Oak Leaves as a Raw Material for the Production of Alcoholic Fermented Beverages.

This study aimed to point out the possible use of oak leaves (Q. petraea) in the production of fermented alcoholic beverages. Parameters such as antioxidant capacity, total phenolic content, phenolics and sugars were determined using spectrophotometric and chromatographic methods. pH values were also determined, and in the final product with a fermentation length of 85 days, the alcohol content was determined and sensory analysis performed. The antioxidant capacity of the beverage was lower compared to the infusions before fermentation, and its highest values were recorded in the leaf samples, in which the highest values of phenolic compounds and the total phenolic content were also recorded. A decrease in the content of total phenolics was recorded with the increasing length of fermentation in beverage samples. However, the fermentation process had a positive effect on the contents of some phenolic substances such as catechin, gallic acid and gallocatechin. Sensory analysis showed a higher acceptability of the fermented beverage without the addition of orange, which could be caused by the higher sugar content in these samples. Oak leaves therefore represent a suitable raw material for the production of a fermented alcoholic beverage, without the need to enrich the taste with other ingredients.

Nanometals incorporation into active and biodegradable chitosan films.

This study investigates the effects of incorporating ZnO, TiO2, and colloidal Ag nanoparticles on the antioxidant, antimicrobial, and physical properties of biodegradable chitosan films. The research focuses on addressing the growing demand for sustainable packaging solutions that offer efficient food preservation while mitigating environmental concerns. In this investigation, the physical properties including thickness, water content, solubility, swelling degree, tensile strength, and elasticity of the chitosan films were examined. Additionally, the samples were analyzed for total polyphenol content, antimicrobial activity, and antioxidant capacity. Notably, the incorporation of ZnO nanoparticles led to the lowest water content and highest strength values among the tested films. Conversely, the addition of colloidal Ag nanoparticles resulted in films with the highest antioxidant capacities (DPPH: 32.202 ± 1.631 %). Remarkably, antimicrobial tests revealed enhanced activity with the inclusion of colloidal silver nanoparticles, yet the most potent antimicrobial properties were observed in films containing ZnO (E.coli: 2.0 ± 0.0 mm; MRSA: 2.0 ± 0.5 mm). The findings of this study hold significant implications for the advancement of edible biodegradable films, offering potential for more efficient food packaging solutions that address environmental sustainability concerns. By elucidating the effects of nanoparticle incorporation on film properties, this research contributes to the ongoing discourse surrounding sustainable packaging solutions in the food industry.

Effect of Trehalose/OEO/Tween 80/Tween 20 Addition on Physical Stability of Edible Packaging during Storage in Different Humidity Conditions.

Edible packaging has been a topic of much discussion during recent years, mainly due to its lower environmental impact. This study aimed to investigate the properties of an edible packaging made from a combination of carrageenan, orange essential oil (OEO), and trehalose (Tre) under different humidity conditions. The films were analyzed based on their water content, solubility, and textural properties, such as strength and breaking strain. The results of the study showed that the addition of trehalose reduced the water content and increased the strength of the packaging, regardless of the humidity conditions. The inclusion of orange essential oil also contributed to lower water content, which led to more water-resistant packaging (during standard humidity conditions (45%)-c: 15.31%; Tre3OT80: 4.04%, Tre1OT80: 4.48%). The findings of this study have important implications for the production of stable and environmentally friendly edible packaging. The results demonstrate the potential of trehalose and orange essential oil as additives to enhance the properties of edible packaging, particularly in terms of its resistance to moisture. The best results were found in Tre1OT80 and Tre3OT80 samples. Moreover, the study emphasizes the importance of considering storage conditions in the development of edible packaging, as different humidity levels can significantly affect the packaging's properties and shelf life. The findings have practical applications for the food industry, particularly in the development of sustainable packaging solutions and for further studies where the application of this packaging can be analyzed for different foodstuffs.

Edible/Biodegradable Packaging with the Addition of Spent Coffee Grounds Oil.

