Annealing effects on the magnetic and magnetotransport properties of iron oxide nanoparticles self-assemblies.

In magnetic tunnel junctions based on iron oxide nanoparticles the disorder and the oxidation state of the surface spin as well as the nanoparticles functionalization play a crucial role in the magnetotransport properties. In this work, we report a systematic study of the effects of vacuum annealing on the structural, magnetic and transport properties of self-assembled ∼10 nm Fe3O4nanoparticles. The high temperature treatment (from 573 to 873 K) decomposes the organic coating into amorphous carbon, reducing the electrical resistivity of the assemblies by 4 orders of magnitude. At the same time, the 3.Fe2+/(Fe3++Fe2+) ratio is reduced from 1.11 to 0.13 when the annealing temperature of the sample increases from 573 to 873 K, indicating an important surface oxidation. Although the 2 nm physical gap remains unchanged with the thermal treatment, a monotonous decrease of tunnel barrier width was obtained from the electron transport measurements when the annealing temperature increases, indicating an increment in the number of defects and hot-spots in the gap between the nanoparticles. This is reflected in the reduction of the spin dependent tunneling, which reduces the interparticle magnetoresistance. This work shows new insights about influence of the nanoparticle interfacial composition, as well their the spatial arrangement, on the tunnel transport of self-assemblies, and evidence the importance of optimizing the nanostructure fabrication for increasing the tunneling current without degrading the spin polarized current.

Copper, zinc, and chromium accumulation in aquatic macrophytes from a highly polluted river of Argentina.

The aims of this study were to assess Cu, Zn, and Cr pollution in a highly polluted river in Argentina (Matanza-Riachuelo) and to evaluate tolerance strategies and toxic effects in aquatic macrophytes. Chemical techniques were used to assess the bioavailability of these metals and to evaluate their uptake and translocation by plants. The ultrastructure of the roots of a free-floating plant (Eichhornia crassipes) and the leaves of an emergent macrophyte (Sagittaria montevidensis) was examined using transmission electron microscopy. In the lower basin of the river, the highest concentrations of total heavy metals were detected in water (179 µgZn/g; 54 µgCu/g; 240 µgCr/g) and sediments (1499 µgZn/g; 393 µgCu/g; 4886 µgCr/g). In the upper basin of the river, low percentages of Zn and Cu (8 to 25%) were extracted with DTPA and EDTA, probably due to the lithogenic origin of these metals. Higher extraction percentages (24 to 66%) were obtained in the lower basin, in accordance with anthropogenic pollution. For Cr, extraction percentages were low in the upper basin of the river (< 4.5%) and extremely low in the lower basin (< 0.03%). In S. montevidensis, the BCF (bioconcentration factor) and TF (translocation factor) indexes were compatible with heavy metal exclusion mechanisms in sediments, whereas in the E. crassipes, root compartmentalization could be the main tolerance strategy. The leaves of S. montevidensis showed no evidence of damage, whereas ultrastructural alterations (plasmolyzed cells, disorganized membranes) were observed in E. crassipes.

Adjusting the Néel relaxation time of Fe3O4/Zn x Co1-x Fe2O4 core/shell nanoparticles for optimal heat generation in magnetic hyperthermia.

In this work it is shown a precise way to optimize the heat generation in high viscosity magnetic colloids, by adjusting the Néel relaxation time in core/shell bimagnetic nanoparticles, for magnetic fluid hyperthermia (MFH) applications. To pursue this goal, Fe3O4/Zn x Co1-x Fe2O4 core/shell nanoparticles were synthesized with 8.5 nm mean core diameter, encapsulated in a shell of ∼1.1 nm of thickness, where the Zn atomic ratio (Zn/(Zn + Co) at%) changes from 33 to 68 at%. The magnetic measurements are consistent with a rigid interface coupling between the core and shell phases, where the effective magnetic anisotropy systematically decreases when the Zn concentration increases, without a significant change of the saturation magnetization. Experiments of MFH of 0.1 wt% of these particles dispersed in water, in Dulbecco modified Eagles minimal essential medium, and a high viscosity butter oil, result in a large specific loss power (SLP), up to 150 W g-1, when the experiments are performed at 571 kHz and 200 Oe. The SLP was optimized adjusting the shell composition, showing a maximum for intermediate Zn concentration. This study shows a way to maximize the heat generation in viscous media like cytosol, for those biomedical applications that require smaller particle sizes.

Adjusting the Néel relaxation time of Fe3O4/ZnxCo1-xFe2O4 core/shell nanoparticles for optimal heat generation in magnetic hyperthermia.

