabolic isotope labeling to measure turnover. Because serial biopsies in humans are impractical, we set out to develop a method to calculate the turnover rates of proteins from single human biopsies. This method involved a new metabolic labeling approach and adjustments to the calculations used in previous work to calculate protein turnover. We demonstrate that using a nonequilibrium isotope enrichment strategy avoids the time dependent bias caused by variable lag in label delivery to different tissues observed in traditional metabolic labeling methods. Turnover rates are consistent for the same subject in biopsies from different labeling periods, and turnover rates calculated in this study are consistent with previously reported values. We also demonstrate that by measuring protein turnover we can determine where proteins are synthesized. In human subjects a significant difference in turnover rates differentiated proteins synthesized in the salivary glands versus those imported from the serum. We also provide a data analysis tool, DeuteRater-H, to calculate protein turnover using this nonequilibrium metabolic 2H2O method.

Bayesian, frequentist, and information geometric approaches to parametric uncertainty quantification of classical empirical interatomic potentials.

In this paper, we consider the problem of quantifying parametric uncertainty in classical empirical interatomic potentials (IPs) using both Bayesian (Markov Chain Monte Carlo) and frequentist (profile likelihood) methods. We interface these tools with the Open Knowledgebase of Interatomic Models and study three models based on the Lennard-Jones, Morse, and Stillinger-Weber potentials. We confirm that IPs are typically sloppy, i.e., insensitive to coordinated changes in some parameter combinations. Because the inverse problem in such models is ill-conditioned, parameters are unidentifiable. This presents challenges for traditional statistical methods, as we demonstrate and interpret within both Bayesian and frequentist frameworks. We use information geometry to illuminate the underlying cause of this phenomenon and show that IPs have global properties similar to those of sloppy models from fields, such as systems biology, power systems, and critical phenomena. IPs correspond to bounded manifolds with a hierarchy of widths, leading to low effective dimensionality in the model. We show how information geometry can motivate new, natural parameterizations that improve the stability and interpretation of uncertainty quantification analysis and further suggest simplified, less-sloppy models.

Automatic classification and reduction of wind noise in spectral data.

Outdoor acoustic data often include non-acoustic pressures caused by atmospheric turbulence, particularly below a few hundred Hz in frequency, even when using microphone windscreens. This paper describes a method for automatic wind-noise classification and reduction in spectral data without requiring measured wind speeds. The method finds individual frequency bands matching the characteristic decreasing spectral slope of wind noise. Uncontaminated data from several short-timescale spectra can be used to obtain a decontaminated long-timescale spectrum. This method is validated with field-test data and can be applied to large datasets to efficiently find and reduce the negative impact of wind noise contamination.

Validating two geospatial models of continental-scale environmental sound levels.

Modeling outdoor environmental sound levels is a challenging problem. This paper reports on a validation study of two continental-scale machine learning models using geospatial layers as inputs and the summer daytime A-weighted L50 as a validation metric. The first model was developed by the National Park Service while the second was developed by the present authors. Validation errors greater than 20 dBA are observed. Large errors are attributed to limited acoustic training data. Validation environments are geospatially dissimilar to training sites, requiring models to extrapolate beyond their training sets. Results motivate further work in optimal data collection and uncertainty quantification.

Unwinding the model manifold: Choosing similarity measures to remove local minima in sloppy dynamical systems.

In this paper, we consider the problem of parameter sensitivity in models of complex dynamical systems through the lens of information geometry. We calculate the sensitivity of model behavior to variations in parameters. In most cases, models are sloppy, that is, exhibit an exponential hierarchy of parameter sensitivities. We propose a parameter classification scheme based on how the sensitivities scale at long observation times. We show that for oscillatory models, either with a limit cycle or a strange attractor, sensitivities can become arbitrarily large, which implies a high effective dimensionality on the model manifold. Sloppy models with a single fixed point have model manifolds with low effective dimensionality, previously described as a "hyper-ribbon." In contrast, models with high effective dimensionality translate into multimodal fitting problems. We define a measure of curvature on the model manifold which we call the winding frequency that estimates the density of local minima in the model's parameter space. We then show how alternative choices of fitting metrics can "unwind" the model manifold and give low winding frequencies. This prescription translates the model manifold from one of high effective dimensionality into the hyper-ribbon structures observed elsewhere. This translation opens the door for applications of sloppy model analysis and model reduction methods developed for models with low effective dimensionality.