BACKGROUND: Following petroleum, coffee ranks as the second most extensively exchanged commodity worldwide. The definition of spent coffee ground (SCG) can be outlined as the waste generated after consuming coffee. The aims of the study are to produce edible/biodegradable packaging with the addition of spent coffee grounds (SCG) oil and to investigate how this fortification can affect chemical, textural, and solubility properties of experimentally produced films. METHODS: The produced films were based on κ-carrageenan and pouring-drying techniques in petri dishes. Two types of emulsifiers were used: Tween 20 and Tween 80. The films were analyzed by antioxidant and textural analysis, and their solubility was also tested. RESULTS: Edible/biodegradable packaging samples produced with the addition of SCG oil showed higher (p < 0.05) antioxidant capacity in comparison with control samples produced without the addition of SCG oil. The results of the research showed that the fortification of edible/biodegradable packaging with the addition of SCG oil changed significantly (p < 0.05) both chemical and physical properties of the films. CONCLUSIONS: Based on the findings obtained, it was indicated that films manufactured utilizing SCG oil possess considerable potential to serve as an effective and promising material for active food packaging purposes.

Sulfur content in foods and beverages and its role in human and animal metabolism: A scoping review of recent studies.

Sulfur is a vital element that all living things require, being a component of proteins and other bio-organic substances. The various kinds and varieties of microbes in nature allow for the transformation of this element. It also should be emphasized that volatile sulfur compounds are typically present in food in trace amounts. Life cannot exist without sulfur, yet it also poses a potential health risk. The colon's sulfur metabolism, which is managed by eukaryotic cells, is much better understood than the S metabolism in gastrointestinal bacteria. Numerous additional microbial processes are anticipated to have an impact on the content and availability of sulfated compounds, as well as intestinal S metabolism. Hydrogen sulfide is the sulfur derivative that has attracted the most attention in relation to colonic health, but it is still unclear whether it is beneficial or harmful. Several lines of evidence suggest that sulfate-reducing bacteria or exogenous hydrogen sulfide may be the root cause of intestinal ailments, including inflammatory bowel diseases and colon cancer. Taurine serves a variety of biological and physiological purposes, including roles in inflammation and protection, additionally, low levels of taurine can be found in bodily fluids, and taurine is the primary sulfur component present in muscle tissue (serum and urine). The aim of this scoping review was to compile data from the most pertinent scientific works about S compounds' existence in food and their metabolic processes. The importance of S compounds in various food products and how these compounds can impact metabolic processes are both stressed in this paper.

Nanoparticles and Plant By-Products for Edible Coatings Production: A Case Study with Zinc, Titanium, and Silver.

For the development of functional edible packaging that will not lead to rejection by the consumer, it is needed to analyze the interactions between ingredients in the packaging matrix. The aim of this study was to develop edible chitosan-based coatings that have been enriched with red grape extracts, zinc, silver, and titanium nanoparticles. The organoleptic properties of the produced edible packaging were described by quantitative descriptive analysis and consumer acceptability was verified by hedonic analysis. By image analysis, color parameters in the CIELab system, opacity, Whiteness and Yellowness Index were described. The microstructure was described by scanning electron microscopy. The hedonic evaluation revealed that the addition of nanometals and their increasing concentration caused a deterioration in sample acceptability. The overall evaluation was higher than 5 in 50% of the samples containing nanometals. The addition of nanometals also caused statistically significant changes in L*, a*, and b* values. The sample transparency generally decreased with the increasing concentration of nanoparticle addition. Scanning electron microscopy showed, that the addition of nanometals does not disrupt the protective function of the packaging. From a sensory point of view, the addition of ZnO nanoparticles in concentrations of 0.05 and 0.2% appeared to be the most favorable of all nanometals.

Acceptability Analysis of 3D-Printed Food in the Area of the Czech Republic Based on Survey.