In this work it is shown a precise way to optimize the heat generation in high viscosity magnetic colloids, by adjusting the Néel relaxation time in core/shell bimagnetic nanoparticles, for Magnetic Fluid Hyperthermia applications. To pursue this goal, Fe3O4/ZnxCo1-xFe2O4 core/shell nanoparticles were synthesized with 8.5 nm mean core diameter, encapsulated in a shell of ~1.1 nm of thickness, where the Zn atomic ratio (Zn/(Zn+Co) at%) changes from 33 at% to 68 at%. The magnetic measurements are consistent with a rigid interface coupling between the core and shell phases, where the effective magnetic anisotropy systematically decreases when the Zn concentration increases, without a significant change of the saturation magnetization. Experiments of magnetic fluid hyperthermia of 0.1 wt% of these particles dispersed in water, DMEM (Dulbecco modified Eagles minimal essential medium) and a high viscosity butter oil, result in a large specific loss power (SLP), up to 150 W/g, when the experiments are performed at 571 kHz and 200 Oe. The SLP was optimized adjusting the shell composition, showing a maximum for intermediate Zn concentration. This study shows a way to maximize the heat generation in viscous media like cytosol, for those biomedical applications that requiere smaller particle sizes .

Controlling the dominant magnetic relaxation mechanisms for magnetic hyperthermia in bimagnetic core-shell nanoparticles.

We report a simple and effective way to control the heat generation of a magnetic colloid under alternate magnetic fields by changing the shell composition of bimagnetic core-shell Fe3O4/ZnxCo1-xFe2O4 nanoparticles. The core-shell structure constitutes a magnetically-coupled biphase system, with an effective anisotropy that can be tuned by the substitution of Co2+ by Zn2+ ions in the shell. Magnetic hyperthermia experiments of nanoparticles dispersed in hexane and butter oil showed that the magnetic relaxation is dominated by Brown relaxation mechanism in samples with higher anisotropy (i.e., larger concentration of Co within the shell) yielding high specific power absorption values in low viscosity media as hexane. Increasing the Zn concentration of the shell, diminishes the magnetic anisotropy, which results in a change to a Néel relaxation that dominates the process when the nanoparticles are dispersed in a high-viscosity medium. We demonstrate that tuning the Zn contents at the shell of these exchange-coupled core/shell nanoparticles provides a way to control the magnetic anisotropy without loss of saturation magnetization. This ability is an essential prerequisite for most biomedical applications, where high viscosities and capturing mechanisms are present.

Tuning the coercivity and exchange bias by controlling the interface coupling in bimagnetic core/shell nanoparticles.

In order to explore an alternative strategy to design exchange-biased magnetic nanostructures, bimagnetic core/shell nanoparticles have been fabricated by a thermal decomposition method and systematically studied as a function of the interface exchange coupling. The nanoparticles are constituted by a ∼3 nm antiferromagnetic (AFM) CoO core encapsulated in a ∼4 nm-thick Co1-xZnxFe2O4 (x = 0-1) ferrimagnetic (FiM) shell. The system presents an enhancement of the coercivity (HC) as compared to its FiM single-phase counterpart and exchange bias fields (HEB). While HC decreases monotonically with the Zn concentration from ∼21.5 kOe for x = 0, to ∼7.1 kOe for x = 1, HEB exhibits a non-monotonous behavior being maximum, HEB ∼ 1.4 kOe, for intermediate concentrations. We found that the relationship between the AFM anisotropy energy and the exchange coupling energy can be tuned by replacing Co2+ with Zn2+ ions in the shell. As a consequence, the magnetization reversal mechanism of the system is changed from an AFM/FiM rigid-coupling regime to an exchange-biased regime, providing a new approach to tune the magnetic properties and to design novel hybrid nanostructures.

Magnetic Gold Confined in Ordered Mesoporous Titania Thin Films: A Noble Approach for Magnetic Devices.

In the past decade, the surprising magnetic behavior of gold nanoparticles has been reported. This unexpected property is mainly attributed both to size and surface effects. Mesoporous thin films are ideal matrices for metallic nanoparticles inclusion, because of their highly accessible and tailorable pore systems that lead to completely tunable chemical environments. Exploiting these features, we synthesized Au nanoparticles within mesoporous titania thin films (film thickness of ∼150 nm and pore diameter of ∼5 nm), and we studied their magnetic properties under confinement. Here, we present the results of the magnetization as a function of temperature and magnetic field for this system, which are consistent with the previously reported for free (unconfined) thiol-capped gold nanoparticles. The successful inclusion of stable magnetic Au nanoparticles within transparent mesoporous thin films opens the gates for the application of these nanocomposites in two-dimensional (2D) microdevices technology and magneto-optical devices.

Superparamagnetic iron-oxide nanoparticles mPEG350- and mPEG2000-coated: cell uptake and biocompatibility evaluation.

