Correlated optical and structural analyses of individual GaAsP/GaP core-shell nanowires.

We report on the structural and optical properties of GaAs0.7P0.3/GaP core-shell nanowires (NWs) for future photovoltaic applications. The NWs are grown by self-catalyzed molecular beam epitaxy. Scanning transmission electron microscopy (STEM) analyses demonstrate that the GaAsP NW core develops an inverse-tapered shape with a formation of an unintentional GaAsP shell having a lower P content. Without surface passivation, this unintentional shell produces no luminescence because of strong surface recombination. However, passivation of the surface with a GaP shell leads to the appearance of a secondary peak in the luminescence spectrum arising from this unintentional shell. The attribution of the luminescence peaks is confirmed by correlated cathodoluminescence and STEM analyses of the same NW.

Optical properties of GaN nanowires grown on chemical vapor deposited-graphene.

Optical properties of GaN nanowires (NWs) grown on chemical vapor deposited-graphene transferred on an amorphous support are reported. The growth temperature was optimized to achieve a high NW density with a perfect selectivity with respect to a SiO2 surface. The growth temperature window was found to be rather narrow (815°C ± 5°C). Steady-state and time-resolved photoluminescence from GaN NWs grown on graphene was compared with the results for GaN NWs grown on conventional substrates within the same molecular beam epitaxy reactor showing a comparable optical quality for different substrates. Growth at temperatures above 820 °C led to a strong NW density reduction accompanied with a diameter narrowing. This morphology change leads to a spectral blueshift of the donor-bound exciton emission line due to either surface stress or dielectric confinement. Graphene multi-layered micro-domains were explored as a way to arrange GaN NWs in a hollow hexagonal pattern. The NWs grown on these domains show a luminescence spectral linewidth as low as 0.28 meV (close to the set-up resolution limit).

In situ passivation of GaAsP nanowires.

We report on the structural and optical properties of GaAsP nanowires (NWs) grown by molecular-beam epitaxy. By adjusting the alloy composition in the NWs, the transition energy was tuned to the optimal value required for tandem III-V/silicon solar cells. We discovered that an unintentional shell was also formed during the GaAsP NW growth. The NW surface was passivated by an in situ deposition of a radial Ga(As)P shell. Different shell compositions and thicknesses were investigated. We demonstrate that the optimal passivation conditions for GaAsP NWs (with a gap of 1.78 eV) are obtained with a 5 nm thick GaP shell. This passivation enhances the luminescence intensity of the NWs by 2 orders of magnitude and yields a longer luminescence decay. The luminescence dynamics changes from single exponential decay with a 4 ps characteristic time in non-passivated NWs to a bi-exponential decay with characteristic times of 85 and 540 ps in NWs with GaP shell passivation.

Piezo-generator integrating a vertical array of GaN nanowires.

We demonstrate the first piezo-generator integrating a vertical array of GaN nanowires (NWs). We perform a systematic multi-scale analysis, going from single wire properties to macroscopic device fabrication and characterization, which allows us to establish for GaN NWs the relationship between the material properties and the piezo-generation, and to propose an efficient piezo-generator design. The piezo-conversion of individual MBE-grown p-doped GaN NWs in a dense array is assessed by atomic force microscopy (AFM) equipped with a Resiscope module yielding an average output voltage of 228 ± 120 mV and a maximum value of 350 mV generated per NW. In the case of p-doped GaN NWs, the piezo-generation is achieved when a positive piezo-potential is created inside the nanostructures, i.e. when the NWs are submitted to compressive deformation. The understanding of the piezo-generation mechanism in our GaN NWs, gained from AFM analyses, is applied to design a piezo-generator operated under compressive strain. The device consists of NW arrays of several square millimeters in size embedded into spin-on glass with a Schottky contact for rectification and collection of piezo-generated carriers. The generator delivers a maximum power density of ∼12.7 mW cm(-3). This value sets the new state of the art for piezo-generators based on GaN NWs and more generally on nitride NWs, and offers promising prospects for the use of GaN NWs as high-efficiency ultra-compact energy harvesters.

Genetic variation but weak genetic covariation between pre- and post-copulatory episodes of sexual selection in Drosophila melanogaster.

When females mate polyandrously, male reproductive success depends both on the male's ability to attain matings and on his ability to outcompete rival males in the fertilization of ova post-copulation. Increased investment in  ejaculate components may trade off with investment in precopulatory traits due to resource allocation. Alternatively, pre- and post-copulatory traits could be positively related if individuals can afford to invest heavily in traits advantageous at both episodes of selection. There is empirical evidence for both positive and negative associations between pre- and post-copulatory episodes, but little is known about the genetic basis of these correlations. In this study, we measured morphological, chemical and behavioural precopulatory male traits and investigated their relationship with measures of male fitness (male mating success, remating inhibition and offensive sperm competitiveness) across 40 isofemale lines of Drosophila melanogaster. We found significant variation among isofemale lines, indicating a genetic basis for most of the traits investigated. However, we found weak evidence for genetic correlations between precopulatory traits and our indices of male fitness. Moreover, pre- and post-copulatory episodes of selection were uncorrelated, suggesting selection may act independently at the different episodes to maximize male reproductive success.

