Harvesting singlet fission for solar energy conversion via triplet energy transfer.

The efficiency of a conventional solar cell may be enhanced if one incorporates a molecular material capable of singlet fission, that is, the production of two triplet excitons from the absorption of a single photon. To implement this, we need to successfully harvest the two triplets from the singlet fission material. Here we show in the tetracene (Tc)/copper phthalocyanine (CuPc) model system that triplets produced from singlet fission in the former can transfer to the later on the timescale of 45±5 ps. However, the efficiency of triplet energy transfer is limited by a loss channel due to faster formation (400±100 fs) and recombination (2.6±0.5 ps) of charge transfer excitons at the interface. These findings suggest a design principle for efficient energy harvesting from singlet fission: one must reduce interfacial area between the two organic chromophores to minimize charge transfer/recombination while optimizing light absorption, singlet fission and triplet rather than singlet transfer.

The quantum coherent mechanism for singlet fission: experiment and theory.

The absorption of one photon by a semiconductor material usually creates one electron-hole pair. However, this general rule breaks down in a few organic semiconductors, such as pentacene and tetracene, where one photon absorption may result in two electron-hole pairs. This process, where a singlet exciton transforms to two triplet excitons, can have quantum yields as high as 200%. Singlet fission may be useful to solar cell technologies to increase the power conversion efficiency beyond the so-called Shockley-Queisser limit. Through time-resolved two-photon photoemission (TR-2PPE) spectroscopy in crystalline pentacene and tetracene, our lab has recently provided the first spectroscopic signatures in singlet fission of a critical intermediate known as the multiexciton state (also called a correlated triplet pair). More importantly, we found that population of the multiexciton state rises at the same time as the singlet state on the ultrafast time scale upon photoexcitation. This observation does not fit with the traditional view of singlet fission involving the incoherent conversion of a singlet to a triplet pair. However, it provides an experimental foundation for a quantum coherent mechanism in which the electronic coupling creates a quantum superposition of the singlet and the multiexciton state immediately after optical excitation. In this Account, we review key experimental findings from TR-2PPE experiments and present a theoretical analysis of the quantum coherent mechanism based on electronic structural and density matrix calculations for crystalline tetracene lattices. Using multistate density functional theory, we find that the direct electronic coupling between singlet and multiexciton states is too weak to explain the experimental observation. Instead, indirect coupling via charge transfer intermediate states is two orders of magnitude stronger, and dominates the dynamics for ultrafast multiexciton formation. Density matrix calculation for the crystalline tetracene lattice satisfactorily accounts for the experimental observations. It also reveals the critical roles of the charge transfer states and the high dephasing rates in ensuring the ultrafast formation of multiexciton states. In addition, we address the origins of microscopic relaxation and dephasing rates, and adopt these rates in a quantum master equation description. We show the need to take the theoretical effort one step further in the near future by combining high-level electronic structure calculations with accurate quantum relaxation dynamics for large systems.

Hot charge-transfer excitons set the time limit for charge separation at donor/acceptor interfaces in organic photovoltaics.

Photocurrent generation in organic photovoltaics (OPVs) relies on the dissociation of excitons into free electrons and holes at donor/acceptor heterointerfaces. The low dielectric constant of organic semiconductors leads to strong Coulomb interactions between electron-hole pairs that should in principle oppose the generation of free charges. The exact mechanism by which electrons and holes overcome this Coulomb trapping is still unsolved, but increasing evidence points to the critical role of hot charge-transfer (CT) excitons in assisting this process. Here we provide a real-time view of hot CT exciton formation and relaxation using femtosecond nonlinear optical spectroscopies and non-adiabatic mixed quantum mechanics/molecular mechanics simulations in the phthalocyanine-fullerene model OPV system. For initial excitation on phthalocyanine, hot CT excitons are formed in 10(-13) s, followed by relaxation to lower energies and shorter electron-hole distances on a 10(-12) s timescale. This hot CT exciton cooling process and collapse of charge separation sets the fundamental time limit for competitive charge separation channels that lead to efficient photocurrent generation.

Harvesting singlet fission for solar energy conversion: one- versus two-electron transfer from the quantum mechanical superposition.

