Size control of gold nanoparticles grown on polyaniline nanofibers for bistable memory devices.

Controlling reaction temperature for a set time enables the size of gold nanoparticles autoreduced on the surface of polyaniline nanofibers to be controlled. The size of the gold nanoparticles can be used to tune the electrical bistable memory effect in gold/polyaniline nanofiber composite devices. Turn-on voltages and on/off ratios improve with decreasing nanoparticle size, making this a promising method to enhance performance and create smaller devices. Long-term stability of the composites can be improved by the addition of stabilizers following autoreduction of the gold nanoparticles.

Multi-layer stackable polymer memory devices.

Multi-layer stackable polymer memory architecture is an interesting new direction for polymer memory. The memory density can be increased by increasing the number of stacked layers without reducing the minimum feature size. To achieve multi-level stacking, the polymer used must be able to be cross-linked so that it will not be dissolved upon deposition of additional layers. This requirement also makes the polymer robust enough to withstand conventional lithographic processes. In this paper, the various approaches to achieve cross-linkable polymer memory are discussed. Device fabrication and performance are also reported.

Patterning organic single-crystal transistor arrays.

Field-effect transistors made of organic single crystals are ideal for studying the charge transport characteristics of organic semiconductor materials. Their outstanding device performance, relative to that of transistors made of organic thin films, makes them also attractive candidates for electronic applications such as active matrix displays and sensor arrays. These applications require minimal cross-talk between neighbouring devices. In the case of thin film systems, simple patterning of the active semiconductor layer minimizes cross-talk. But when using organic single crystals, the only approach currently available for creating arrays of separate devices is manual selection and placing of individual crystals-a process prohibitive for producing devices at high density and with reasonable throughput. In contrast, inorganic crystals have been grown in extended arrays, and efficient and large-area fabrication of silicon crystalline islands with high mobilities for electronic applications has been reported. Here we describe a method for effectively fabricating large arrays of single crystals of a wide range of organic semiconductor materials directly onto transistor source-drain electrodes. We find that film domains of octadecyltriethoxysilane microcontact-printed onto either clean Si/SiO(2) surfaces or flexible plastic provide control over the nucleation of vapour-grown organic single crystals. This allows us to fabricate large arrays of high-performance organic single-crystal field-effect transistors with mobilities as high as 2.4 cm(2) V(-1) s(-1) and on/off ratios greater than 10(7), and devices on flexible substrates that retain their performance after significant bending. These results suggest that our fabrication approach constitutes a promising step that might ultimately allow us to utilize high-performance organic single-crystal field-effect transistors for large-area electronics applications.

Digital memory device based on tobacco mosaic virus conjugated with nanoparticles.

Nanostructured viruses are attractive for use as templates for ordering quantum dots to make self-assembled building blocks for next-generation electronic devices. So far, only a few types of electronic devices have been fabricated from biomolecules due to the lack of charge transport through biomolecular junctions. Here, we show a novel electronic memory effect by incorporating platinum nanoparticles into tobacco mosaic virus. The memory effect is based on conductance switching, which leads to the occurrence of bistable states with an on/off ratio larger than three orders of magnitude. The mechanism of this process is attributed to charge trapping in the nanoparticles for data storage and a tunnelling process in the high conductance state. Such hybrid bio-inorganic nanostructures show promise for applications in future nanoelectronics.

Polyaniline nanofiber/gold nanoparticle nonvolatile memory.

A nonvolatile plastic digital memory device based on nanofibers of the conjugated polymer polyaniline decorated with gold nanoparticles is reported. The device has a simple structure consisting of the plastic composite film sandwiched between two electrodes. An external bias is used to program the ON and OFF states of the device that are separated by a 3-orders-of-magnitude difference in conductivity. ON-OFF switching times of less than 25 ns are observed by electrical pulse measurements. The devices possess prolonged retention times of several days after they have been programmed. Write-read-erase cycles are also demonstrated. The switching mechanism is attributed to an electric-field-induced charge transfer from the polyaniline nanofibers to the gold nanoparticles. The active polymer layer is created by growing nanometer size gold particles within 30-nm-diameter polyaniline nanofibers using a redox reaction with chloroauric acid. This device combines two exciting research areas--nanoparticles and conducting polymers--to form a novel materials system with unique functionality.