Removal of nitrogen from secondary effluent of a petrochemical industrial park by a hybrid biofilm-carrier reactor with one-stage ANAMMOX.

A laboratory study was undertaken to explore the capability of one-stage ANAMMOX in a hybrid biofilm-carrier reactor (HBCR) fed with petrochemical wastewater. Under favorable operating conditions in continuous-flow operations (at the dissolved oxygen level of 0.5-1.0 mg L(-1)), the average total nitrogen (TN) removal efficiency reached 62-67% and approximately 90% of TN can be removed by ANAMMOX. In batch operations of the hybrid biofilm-carrier reactor (without adding carbon substrate), the specific TN removal rate of the reactor in which both Kaldnes and nonwoven carriers were kept was two-fold higher than that of the reactor in which only nonwoven carriers were kept. This indicated that the microbial activity of thinner biofilms (Kaldnes carriers) was remarkably higher than that of thicker biofilms (nonwoven carriers). Finally, based on the 16S rRNA clone library, a cluster of ANAMMOX Candidatus Kuenenia stuttgartiensis was identified.

Monitoring of geosmin producing Anabaena circinalis using quantitative PCR.

Geosmin is one of the most commonly detected off-flavor chemicals present in reservoirs and drinking water systems. Quantitative real-time PCR (qPCR) is useful for quantifying geosmin-producers by focusing on the gene encoding geosmin synthase, which is responsible for geosmin synthesis. In this study, several primers and probes were designed and evaluated to detect the geosmin synthase gene in cyanobacteria. The specificity of primer and probe sets was tested using 21 strains of laboratory cultured cyanobacteria isolated from surface waters in Australia (18) and Taiwan (2), including 6 strains with geosmin producing ability. The results showed that the primers designed in this study could successfully detect all geosmin producing strains tested. The selected primers were used in a qPCR assay, and the calibration curves were linear from 5 × 10(1) to 5 × 10(5) copies mL(-1), with a high correlation coefficient (R(2) = 0.999). This method was then applied to analyze samples taken from Myponga Reservoir, South Australia, during a cyanobacterial bloom event. The results showed good correlations between qPCR techniques and traditional methods, including cell counts determined by microscopy and geosmin concentration measured using gas chromatography (GC) coupled with a mass selective detector (MSD). Results demonstrate that qPCR could be used for tracking geosmin-producing cyanobacteria in drinking water reservoirs. The qPCR assay may provide water utilities with the ability to properly characterize a taste and odor episode and choose appropriate management and treatment options.