Maximizing the information learned from finite data selects a simple model.

We use the language of uninformative Bayesian prior choice to study the selection of appropriately simple effective models. We advocate for the prior which maximizes the mutual information between parameters and predictions, learning as much as possible from limited data. When many parameters are poorly constrained by the available data, we find that this prior puts weight only on boundaries of the parameter space. Thus, it selects a lower-dimensional effective theory in a principled way, ignoring irrelevant parameter directions. In the limit where there are sufficient data to tightly constrain any number of parameters, this reduces to the Jeffreys prior. However, we argue that this limit is pathological when applied to the hyperribbon parameter manifolds generic in science, because it leads to dramatic dependence on effects invisible to experiment.

The Spectrum of Mechanism-Oriented Models and Methods for Explanations of Biological Phenomena.

Developing and improving mechanism-oriented computational models to better explain biological phenomena is a dynamic and expanding frontier. As the complexity of targeted phenomena has increased, so too has the diversity in methods and terminologies, often at the expense of clarity, which can make reproduction challenging, even problematic. To encourage improved semantic and methodological clarity, we describe the spectrum of Mechanism-oriented Models being used to develop explanations of biological phenomena. We cluster explanations of phenomena into three broad groups. We then expand them into seven workflow-related model types having distinguishable features. We name each type and illustrate with examples drawn from the literature. These model types may contribute to the foundation of an ontology of mechanism-based biomedical simulation research. We show that the different model types manifest and exert their scientific usefulness by enhancing and extending different forms and degrees of explanation. The process starts with knowledge about the phenomenon and continues with explanatory and mathematical descriptions. Those descriptions are transformed into software and used to perform experimental explorations by running and examining simulation output. The credibility of inferences is thus linked to having easy access to the scientific and technical provenance from each workflow stage.

Calorimetric Methods for Measuring Stability and Reusability of Membrane Immobilized Enzymes.

The aim of this work is to develop calorimetric methods for characterizing the activity and stability of membrane immobilized enzymes. Invertase immobilized on a nylon-6 nanofiber membrane is used as a test case. The stability of both immobilized and free invertase activity was measured by spectrophotometry and isothermal titration calorimetry (ITC). Differential scanning calorimetry was used to measure the thermal stability of the structure and areal concentration of invertase on the membrane. This is the 1st demonstration that ITC can be used to determine activity and stability of an enzyme immobilized on a membrane. ITC and spectrophotometry show maximum activity of free and immobilized invertase at pH 4.5 and 45 to 55 °C. ITC determination of the activity as a function of temperature over an 8-h period shows a similar decline of activity of both free and immobilized invertase at 55 °C. PRACTICAL APPLICATION: Enzyme-catalyzed reactions occur in mild and environmentally friendly conditions, but are usually too costly to use in food manufacturing. When free enzymes are used, they are used once and replaced for each reaction, but enzymes immobilized on a solid support can be reused and have the additional advantage of being removed from the product. In this study, new calorimetric methods that are universally applicable to characterizing immobilized enzymes are used to determine the activity, stability, and reusability of invertase immobilized on a nanofiber support.

Mechanisms of In Vivo Ribosome Maintenance Change in Response to Nutrient Signals.

Control of protein homeostasis is fundamental to the health and longevity of all organisms. Because the rate of protein synthesis by ribosomes is a central control point in this process, regulation, and maintenance of ribosome function could have amplified importance in the overall regulatory circuit. Indeed, ribosomal defects are commonly associated with loss of protein homeostasis, aging, and disease (1-4), whereas improved protein homeostasis, implying optimal ribosomal function, is associated with disease resistance and increased lifespan (5-7). To maintain a high-quality ribosome population within the cell, dysfunctional ribosomes are targeted for autophagic degradation. It is not known if complete degradation is the only mechanism for eukaryotic ribosome maintenance or if they might also be repaired by replacement of defective components. We used stable-isotope feeding and protein mass spectrometry to measure the kinetics of turnover of ribosomal RNA (rRNA) and 71 ribosomal proteins (r-proteins) in mice. The results indicate that exchange of individual proteins and whole ribosome degradation both contribute to ribosome maintenance in vivo In general, peripheral r-proteins and those with more direct roles in peptide-bond formation are replaced multiple times during the lifespan of the assembled structure, presumably by exchange with a free cytoplasmic pool, whereas the majority of r-proteins are stably incorporated for the lifetime of the ribosome. Dietary signals impact the rates of both new ribosome assembly and component exchange. Signal-specific modulation of ribosomal repair and degradation could provide a mechanistic link in the frequently observed associations among diminished rates of protein synthesis, increased autophagy, and greater longevity (5, 6, 8, 9).