Superparamagnetic iron oxide nanoparticles (SPIONS) were synthesized by thermal decomposition of an organometallic precursor at high temperature and coated with a bi-layer composed of oleic acid and methoxy-polyethylene glycol-phospholipid. The formulations were named SPION-PEG350 and SPION-PEG2000. Transmission electron microscopy, X-ray diffraction and magnetic measurements show that the SPIONs are near-spherical, well-crystalline, and have high saturation magnetization and susceptibility. FTIR spectroscopy identifies the presence of oleic acid and of the conjugates mPEG for each sample. In vitro biocompatibility of SPIONS was investigated using three cell lines; up to 100µg/ml SPION-PEG350 showed non-toxicity, while SPION-PEG2000 showed no signal of toxicity even up to 200µg/ml. The uptake of SPIONS was detected using magnetization measurement, confocal and atomic force microscopy. SPION-PEG2000 presented the highest internalization capacity, which should be correlated with the mPEG chain size. The in vivo results suggested that SPION-PEG2000 administration in mice triggered liver and kidney injury. FROM THE CLINICAL EDITOR: The potential use of superparamagnetic iron oxide nanoparticles (SPIONS) in the clinical setting have been studied by many researchers. The authors synthesized two types of SPIONS here and investigated the physical properties and biological compatibility. The findings should provide more data on the design of SPIONS for clinical application in the future.

Size effects in bimagnetic CoO/CoFe2O4 core/shell nanoparticles.

The control of the size of bimagnetic nanoparticles represents an important step toward the study of fundamental properties and the design of new nanostructured magnetic materials. We report the synthesis and the structural and magnetic characterization of bimagnetic CoO/CoFe2O4 core/shell nanoparticles. The material was fabricated by a seed-mediated growth high-temperature decomposition method with sizes in the range of 5-11 nm. We show that the core/shell morphology favours the crystallinity of the shell phase, and the reduction of the particle size leads to a remarkable increase of the magnetic hardening. When the size is reduced, the coercive field at 5 K increases from 21.5 kOe to 30.8 kOe, while the blocking temperature decreases from 388 K to 167 K. The size effects on the magnetic behaviour are described through a phenomenological model for strongly ferri-/antiferromagnetic coupled phases.

Silver nanoparticle-mesoporous oxide nanocomposite thin films: a platform for spatially homogeneous SERS-active substrates with enhanced stability.

We introduce a nanoparticle-mesoporous oxide thin film composite (NP-MOTF) as low-cost and straightforward sensing platforms for surface-enhanced Raman Spectroscopy (SERS). Titania, zirconia, and silica mesoporous matrices templated with Pluronics F-127 were synthesized via evaporation-induced self-assembly and loaded with homogeneously dispersed Ag nanoparticles by soft reduction or photoreduction. Both methods give rise to uniform and reproducible Raman signals using 4-mercaptopyridine as a probe molecule. Details on stability and reproducibility of the Raman enhancement are discussed. Extensions in the design of these composite structures were explored including detection of nonthiolated molecules, such as rhodamine 6-G or salicylic acid, patterning techniques for locating the enhancement regions and bilayered mesoporous structures to provide additional control on the environment, and potential size-selective filtration. These inorganic oxide-metal composites stand as extremely simple, reproducible, and versatile platforms for Raman spectroscopy analysis.

Preparation of iron oxide nanoparticles stabilized with biomolecules: experimental and mechanistic issues.

Nanoparticles (NPs) with magnetic properties based on magnetite (Fe(3)O(4), MAG) modified with oleic acid (OA), chitosan (CS) and bovine serum albumin (BSA) have been prepared. A versatile method of synthesis was employed, involving two steps: (i) co-precipitation of MAG; and (ii) nanoprecipitation of macromolecules on as-formed MAG NPs. Experimental variables have been explored to determine the set of conditions that ensure suitable properties of NPs in terms of their size, functionality and magnetic properties. It was found that the presence of OA in Fe(+2)/Fe(+3) solutions yields MAG NPs with lower aggregation levels, while increasing initial amounts of OA may change the capability of NPs to disperse in aqueous or organic media by modifying the stabilization mechanism. Incorporation of CS was verified through Fourier transform IR spectroscopy. This biopolymer stabilizes NPs by electrostatic repulsions leading to stable ferrofluids and minimal fraction of recoverable solid NPs. BSA was successfully added to NP formulations, increasing their functionality and probably their biocompatibility. In this case too stable ferrofluids were obtained, where BSA acts as a polyelectrolyte. From the proposed methodology it is possible to achieve a wide range of NPs magnetically active intended for several applications. The required properties may be obtained by varying experimental conditions.

Nanostructured colloidal crystals from forced hydrolysis methods.

In this work, an original route for ZnO nanostructured spherical colloids and their assembly into colloidal crystals are presented. The temporal evolution of crystal size and shape was followed by X-ray diffraction and the colloids size distribution by scanning electron microscopy. These spherical colloids showed a change in their size dispersion with aging time. Early stage suspensions, with a narrow size distribution, were settled to the bottom and dried with a slow evaporation rate to obtain colloidal crystals. This original route provides a new material for future applications in opalline photonic crystals, with a dielectric constant higher than that of classical materials (silica and latex). Moreover, this route means an improvement of previously reported data from the literature since it involves a one-pot strategy and room-temperature colloid assembly.