Singlet fission, the creation of two triplet excitons from one singlet exciton, is being explored to increase the efficiency of solar cells and photo detectors based on organic semiconductors, such as pentacene and tetracene. A key question is how to extract multiple electron-hole pairs from multiple excitons. Recent experiments in our laboratory on the pentacene/C(60) system (Chan, W.-L.; et al. Science 2011, 334, 1543-1547) provided preliminary evidence for the extraction of two electrons from the multiexciton (ME) state resulting from singlet fission. The efficiency of multielectron transfer is expected to depend critically on other dynamic processes available to the singlet (S(1)) and the ME, but little is known about these competing channels. Here we apply time-resolved photoemission spectroscopy to the tetracene/C(60) interface to probe one- and two-electron transfer from S(1) and ME states, respectively. Unlike ultrafast (~100 fs) singlet fission in pentacene where two-electron transfer from the multiexciton state resulting from singlet fission dominates, the relatively slow (~7 ps) singlet fission in tetracene allows both one- and two-electron transfer from the S(1) and the ME states that are in a quantum mechanical superposition. We show evidence for the formation of two distinct charge transfer states due to electron transfer from photoexcited tetracene to the lowest unoccupied molecular orbital (LUMO) and the LUMO+1 levels in C(60), respectively. Kinetic analysis shows that ~60% of the S(1) ⇔ ME quantum superposition transfers one electron through the S(1) state to C(60) while ~40% undergoes two-electron transfer through the ME state. We discuss design principles at donor/acceptor interfaces for optimal multiple carrier extraction from singlet fission for solar energy conversion.

Understanding the Interface Dipole of Copper Phthalocyanine (CuPc)/C60: Theory and Experiment.

Interface dipole determines the electronic energy alignment in donor/acceptor interfaces and plays an important role in organic photovoltaics. Here we present a study combining first principles density functional theory (DFT) with ultraviolet photoemission spectroscopy (UPS) and time-of-flight secondary ion mass spectrometry (TOF-SIMS) to investigate the interface dipole, energy level alignment, and structural properties at the interface between CuPc and C60. DFT finds a sizable interface dipole for the face-on orientation, in quantitative agreement with the UPS measurement, and rules out charge transfer as the origin of the interface dipole. Using TOF-SIMS, we show that the interfacial morphology for the bilayer CuPc/C60 film is characterized by molecular intermixing, containing both the face-on and the edge-on orientation. The complementary experimental and theoretical results provide both insight into the origin of the interface dipole and direct evidence for the effect of interfacial morphology on the interface dipole.

Communication: Momentum-resolved quantum interference in optically excited surface states.

Surface states play essential roles in condensed matter physics, e.g., as model two-dimensional (2D) electron gases and as the basis for topological insulators. Here, we demonstrate quantum interference in the optical excitation of 2D surface states using the model system of C(60)/Au(111). These surface states are transiently populated and probed in a femtosecond time- and angle-resolved two-photon photoemission experiment. We observe quantum interference within the excited populations of these surface states as a function of parallel momentum vector. Such quantum interference in momentum space may allow one to control 2D transport properties by optical fields.

Spectral and thermodynamic properties of Ag(I), Au(III), Cd(II), Co(II), Fe(III), Hg(II), Mn(II), Ni(II), Pb(II), U(IV), and Zn(II) binding by methanobactin from Methylosinus trichosporium OB3b.

Methanobactin (mb) is a novel chromopeptide that appears to function as the extracellular component of a copper acquisition system in methanotrophic bacteria. To examine this potential physiological role, and to distinguish it from iron binding siderophores, the spectral (UV-visible absorption, circular dichroism, fluorescence, and X-ray photoelectron) and thermodynamic properties of metal binding by mb were examined. In the absence of Cu(II) or Cu(I), mb will bind Ag(I), Au(III), Co(II), Cd(II), Fe(III), Hg(II), Mn(II), Ni(II), Pb(II), U(VI), or Zn(II), but not Ba(II), Ca(II), La(II), Mg(II), and Sr(II). The results suggest metals such as Ag(I), Au(III), Hg(II), Pb(II) and possibly U(VI) are bound by a mechanism similar to Cu, whereas the coordination of Co(II), Cd(II), Fe(III), Mn(II), Ni(II) and Zn(II) by mb differs from Cu(II). Consistent with its role as a copper-binding compound or chalkophore, the binding constants of all the metals examined were less than those observed with Cu(II) and copper displaced other metals except Ag(I) and Au(III) bound to mb. However, the binding of different metals by mb suggests that methanotrophic activity also may play a role in either the solubilization or immobilization of many metals in situ.