Experimental investigations of seeding mechanisms of TMI in rod fiber amplifier using spatially and temporally resolved imaging.

In this work we investigate transverse mode instability (TMI) in the presence of pump intensity noise and a controlled perturbation of the input coupling for a rod-type fiber amplifier using spatially and temporally resolved imaging (ST). We show that inherent pump intensity noise from the power supply can define significant peaks in the resulting TMI spectrum. ST measurements show that the TMI in the transition region consists of different orientations of LP11. This finding indicates that the simple picture of TMI being seeded by the combination of a static initial fraction of LP11 and pump or signal intensity noise is not valid for our measurements. Furthermore we present seeding of TMI by perturbing the input coupling dynamically. ST measurements of the resulting TMI as a function of perturbation frequency provides quantitative information regarding the frequency response of the non-linear coupling coefficient. Finally, ST measurements of the resulting TMI as a function of signal power shows that the TMI experiences an exponential gain long before visible beam fluctuations appear.

Compact, CO2-stabilized tuneable laser at 2.05 microns.

We demonstrate a compact fibre-based laser system at 2.05 microns stabilized to a CO2 transition using frequency modulation spectroscopy of a gas-filled hollow-core fibre. The laser exhibits an absolute frequency accuracy of 5 MHz, a frequency stability noise floor of better than 7 kHz or 5 × 10-11 and is tunable within ±200 MHz from the molecular resonance frequency while retaining roughly this stability and accuracy.

Optical frequency standard using acetylene-filled hollow-core photonic crystal fibers.

Gas-filled hollow-core photonic crystal fibers are used to stabilize a fiber laser to the 13C2H2 P(16) (ν1+ν3) transition at 1542 nm using saturated absorption. Four hollow-core fibers with different crystal structure are compared in terms of long term lock-point repeatability and fractional frequency instability. The locked fiber laser shows a fractional frequency instability below 4 × 10(-12) for averaging time up to 10(4) s. The lock-point repeatability over more than 1 year is 1.3 × 10(-11), corresponding to a standard deviation of 2.5 kHz. A complete experimental investigation of the light-matter interaction between the spatial modes excited in the fibers and the frequency of the locked laser is presented. A simple theoretical model that explains the interaction is also developed.