Enhanced Performance of Carbon-Selenide Composite with La0.9Ce0.1NiO3 Perovskite Oxide for Outstanding Counter Electrodes in Platinum-Free Dye-Sensitized Solar Cells.

For large-scale applications, dye-sensitized solar cells (DSSCs) require the replacement of the scarce platinum (Pt)-based counter electrode (CE) with efficient and cheap alternatives. In this respect, low-cost perovskite oxides (ABO3) have been introduced as promising additives to composite-based CEs in Pt-free DSSCs. Herein, we synthesized composites from La0.9Ce0.1NiO3 (L) perovskite oxide and functionalized-multiwall-carbon-nanotubes wrapped in selenides derived from metal-organic-frameworks (f-MWCNT-ZnSe-CoSe2, "F"). L and F were then mixed with carbon black (CB) in different mass ratios to prepare L@CB, F@CB, and L@F@CB composites. The electrochemical analysis revealed that the L@F@CB composite with a mass ratio of 1.5:3:1.5 exhibits better electrocatalytic activity than Pt. In addition, the related DSSC reached a better PCE of 7.49% compared to its Pt-based counterpart (7.09%). This improved performance is the result of the increase in the oxygen vacancy by L due to the replacement of La with Ce in its structure, leading to more active sites in the L@F@CB composites. Moreover, the F@CB composite favors the contribution to the high electrical conductivity of the hybrid carbon nanotube-carbon black, which also offers good stability to the L@F@CB CE by not showing any obvious change in morphology and peak-to-peak separation even after 100 cyclic voltammetry cycles. Consequently, the corresponding L@F@CB-based device achieved enhanced stability. Our work demonstrates that L@F@CB composites with a low cost are excellent alternatives to Pt CE in DSSCs.

Health Risk Assessment of Heavy Metals (Pb, Cd, Hg) in Hydroalcoholic Gels of Abidjan, Côte d'Ivoire.

Despite the high consumption of hydroalcoholic gels worldwide and particularly in Côte d'Ivoire since the outbreak of the COVID-19 pandemic, very few studies have measured the heavy metal content and human exposure in this product. Thus, 30 samples from supermarkets in Abidjan, Côte d'Ivoire, were collected for the study of risk assessment of exposure to heavy metals contained in hydroalcoholic gels. This study consists of the characterization of the danger by calculating the carcinogenic and non-carcinogenic risk by skin contact. Almost all samples analysed contain trace of lead, cadmium and mercury but at concentrations below the Canadian limit in cosmetic products applied to the skin and below the US FDA limit as an impurity in colour additives used in cosmetic products. The mean values of chronic daily intake via dermal absorption (CDIdermal) for adults were found in the order of mercury > lead > cadmium. The health risk estimation indicated that the mean total hazard quotient for dermal adsorption (HIdermal) obtained is 7.10 × 10-5 ± 5.52 × 10-5. This value was below 1, the acceptable limit, representing a non-carcinogenic risk for Abidjan residents through dermal adsorption. Moreover, the incremental lifetime cancer risk (ILCR) evaluation for lead and cadmium was insignificant, and the cancer risk can be neglected, but in case of their overusing, they can cause long-term health problems for consumers.

Impact of municipal solid waste dumpsites on trace metal contamination levels in the surrounding area: a case study in West Africa, Abidjan, Cote d'Ivoire.

The impact of uncontrolled municipal dumping sites on metal contamination in the surrounding waters, sediments, and soils are of great concern in many developing countries. Total concentrations of trace metals Cd, Zn, Cu, Pb, Ni, and Co were measured in 33 sediments collected in the vicinity of the Akouedo dumpsite (Abidjan, Cote d'Ivoire) and in a baseline station. The Cu, Zn, Cd, and Pb concentrations in surface sediments around the dumpsite were at least three times higher than those at the reference station, suggesting that the Akouedo dumping site is a significant contamination source of these metals to the surrounding sediments. The extent of contamination affects sediment as deep as 100 cm. Sediment pH and total organic carbon content control the distribution of Cu, Zn, and Cd in subsurface sediments. Significant Cd, Zn, and Cu enrichments were measured at the dumpsite and its surrounding environment. Zn concentrations in the sediments might cause high ecological risks at 46% of the samples based on the sediment quality guidelines (SQGs). Single and sequential extraction results showed a low mobility rate of Cd, Cu, Pb, and Ni from sediments around the dumpsite. However, the results suggest that the high total metal concentrations in the dumpsite sediments have resulted in a significant metal load in the surrounding environment.

