Broadband tunable electro-optic switch/power divider as potential building blocks in integrated lithium niobate photonics.

We demonstrate an electro-optic (EO) switch or in general, an EO controllable power divider based on a periodically poled lithium niobate (PPLN) polarization mode converter (PMC) and a five-waveguide adiabatic coupler integrated on a Ti:LN photonic circuit chip. In this integrated photonic circuit (IPC) device, the PPLN works as an EO controllable polarization rotator (and therefore a PMC), while the adiabatic coupler functions as a broadband polarization beam splitter (PBS). The 1-cm long PPLN EO PMC of the IPC device is characterized to have a half-wave (or switching) voltage of Vπ∼20 V and a conversion bandwidth of ∼2.6 nm. The splitting ratios of the adiabatic coupler PBS in the IPC device are >99% for both polarization modes over a broad spectral range from 1500-1640 nm. The EO mode of the implemented IPC device is activated when the PPLN EO PMC section is driven by an external voltage; the characterized EO switching/power division behavior of the device is in good agreement with the theoretical fit. The tunability of the EO IPC device in the 100-nm experimental spectral range is also demonstrated via the temperature tuning. The featured broad tunability and high integrability of the EO device presented in this study facilitates it to be an advantageous building block for realizing an on-chip photonic system.

Simultaneous electro-optic spectral switching and Q switching in a dual-wavelength Nd:YVO4 laser based on an aperiodic optical superlattice lithium niobate.

We report the demonstration of an electro-optic (EO) switchable dual-wavelength (1064- and 1342-nm) Nd:YVO4 laser based on an aperiodically poled lithium niobate (APPLN) chip whose domain structure is designed using aperiodic optical superlattice (AOS) technology. The APPLN works as a wavelength-dependent EO polarization-state controller in the polarization-dependent laser gain system to enable switching among multiple laser spectra simply by voltage control. When the APPLN device is driven by a voltage-pulse train modulating between a VHQ (in which target laser lines obtain gain) and a VLQ (in which laser lines are gain suppressed), the unique laser system can produce Q-switched laser pulses at dual wavelengths 1064 and 1342 nm, single wavelength 1064 nm, and single wavelength 1342 nm, as well as their non-phase-matched sum-frequency and second-harmonic generations at VHQ = 0, 267, and 895 V, respectively. A laser can benefit from such a novel, to the best of our knowledge, simultaneous EO spectral switching and Q switching mechanisms to increase its processing speed and multiplexity for versatile applications.

Ultra-compact, broadband adiabatic passage optical couplers in thin-film lithium niobate on insulator waveguides.

We report the first demonstration of broadband adiabatic directional couplers in thin-film lithium niobate on insulator (LNOI) waveguides. A three LN-waveguide configuration with each waveguide having a ridge cross section of less than 1 square micron, built atop a layer of SiO2 based on a 500-µm-thick Si substrate, has been designed and constructed to optically emulate a three-state stimulated Raman adiabatic passage system, with which a unique counterintuitive adiabatic light transfer phenomenon in a high coupling efficiency of >97% (corresponding to a >15 dB splitting ratio) spanning telecom S, C, and L bands for both TE and TM polarization modes has been observed for a 2-mm long coupler length. An even broader operating bandwidth of >800 nm of the device can be found from the simulation fitting of the experimental data. The footprint of the realized LNOI adiabatic coupler has been reduced by >99% compared to its bulk counterparts. Such an ultra-compact, broadband LNOI adiabatic coupler can be further used to implement or integrate with various photonic elements, a potential building block for realizing large-scale integrated photonic (quantum) circuits in LN.

Electro-optically spectrum switchable, multiwavelength optical parametric oscillators based on aperiodically poled lithium niobate.

We report the first fast switchable multiwavelength optical parametric oscillator based on aperiodic optical superlattice technology. The constructed aperiodically poled lithium niobate (APPLN) integrates the functionalities of two quasi-phase-matching devices on a chip to work simultaneously as an electro-optic (EO) switchable notch-like filter and a multiline optical parametric downconverter. When such an APPLN is built in a 1064-nm-pumped optical resonator system, we achieve the oscillation of dual signals at 1540 and 1550 nm, for a single signal at 1540 nm, and a single signal at 1550 nm in the system when the 3-cm-long APPLN is driven by 0 V, 354 V, and 805 V, respectively. The switching among the three signal spectra is operationally simple and electro-optically fast. The electro-optically switched signals also feature enhanced power spectral density due to the unique EO gain-spectrum filtering mechanism employed in this work.

Spectral narrowing and manipulation in an optical parametric oscillator using periodically poled lithium niobate electro-optic polarization-mode converters.

We report a unique spectral narrowing and manipulation technique in an optical parametric oscillator (OPO) realized by an integrated periodically poled lithium niobate comprising an optical parametric gain medium sandwiched by two electro-optic polarization-mode converters (EO PMCs). We achieved a manipulation of the gain spectrum of the OPO via EO and/or temperature control of the EO PMCs, in which we obtained single to multiple signal spectral peaks from the OPO with a spectral width reduced by up to 10 times and peak intensity increased by up to 6 times in comparison with the original signal. Fast EO tuning of the narrowed signal spectral peak has also been demonstrated.