The aim of the research was to observe consumer perceptions of 3D food printing and to highlight possible applications of this production. The questionnaire survey took place in the Czech Republic and was attended by 1156 respondents. The questionnaire was divided into six sections: (1) Socio-Demographic Data; (2) 3D Common Printing Awareness; (3) 3D Food Printing Awareness; (4) 3D Food Printing, Worries and Understanding; (5) Application; (6) Investments. Although awareness of 3D food printing is increasing, a very small fraction of respondents had encountered printed food in person (1.5%; n = 17). Respondents expressed concerns about the health benefits and the reduced prices of novel foods, and they perceived printed foods as ultra-processed foods (56.0%; n = 647). Concerns have also been raised about job losses due to the introduction of new technology. On the contrary, they perceived that quality raw materials would be used to prepare printed foods (52.4%; n = 606). Most respondents believed that printed foods would be visually appealing and would find application in several food industry sectors. Most respondents believed that 3D food printing is the future of the food sector (83.8%; n = 969). The gained results can be helpful for 3D food printer producers, as well as for future experiments dealing with 3D food printing issues.

Incorporation of Natural Blueberry, Red Grapes and Parsley Extract By-Products into the Production of Chitosan Edible Films.

The aim of the research was to produce edible packaging based on chitosan with the addition of various concentrations of extracts of blueberry, red grape and parsley marcs. Packaging was made from extrudate extracts, which were subsequently analyzed by physicochemical methods: zeta-potential, gas barrier properties, thickness, water content, solubility, swelling degree, textural properties, total polyphenol content (TPC), polyphenols by high pressure liquid chromatography (HPLC), antioxidant activity, attenuated total reflectance Fourier-Transform spectroscopy (FTIR), antimicrobial activity and determination of migration of bioactive substances. The results indicate that a higher content of plant extracts have a statistically significant (p < 0.05) influence on properties of experimentally produced edible films. Edible films produced with the highest concentrations of red grapes marc extracts showed the most advantageous properties since antimicrobial activity against E. coli were the highest in this kind of produced film. The physical properties of edible films were also improved by the addition of extracts; gas permeability toward oxygen can be defined as advantageous, as can swelling degree, which decreased with higher concentrations of extracts. The research emphasized the possibility to use plant foodstuffs by-products in the production of edible/biodegradable films, helping in the overall sustainability and eco-friendliness of food/package production.

Active Edible Films Fortified with Natural Extracts: Case Study with Fresh-Cut Apple Pieces.

The main aim of the study was to prepare the edible films based on carrageenan/chitosan and incorporate them into the following matrices: the natural extracts of Clitoria ternatea, Brassica oleracea, and Ipomea batatas. The films were characterized by TPC (total polyphenols content), antioxidant activity, and textural properties. Experimentally produced films were added in the packaging of freshly cut apple pieces, and the apple pieces were dipped into the films produced from carrageenan and chitosan. The appearance of the samples was monitored, as were antioxidant activity and total polyphenol content. The intelligent properties of films were evaluated too. The polymer type used for the preparation had the highest impact on the prepared films, and CHLCZ (red cabbage extract-Brassica oleracea) featured the best antioxidant activity. The intelligent properties were slightly confirmed in samples with the addition of red cabbage. The main finding was that the coating of fresh-cut apples emphasized the possibility to use a carrageenan matrix with the addition of extracts. The samples immersed in this coating type showed higher antioxidant activity as well as a superior color when compared to that of chitosan coated apple samples.

Identification of pollen taxa by different microscopy techniques.