Trace metal(loid)s contamination in paddy rice (Oryza sativa L.) from wetlands near two gold mines in Côte d'Ivoire and health risk assessment.

This study examined the concentrations of arsenic (As), cadmium (Cd), and mercury (Hg) in rice grains grown in wetlands associated with gold mining in central-southern of Côte d'Ivoire to evaluate potential health risks exposure via rice consumption. In total, 30 rice grains were sampled around Agbaou and Bonikro gold mines. Arsenic and cadmium concentrations were determined using an inductively coupled plasma-optical emission spectrometer (ICP-OES), while atomic absorption spectrometry (AAS) was used for mercury. Results showed that As and Hg average concentrations in rice were above the permissible limits, while Cd average concentrations were below the permissible limit established by FAO/WHO in both sites. Except for Hg at Agbaou, no significant (p < 0.05) difference was found between trace metal concentrations in the two sites. The average daily intake (ADI) of As via rice consumption exceeded the USEPA reference dose (RfD) of 0.0003 µg g-1 day-1, indicating that rice ingestion is a pathway of As exposure for adults and children in the area. The average values of non-carcinogen (HQ) for As and carcinogen (CR) for As and Cd risks index suggest that potential health risks exist for both adults and children due to rice consumption at Agbaou and Bonikro. The maximum safe weekly consumption (MSWC) of rice relative to As, Cd, and Hg was estimated for the study area. Overall, this study provides strong evidence that As could threaten local population health in Côte d'Ivoire regions where gold mine extraction is occurring through rice ingestion.

Photocatalytic Degradation of Myclobutanil and Its Commercial Formulation with TiO2 P25 in Slurry and TiO2/ß-SiC Foams.

Viticulture is one of the crops most subject to pest control by fungicides. Their drainage towards the fresh water affects the aquatic environment, the fauna, the flora and especially the human health. It is therefore necessary to find an adequate solution to solve this problem. Heterogeneous photocatalysis is an advanced oxidation method for the degradation and mineralization of organic pollutants in water and air using semi-conductor (e.g., TiO²). TiO2 P25 in suspension (0.75 g·L-1) is used to treat Myclobutanil contaminated water and a commercial formulation Systhane™ 20EW, a fungicide produced by BASF. After 120 min of batch treatment under our conditions (pH = 6.7, Co = 10 mg ·L-1), 96% and 98% of Myclobutanil and Systhane were removed with 94% and 92% mineralization, respectively. In order to avoid the recovery of nanoparticles of TiO² P25 after treatment, we have taken care of ß-SiC foam cells. Under the same experimental conditions, 45% and 56% of Myclobutanil and Systhane degraded after 4 h with mineralization of 29% and 27%, respectively in recirculation in a fixed-light photoreactor by UV-A lamps. These results are very encouraging: filtering is not necessary to separate the catalyst from the treated water, it is very important for large-scale use of this process.

Arsenic and Trace Metals in Three West African rivers: Concentrations, Partitioning, and Distribution in Particle-Size Fractions.

Despite increasing mining activities, and fertilizer and pesticide use in agriculture, little information is available on the status of metal(loid) contamination in rivers in West Africa. Sixty water samples were collected from three significant rivers (the Bandama, Comoé, and Bia Rivers) in Côte d'Ivoire, the world's top cocoa producer, to examine As, Pb, Cu, Fe, Cd, and Zn concentrations, partitioning, and distribution in suspended particle-size fractions. The results showed higher total metal(loid) concentrations during the dry and flood seasons than during the rainy season. Significant As and Pb concentrations, moderate Cu and Fe concentrations, and low Zn concentrations were observed during the flood season. The metal(loid) concentrations decreased upstream to downstream primarily due to increased deposition through flocculation. Inverse or no obvious spatial trends often were observed, indicative of local contamination from anthropogenic activities. The suspended solid phase and the strength of metal affinity to the particles controlled the metal(loid) concentrations. Furthermore, total metal(loid) concentrations increased significantly with decreasing suspended particle-size fractions. The results underline that As and Pb contents in the Comoé and Bia Rivers threaten the health of at least 3 million people in southeastern Côte d'Ivoire. Filtering river waters before use will significantly reduce human health risks.

Preliminary data on arsenic and trace metals concentrations in wetlands around artisanal and industrial mining areas (Cote d'Ivoire, West Africa).