Additive genetic variance in polyandry enables its evolution, but polyandry is unlikely to evolve through sexy or good sperm processes.

Polyandry is widespread despite its costs. The sexually selected sperm hypotheses ('sexy' and 'good' sperm) posit that sperm competition plays a role in the evolution of polyandry. Two poorly studied assumptions of these hypotheses are the presence of additive genetic variance in polyandry and sperm competitiveness. Using a quantitative genetic breeding design in a natural population of Drosophila melanogaster, we first established the potential for polyandry to respond to selection. We then investigated whether polyandry can evolve through sexually selected sperm processes. We measured lifetime polyandry and offensive sperm competitiveness (P2 ) while controlling for sampling variance due to male × male × female interactions. We also measured additive genetic variance in egg-to-adult viability and controlled for its effect on P2 estimates. Female lifetime polyandry showed significant and substantial additive genetic variance and evolvability. In contrast, we found little genetic variance or evolvability in P2 or egg-to-adult viability. Additive genetic variance in polyandry highlights its potential to respond to selection. However, the low levels of genetic variance in sperm competitiveness suggest that the evolution of polyandry may not be driven by sexy sperm or good sperm processes.

Morphology of self-catalyzed GaN nanowires and chronology of their formation by molecular beam epitaxy.

GaN nanowires are synthesized by plasma-assisted molecular beam epitaxy on Si(111) substrates. The strong impact of the cell orientation relative to the substrate on the nanowire morphology is shown. To study the kinetics of growth, thin AlN markers are introduced periodically during NW growth. These markers are observed in single nanowires by transmission electron microscopy, giving access to the chronology of the nanowire formation and to the time evolution of the nanowire morphology. A long delay precedes the beginning of nanowire formation. Then, their elongation proceeds at a constant rate. Later, shells develop on the side-wall facets by ascending growth of layer bunches which first agglomerate at the nanowire foot.

Epitaxial graphene on cubic SiC(111)Si(111) substrate.

Epitaxial graphene films grown on silicon carbide (SiC) substrate by solid state graphitization is of great interest for electronic and optoelectronic applications. In this paper, we explore the properties of epitaxial graphene films on 3C-SiC(111)Si(111) substrate. X-ray photoelectron spectroscopy and scanning tunneling microscopy were extensively used to characterize the quality of the few-layer graphene (FLG) surface. The Raman spectroscopy studies were useful in confirming the graphitic composition and measuring the thickness of the FLG samples.

Temperature conditions for GaAs nanowire formation by Au-assisted molecular beam epitaxy.

Molecular beam epitaxial growth of GaAs nanowires using Au particles as a catalyst was investigated. Prior to the growth during annealing, Au alloyed with Ga coming from the GaAs substrate, and melted. Phase transitions of the resulting particles were observed in situ by reflection high-energy electron diffraction (RHEED). The temperature domain in which GaAs nanowire growth is possible was determined. The lower limit of this domain (320 °C) is close to the observed catalyst solidification temperature. Below this temperature, the catalyst is buried by GaAs growth. Above the higher limit (620 °C), the catalyst segregates on the surface with no significant nanowire formation. Inside this domain, the influence of growth temperature on the nanowire morphology and crystalline structure was investigated in detail by scanning electron microscopy and transmission electron microscopy. The correlation of the nanowire morphology with the RHEED patterns observed during the growth was established. Wurtzite GaAs was found to be the dominant crystal structure of the wires.

Malignant effusions are sources of fibronectin and other promigratory and proinvasive components.

Metastatic dissemination is the primary cause of death in ovarian cancer (OvCa) patients, and dissemination to pleural and peritoneal effusions is a common clinical event. Effusion samples were collected from 15 OvCa patients. Twenty-six samples were collected prospectively, two were archival, and eight were taken from patients with other malignancies. Twenty-nine samples were from malignant ascites, and seven specimens were pleural fluids. In addition, six ascites and two pleural fluids from noncancer patients were studied as effusion controls. Effusion supernatants were tested for migration-stimulation activity, using A2058 human melanoma cells as the index responder cell. Malignant samples induced a 400-1200% increase in migration. Sixty percent of the migration was inhibited by incubation of the malignant fluid with antifibronectin (FN) antibody, in contrast to 75% inhibition of control fluid-stimulated migration (P = 0.017). Gelatin zymography and Western blot analyses showed that latent and activated MMP-2 and MMP-9 collagenases, and tissue inhibitor of metalloproteinase-2 (TIMP-2) were present in all malignant fluids. Serial samples were taken from several patients, and a trend for correlation between MMPs and clinical behavior of the tumors was shown. Free TIMP-2 correlated with CA-125 levels in two patients for whom serial samples were available. The demonstration of promigratory and proinvasive activity in malignant effusions is consistent with their association with other metastatic disease in OvCa patients and their function as a haven for metastatic cells.