Melissopalynology is an important analytical method to identify botanical origin of honey. Pollen grain recognition is commonly performed by visual inspection by a trained person. An alternative method for visual inspection is automated pollen analysis based on the image analysis technique. Image analysis transfers visual information to mathematical descriptions. In this work, the suitability of three microscopic techniques for automatic analysis of pollen grains was studied. 2D and 3D morphological characteristics, textural and colour features, and extended depth of focus characteristics were used for the pollen discrimination. In this study, 7 botanical taxa and a total of 2482 pollen grains were evaluated. The highest correct classification rate of 93.05% was achieved using the phase contrast microscopy, followed by the dark field microscopy reaching 91.02%, and finally by the light field microscopy reaching 88.88%. The most significant discriminant characteristics were morphological (2D and 3D) and colour characteristics. Our results confirm the potential of using automatic pollen analysis to discriminate pollen taxa in honey. This work provides the basis for further research where the taxa dataset will be increased, and new descriptors will be studied.

Plastic Cutlery Alternative: Case Study with Biodegradable Spoons.

Plastics are mixtures of organic polymers that play a major role in environmental contamination worldwide. One way to reduce the waste arising from the use of plastics, especially disposable ones, can be to produce environmentally friendly cutlery. The aim of the work was the production of biodegradable spoons and evaluation of their texture, antioxidant activities and total polyphenols content. The spoons were made from a combination of the following ingredients: water, grape, proso millet, wheat, xanthan and palm oil in different concentrations. The samples were baked at 180 or 240 °C, some spoons were dried in a fruit dehydrator. According to the results of the analysis, a spoon prepared from a mixture of all three flours and with the addition of xanthan appears to be the most suitable replacement for plastic cutlery. This spoon showed high strength and antioxidant activity. It was confirmed that the use of grape flour has a beneficial effect on the nutritional profile of the experimentally produced biodegradable spoons.

Plant Byproducts as Part of Edible Coatings: A Case Study with Parsley, Grape and Blueberry Pomace.

Studies dealing with the development of edible/biodegradable packaging have been gaining popularity since these commodities are marked as being ecofriendly, especially when byproducts are incorporated. Consequently, this study aimed at the development of chitosan-based coatings with plant byproducts. Their sensory properties, colour attributes, occurrence of cracks in microstructure and biodegradability were analysed. Coatings containing grape and blueberry pomace had statistically significantly (p < 0.05) higher levels of colour intensity. Coating samples were characterised by lower aroma intensity (3.46-4.77), relatively smooth surface (2.40-5.86), and low stickiness (2.11-3.14). In the overall hedonic evaluation, the samples containing parsley pomace in all concentrations and a sample containing 5% grape pomace achieved a statistically significantly (p < 0.05) better evaluation (5.76-5.93). The lowest values of the parameter ΔE2000 were recorded for the sample containing 5% parsley pomace (3.5); the highest was for the sample with 20% blueberry pomace (39.3). An analysis of the coating surface microstructure showed the presence of surface cracks at an 80 K magnification but the protective function of the edible coating was not disrupted by the added plant pomace. The produced samples can be considered to have a high biodegradability rate. The results of our experimentally produced coatings indicate their possible application on a commercial scale.

Influence of Technological Maturity on the Secondary Metabolites of Hemp Concentrate (Cannabis sativa L.).

During the last decade, the popularity of hemp products has been rising rapidly. Products containing cannabidiol (CBD) are of predominant interest. Traditional hemp products are frequently enriched by CBD due to their potential therapeutic effects. Cannabidiol occurs naturally in hemp juice together with other biologically active substances, such as terpenes, flavonoids, and stilbenoids. These constituents act synergistically. This study aimed to observe the influence of the hemp plant developmental stage on its chemical composition and antioxidant activity. The hemp plants were analyzed during three vegetative stages, i.e., before, during, and after flowering. The collected samples were evaluated using the following analyses: total polyphenolic content and profile, terpenoid and cannabinoid contents, and ferric reducing antioxidant power. The results revealed statistically significant differences between the samples in almost all set parameters. The optimal period for hemp harvest depends on desirable compounds, i.e., phenolic content is the highest before flowering, while the levels of cannabinoids and terpenoids are the highest during the flowering period.

Detection of Carrageenan in Meat Products Using Lectin Histochemistry.