The Limitations of Model-Based Experimental Design and Parameter Estimation in Sloppy Systems.

We explore the relationship among experimental design, parameter estimation, and systematic error in sloppy models. We show that the approximate nature of mathematical models poses challenges for experimental design in sloppy models. In many models of complex biological processes it is unknown what are the relevant physical mechanisms that must be included to explain system behaviors. As a consequence, models are often overly complex, with many practically unidentifiable parameters. Furthermore, which mechanisms are relevant/irrelevant vary among experiments. By selecting complementary experiments, experimental design may inadvertently make details that were ommitted from the model become relevant. When this occurs, the model will have a large systematic error and fail to give a good fit to the data. We use a simple hyper-model of model error to quantify a model's discrepancy and apply it to two models of complex biological processes (EGFR signaling and DNA repair) with optimally selected experiments. We find that although parameters may be accurately estimated, the discrepancy in the model renders it less predictive than it was in the sloppy regime where systematic error is small. We introduce the concept of a sloppy system-a sequence of models of increasing complexity that become sloppy in the limit of microscopic accuracy. We explore the limits of accurate parameter estimation in sloppy systems and argue that identifying underlying mechanisms controlling system behavior is better approached by considering a hierarchy of models of varying detail rather than focusing on parameter estimation in a single model.

Bridging Mechanistic and Phenomenological Models of Complex Biological Systems.

The inherent complexity of biological systems gives rise to complicated mechanistic models with a large number of parameters. On the other hand, the collective behavior of these systems can often be characterized by a relatively small number of phenomenological parameters. We use the Manifold Boundary Approximation Method (MBAM) as a tool for deriving simple phenomenological models from complicated mechanistic models. The resulting models are not black boxes, but remain expressed in terms of the microscopic parameters. In this way, we explicitly connect the macroscopic and microscopic descriptions, characterize the equivalence class of distinct systems exhibiting the same range of collective behavior, and identify the combinations of components that function as tunable control knobs for the behavior. We demonstrate the procedure for adaptation behavior exhibited by the EGFR pathway. From a 48 parameter mechanistic model, the system can be effectively described by a single adaptation parameter τ characterizing the ratio of time scales for the initial response and recovery time of the system which can in turn be expressed as a combination of microscopic reaction rates, Michaelis-Menten constants, and biochemical concentrations. The situation is not unlike modeling in physics in which microscopically complex processes can often be renormalized into simple phenomenological models with only a few effective parameters. The proposed method additionally provides a mechanistic explanation for non-universal features of the behavior.

Enzyme-catalyzed and binding reaction kinetics determined by titration calorimetry.

BACKGROUND: Isothermal calorimetry allows monitoring of reaction rates via direct measurement of the rate of heat produced by the reaction. Calorimetry is one of very few techniques that can be used to measure rates without taking a derivative of the primary data. Because heat is a universal indicator of chemical reactions, calorimetry can be used to measure kinetics in opaque solutions, suspensions, and multiple phase systems and does not require chemical labeling. The only significant limitation of calorimetry for kinetic measurements is that the time constant of the reaction must be greater than the time constant of the calorimeter which can range from a few seconds to a few minutes. Calorimetry has the unique ability to provide both kinetic and thermodynamic data. SCOPE OF REVIEW: This article describes the calorimetric methodology for determining reaction kinetics and reviews examples from recent literature that demonstrate applications of titration calorimetry to determine kinetics of enzyme-catalyzed and ligand binding reactions. MAJOR CONCLUSIONS: A complete model for the temperature dependence of enzyme activity is presented. A previous method commonly used for blank corrections in determinations of equilibrium constants and enthalpy changes for binding reactions is shown to be subject to significant systematic error. GENERAL SIGNIFICANCE: Methods for determination of the kinetics of enzyme-catalyzed reactions and for simultaneous determination of thermodynamics and kinetics of ligand binding reactions are reviewed.