Estimation of microplastic emission and transfer into Tokyo Bay, Japan, using material flow analysis.

To reduce microplastic (MP) discharge into the aquatic environment, it is necessary to properly identify its sources and amounts. Here, specific MP sources, i.e., personal care products (PCPs), fibers from clothes, and tire-wear particles (TWPs) were focused, and MP generations from these sources in the Tokyo Bay watershed, Japan, were estimated based on statistical data on production and reported emission factors of the MP sources and executing considering uncertainty on the data. Potential annual MP emission into Tokyo Bay was estimated to be 10.2 ± 1.6, 38 ± 22, and 1500-1800 tons for PCPs, fibers, and TWPs, respectively. Emissions into Tokyo Bay by assuming MP density and diameter was estimated. For fiber, the fraction to potential emission was estimated at 1.0-2.8 %. This study contributes to determining potential discharge pathways. This will assist in the application of appropriate measures to reduce MP discharge into water bodies.

Impact of introducing net-zero carbon strategies on tropospheric ozone (O3) and fine particulate matter (PM2.5) concentrations in Japanese region in 2050.

In this study, we estimated the future emission inventory of primary air pollutants in Japan in 2050 after introducing low-carbon technology based on the results of the socio-economic model provided by the Japanese government. The results suggested that introducing net-zero carbon technology would contribute to a 50-60 % decrease in primary NOx, SO2, and CO emissions and a ~30 % decrease in primary emissions of volatile organic compounds (VOCs) and PM2.5. The estimated emission inventory and future meteorological conditions in 2050 were applied as inputs to a chemical transport model. A scenario involving the application of future reduction strategies with relatively moderate global warming (RCP4.5) was evaluated. The results showed that the concentration of tropospheric ozone (O3) was highly reduced compared with that in 2015 after applying net-zero carbon reduction strategies. On the other hand, the fine particulate matter (PM2.5) concentration under the 2050 scenario was expected to be equal or higher because of the growth in secondary aerosol formation caused by the increase in short-wave radiation. Finally, the premature mortality change from 2015 to 2050 was analyzed, and the change in air quality contributed by net-zero carbon technology will contribute to a ~4000 decrease in premature deaths in Japan.

Ammonia/ammonium removal/recovery from wastewaters using bioelectrochemical systems (BES): A review.

This review updates the current research efforts on using BES to recover NH3/NH4+, highlighting the novel configurations and introducing the working principles and the applications of microbial fuel cell (MFC), microbial electrolysis cell (MEC), microbial desalination cell (MDC), and microbial electrosynthesis cell (MESC) for NH3/NH4+ removal/recovery. However, commonly studied BES processes for NH3/NH4+ removal/recovery are energy intensive with external aeration needed for NH3 stripping being the largest energy input. In such a process bipolar membranes used for yielding a local alkaline pool recovering NH3 is not cost-effective. This gives a chance to microbial electrosynthesis which turned out to be a potential alternative option to approach circular bioeconomy. Furtherly, the reactor volume and NH3/NH4+ removal/recovery efficiency has a weakly positive correlation, indicating that there might be other factors controlling the reactor performance that are yet to be investigated.

Increased nitrogen deposition contributes to plant biodiversity loss in Japan: Insights from long-term historical monitoring data.