Carrageenan is a polysaccharide that is widely used in the food industry. Due to its water holding capacity, there is a higher risk of adulteration for economic reasons related to it. A verifiable method for detecting carrageenan is still missing in the food inspection sector. The detection of carrageenan in meat products is not well described. Our study describes lectin histochemistry as a novel approach for carrageenan detection. Within this study, the detection of carrageenan in meat products by lectin histochemistry is validated. Lectins of Arachis hypogaea (PNA) and Bandeiraea simlicifolia (BSA), specific for galactose units of carrageenan, were used. The samples included model meat products (ground chicken-meat products) and meat products from retail markets (chicken and pork hams, sausages, salami, and dried sausages). The limit of determination (LoD) of this method was set at 0.01 g kg-1. The method sensitivity for lectin PNA reached 1, and, for lectin BSA, it reached 0.96. Method specificity for lectin PNA was 1, and, for lectin BSA, it was 1.33. Cross-reactivity with other hydrocolloids tested was not confirmed. The results confirm that lectin histochemistry is suitable for detecting carrageenan in meat products.

Development of Immunohistochemical Methods for Casein Detection in Meat Products.

To increase production efficiency of meat products, milk protein additives are often used. Despite a number of advantages, use of dairy ingredients involves a certain risk, namely the allergenic potential of milk proteins. A number of methods have been developed to detect milk-origin raw materials in foodstuffs, including immunological reference methods. This study presents newly developed immunohistochemical (IHC) methods for casein detection in meat products. Casein was successfully detected directly in meat products where sensitivity was determined at 1.21 and specificity at 0.28. The results obtained from the IHC were compared with the Enzyme-Linked Immuno Sorbent Assay (ELISA) and there was no statistically significant difference between the IHC and ELISA methods (p > 0.05). The correspondence between the methods was 72% in total. The highest correspondence was reached in frankfurters (90%), the lowest in canned pâté (44%).

Grape Pomace Valorization: A Systematic Review and Meta-Analysis.

This systematic review aimed to collect data and analyze the possible use of grape pomace, a winemaking industry byproduct, in the production of fortified foods. The English articles found in Web of Science, Scopus, and Google Scholar, from January 2006 until May 2020, were used for the conduction of overview tables and meta-analysis. The systematic review emphasized the two main issues concerning grape pomace application to other food products: (i) grape pomace contains high amounts of health promoting compounds; and (ii) the use of grape pomace is influencing the waste management. The grape pomace has been used in the fortification of plant origin food, meat, fish, and dairy products, mainly due to higher polyphenols and dietary fiber contents. The fortification was declared as successful in all studied food types. The change of color, caused by polyphenolic compounds, was mainly observed as an adverse effect of the fortification. Higher levels of fortification also caused notable undesirable changes in texture. The most valuable influence of the grape pomace addition according to included papers and meta-analysis is certainly a higher nutritional quality and oxidative stability of fortified products, reflected as higher polyphenol and total dietary fiber content.

Apple pomace as food fortification ingredient: A systematic review and meta-analysis.

The present review aimed to investigate and analyze the use of byproduct apple pomace as a fortification ingredient in different types of foods. The data obtained from English published articles found on Web of Science, Scopus, and Google Scholar in the period from 2007 to 2019 were used for making the table overview and meta-analysis of results described in those studies. The systematic review confirmed the importance of apple pomace use in the food industry due to the beneficial nutritional profile and ecological issue (waste management). The main attributes of apple pomace are high content of antioxidant compounds and dietary fibers. Dietary fibers from apple pomace significantly increased total fiber content in enriched products-meaning that the transfer of the fortification can be declared health beneficial. The conducted meta-analysis showed unambiguously the different influence of apple pomace addition according to fortified food commodity. The fortification drawbacks were noticeable in plant food products because darker and brownish color was not evaluated positively by panelists. Oppositely, color, as one of the main sensory characteristics, was beneficially affected in animal origin food. The sensory properties, including color, play an important role in product acceptance by consumers. Besides color, animal origin products fortified by apple pomace showed the most acceptable textural properties and oxidative stability.