This data article is issued from the research article ''Distribution trends and ecological risks of arsenic and trace metals in wetland sediments around gold mining activities in central-southern and southeastern Côte d'Ivoire'' [1]. It presents arsenic and trace metal Cd, Pb, Cu, Zn, Cr, Co, Fe, Al, Mn, and Ni loadings in surface sediments collected from industrial mining, artisanal and small scale mining, and non-mining areas (West Africa). Are also provided, hierarchical dendrograms and factor loadings derived from the Hierarchical Clustering Analysis (HCA) and the principal component analysis (PCA), respectively. Data ranged from

Selective synthesis of Fe3O4Au x Ag y nanomaterials and their potential applications in catalysis and nanomedicine.

In these recent years, magnetite (Fe3O4) has witnessed a growing interest in the scientific community as a potential material in various fields of application namely in catalysis, biosensing, hyperthermia treatments, magnetic resonance imaging (MRI) contrast agents and drug delivery. Their unique properties such as metal-insulator phase transitions, superconductivity, low Curie temperature, and magnetoresistance make magnetite special and need further investigation. On the other hand, nanoparticles especially gold nanoparticles (Au NPs) exhibit striking features that are not observed in the bulk counterparts. For instance, the mentioned ferromagnetism in Au NPs coated with protective agents such as dodecane thiol, in addition to their aptitude to be used in near-infrared (NIR) light sensitivity and their high adsorptive ability in tumor cell, make them useful in nanomedicine application. Besides, silver nanoparticles (Ag NPs) are known as an antimicrobial agent. Put together, the [Formula: see text] nanocomposites with tunable size can therefore display important demanding properties for diverse applications. In this review, we try to examine the new trend of magnetite-based nanomaterial synthesis and their application in catalysis and nanomedicine.

Zinc, copper, cadmium, and lead concentrations in water, sediment, and Anadara senilis in a tropical estuary.

Spatial and seasonal contaminations of zinc, copper, cadmium, and lead were assessed simultaneously in water, sediment, and in the bivalve Arca senilis from the Milliardaires Bay (Cote d'Ivoire) between February and October 2008. The metal load in sediments doubled from the dry season to the rainy season. On the contrary, metal concentrations in waters decreased significantly from the dry season to the rainy season. Zn and Pb concentrations in A. senilis showed similar seasonal variation with sediments. On the other hand, A. senilis regulated Cu concentrations by eliminating about twelve times the concentration accumulated during the dry season. Apparent Zn, Cu, Cd, and Pb concentration gradients were observed, but no significant differences between stations for sediment, water, and A. senilis. Concentrations in sediment increased from stations close to Abidjan Harbor towards farther stations, while concentrations in A. senilis showed a reverse gradient. The distribution gradient of A. senilis indicates pollution from local sources, but a transplant experiment is needed to better understand the observed spatial trend. Zn and Cu concentrations may pose little risk to human health and the environment, but they are the highest on the regional scale. On the contrary, Cd and Pb concentrations in A. senilis exceeded the maximum allowable limits set by the European Commission. Complementary studies including chemical speciation should be considered to provide a more accurate assessment of the risk of heavy metals to the environment.

Investigation of dye adsorption onto activated carbon from the shells of Macoré fruit.

The activated carbon obtained from the shells of Macoré fruit was used as an adsorbent for the removal of dyes such as methylene blue (MB) and methyl orange (MO) from synthetic contaminated aqueous solutions. It holds that the adsorption is more favourable at acidic pH, with an optimum adsorption at pH = 2. At this pH, the adsorption rate is more than 98% for the two dyes. The sorption capacity was enhanced by increasing the amount of activated carbon. Above room temperature, the adsorption rates remain constant at a value of approximately 99%. The study of the adsorption kinetics indicates that the adsorption on the studied dyes follows second-order kinetics. The isotherm adsorption data were found to be described by both Langmuir and Freundlich. In addition, the thermodynamic studies revealed that the adsorption process is a favourable, endothermic and spontaneous phenomenon.

Design and study of a cost-effective solar photoreactor for pesticide removal from water.

In order to remove pesticides from water, a basic photoreactor has been built. We evaluated the performance of this photoreactor using two commercial photocatalytic materials from Ahlstrom group and from Saint-Gobain, with solar and artificial UV-lamps. We compared the kinetics of photocatalytic degradation and mineralization of Diuron in the same reactor with of both photocatalyst supports. We showed that Diuron is easily degraded under solar or artificial irradiation, while the kinetics of mineralization in the same condition are very slow. The behaviour of these commercial materials has been studied after several uses in the same conditions. We showed the effectiveness of this basic and cheap photoreactor for the elimination of pesticide in water.