Atmospheric deposition of reactive nitrogen compounds (Nrs) has been recognized as a threat to plant diversity in terrestrial ecosystems. As a first attempt to investigate the relationship between Nrs deposition and plant diversity loss in Japan, we collected and analyzed the available long-term nationwide monitoring data on annual Nrs deposition and plant (tree) species, and evaluated the relationship between Nrs deposition and plant species loss at corresponding sites. Analyses of the available data showed that the amount of Nrs deposited annually tended to decrease at two monitoring sites (Yusuhara, Hedomisaki) and increase at six monitoring sites across Japan (Rishiri, Sadoseki, Tokyo, Aichi, Oki, and Ogasawara) during the late 1980s to 2011, especially at Aichi (11.8-21.6 kgN·ha-1·yr-1), Tokyo (10.0-23.5 kgN·ha-1·yr-1), Oki (6.63-14.1 kgN·ha-1·yr-1), and Rishiri (4.52-7.82 kgN·ha-1·yr-1). Another long-term study, the Monitoring Sites 1000 Project, investigated the growth of tree species at 20 core sites across Japan during 2004-2012. The sites with higher potential plant diversity loss were close to those sites where Nrs deposition had markedly increased over the 20 years, such as Tokyo, Aichi, and Oki. Analyses of long-term monitoring data for tree species in the Tokyo University Forest in Aichi revealed that 22 of the 273 tree species (8.05%) disappeared during the period of 1990-2010, and twelve out of the 22 lost species were shrub species less than 5 m tall. Although our study obviously has some limitations in quantitatively presenting the relationship between the loss of plant diversity and increased atmospheric Nrs deposition in Japan, our findings provide evidence for this relationship based on analyses of historical nationwide monitoring data. These findings will be useful for establishing N critical loads for Japanese forests.

Revaluation of stockpile amount of PFOS-containing aqueous film-forming foam in Japan: gaps and pitfalls in the stockpile survey.

Stockpiles of perfluoro-octane sulfonic acid (PFOS) containing aqueous film-forming foam (AFFF) have the potential to be emitted by leaching, spills, and during use in fire response and other processes. Several studies have discussed the high levels of stockpiled PFOS-containing AFFF and the risk they pose to the environment; however, there are large gaps in the amounts in Japan compared with other countries. For example, 300 tons are stockpiled in Canada, 2200-2600 tons in Switzerland, 1400 tons in Norway, and 19,000 tons in Japan from their reports for publication. The gap is considered to be a result of lack of surveys of several important sources. In this study, we revaluated the stockpile of AFFF in Japan to verify the reported value and identify the source of this gap based on information available in peer-reviewed papers, governmental reports, and business reports. The major reason for the gap between Japan and other countries was considered to be the survey of stockpiles in car-parking facilities, which accounted for 46.7% of the total amounts in Japan, but were not considered in other countries. These stockpiles indicate a high potential for accidental leaching or spilling of the AFFF by careless storage. Therefore, it is recommended that continual surveys of the AFFF stockpile in car-parking facilities be conducted in the rest of the world.

Cross-border impacts of the restriction of hazardous substances: a perspective based on Japanese solders.

Despite the relevance of the global economy, Regulatory Impact Assessments of the restriction of hazardous substances (RoHS) in the European Union (EU) are based only on domestic impacts. This paper explores the cross-border environmental impacts of the RoHS by focusing on the shifts to lead-free solders in Japan, which exports many electronics to the EU. The regulatory impacts are quantified by integrating a material flow analysis for metals constituting a solder with a scenario analysis with and without the RoHS. The results indicate that the EU regulation, the RoHS, has triggered shifts in Japan to lead-free solders, not only for electronics subject to this regulation, but for other products as well. We also find that the RoHS leads to a slow reduction in environmental emissions of the target, lead, but results in a rapid increase in the use of tin and silver in lead-free solders. This indicates the importance of assessing potential alternative substances, the use of which may increase as a result of adhering to the RoHS. The latter constitutes a negative impact because of recent concerns regarding resource criticality.

Assessment of the effects of the Japanese shift to lead-free solders and its impact on material substitution and environmental emissions by a dynamic material flow analysis.

Lead-free electronics has been extensively studied, whereas their adoption by society and their impact on material substitution and environmental emissions are not well understood. Through a material flow analysis (MFA), this paper explores the life cycle flows for solder-containing metals in Japan, which leads the world in the shift to lead-free solders in electronics. The results indicate that the shift has been progressing rapidly for a decade, and that substitutes for lead in solders, which include silver and copper, are still in the early life cycle stages. The results also show, however, that such substitution slows down during the late life cycle stages owing to long electronic product lifespans. This deceleration of material substitution in the solder life cycle may not only preclude a reduction in lead emissions to air but also accelerate an increase in silver emissions to air and water. As an effective measure against ongoing lead emissions, our scenario analysis suggests an aggressive recycling program for printed circuit boards that utilizes an existing recycling scheme.