Assessment of the Effect of Secondary Fixation on the Structure of Meat Products Prepared for Scanning Electron Microscopy.

The aim of the research was to verify the necessity of secondary fixation with osmium tetroxide in various types of meat products and evaluation of structural changes of products using different fixation procedures. The material for the study consisted of 11 types of meat products that were analyzed using a scanning electron microscope (SEM) with two different methods of chemical fixation. The first method included the usual processing of biological samples: glutaraldehyde primary fixation, the use of a buffer, secondary fixation by osmium tetroxide (OsO4), buffer, and dehydration using ethanol of increasing concentrations. The second method comprised the glutaraldehyde primary fixation and dehydration using the ethanol of increasing concentrations only. The results unambiguously suggest that the main difference between these methods is in fixation and visibility of fat. Our analysis principally suggests that fixation of the product with OsO4 allows the tracking of all components (fat droplets, muscle fibers, connective tissue) in meat products. At the same time, our results also support the possibility that the secondary fixation can be skipped during the analysis, where the main objection is an observation of lipid-free structures of the meat products (e.g., connection between muscle and starches or spices) or meat products with an insignificant amount of fat.

Chemical and Physical Characteristics of Edible Films, Based on κ- and ι-Carrageenans with the Addition of Lapacho Tea Extract.

The aim of the study was to characterize antioxidant and textural property differences of edible films prepared with the addition of lapacho extract (LE). The experimentally produced edible films also contained different carrageenans (ι- and κ-carrageenan). The κ- and ι-carrageenan, glycerol and the different addition of LE (5%, 10%, 20%) were used as ingredients for forming films. The pH and viscosity were measured for film forming solutions (before drying). The following analyses were performed on films: the total polyphenol content (TPC), Ferric Reducing Antioxidant Power (FRAP) and 2-Diphenyl-1-Picrylhydrazyl (DPPH). Optical parameters were analyzed by the determination of UV-Vis spectra. The structure of films was characterized by scanning electron microscopy. The gained results indicated that the use of different gelling agents (ι- and κ-carrageenan) resulted in statistically significant (p < 0.05) differences in textural properties (strength and breaking strain) of produced edible films. The highest antioxidant properties and TPC had a κ film with 20% LE (DPPH: 87.63 ± 0.03%; TPC: 233.75 ± 0.104 mg gallic acid/g). According to these results, it can be concluded that edible films with the highest concentrations of added lapacho extract can serve as a good source of antioxidant compounds. Certainly, these properties can be usefully incorporated into the wrapped food commodity.

Use of IHF-QD Microscopic Analysis for the Detection of Food Allergenic Components: Peanuts and Wheat Protein.

The aim of the study was to analytically evaluate quantum dots in immunohistofluorescence (IHF-QD) microscopic imaging as detectors of food allergens-peanut and wheat. The experiment was designed as two in silico experiments or simulations: (a) models of pastry samples were prepared with the addition of allergenic components (peanut and wheat protein components) and without the addition of allergenic components, and (b) positive and negative commercial samples underwent food allergen detection. The samples from both simulations were tested by the ELISA and IHF-QD microscopic methods. The primary antibodies (secondary antibodies to a rabbit Fc fragment with labeled CdSe/ZnS QD) were labelled at 525, 585, and 655 nm emissions. The use of quantum dots (QDs) has expanded to many science areas and they are also finding use in food allergen detection, as shown in the study. The study indicated that differences between the ELISA and IHF-QD microscopic methods were not observable among experimentally produced pastry samples with and without allergenic components, although differences were observed among commercial samples. The important value of the study is certainly the differences found in the application of different QD conjugates (525, 585, and 655). The highest contrast was found in the application of 585 QD conjugates that can serve for the possible quantification of present food allergens-peanuts and wheat. The study clearly emphasized that QD can be used for the qualitative detection of food allergens and can represent a reliable analytical method for food allergen detection in different food matrixes.