Radio-frequency current drive for thermonuclear fusion reactors.

Principal research on energy from thermonuclear fusion uses Deuterium-Tritium plasmas magnetically trapped in toroidal devices. As major scientific problem for an economic (i.e., really feasible) reactor, we must understand how to lead strongly heated plasmas to sustain a high fusion gain while large fraction of current is self-produced via the presence of strong pressure gradient. To suppress turbulent eddies that impair thermal insulation and pressure tight of the plasma, current drive (CD) is necessary. However, tools envisaged so far in ITER (International Thermonuclear Experiment Rector) are unable accomplishing this task that requires efficiently and flexibly matching the natural current profiles of plasma. Consequently, viability of a thermonuclear reactor should be problematic. Multi-megawatt radio-frequency (RF) power coupled to plasma would produce the necessary CD, but modelling results based on previous understanding found difficult the extrapolation of this CD concept to reactor conditions of high temperature plasma, and greater flexibility of method would also be required. Here we present new model results based on standard quasilinear (QL) theory that allow establish conditions to drive efficiently and flexibly the RF-driven current at large radii of the plasma column, as necessary for the goal of a reactor.

Implementation of the new multichannel X-mode edge density profile reflectometer for the ICRF antenna on ASDEX Upgrade.

A new multichannel frequency modulated continuous-wave reflectometry diagnostic has been successfully installed and commissioned on ASDEX Upgrade to measure the plasma edge electron density profile evolution in front of the Ion Cyclotron Range of Frequencies (ICRF) antenna. The design of the new three-strap ICRF antenna integrates ten pairs (sending and receiving) of microwave reflectometry antennas. The multichannel reflectometer can use three of these to measure the edge electron density profiles up to 2 × 1019 m-3, at different poloidal locations, allowing the direct study of the local plasma layers in front of the ICRF antenna. ICRF power coupling, operational effects, and poloidal variations of the plasma density profile can be consistently studied for the first time. In this work the diagnostic hardware architecture is described and the obtained density profile measurements were used to track outer radial plasma position and plasma shape.

A microwave interferometer for small and tenuous plasma density measurements.

The non-intrusive density measurement of the thin plasma produced by a mini-helicon space thruster (HPH.com project) is a challenge, due to the broad density range (between 10(16) m(-3) and 10(19) m(-3)) and the small size of the plasma source (2 cm of diameter). A microwave interferometer has been developed for this purpose. Due to the small size of plasma, the probing beam wavelength must be small (λ = 4 mm), thus a very high sensitivity interferometer is required in order to observe the lower density values. A low noise digital phase detector with a phase noise of 0.02° has been used, corresponding to a density of 0.5 × 10(16) m(-3).

Current drive at plasma densities required for thermonuclear reactors.

Progress in thermonuclear fusion energy research based on deuterium plasmas magnetically confined in toroidal tokamak devices requires the development of efficient current drive methods. Previous experiments have shown that plasma current can be driven effectively by externally launched radio frequency power coupled to lower hybrid plasma waves. However, at the high plasma densities required for fusion power plants, the coupled radio frequency power does not penetrate into the plasma core, possibly because of strong wave interactions with the plasma edge. Here we show experiments performed on FTU (Frascati Tokamak Upgrade) based on theoretical predictions that nonlinear interactions diminish when the peripheral plasma electron temperature is high, allowing significant wave penetration at high density. The results show that the coupled radio frequency power can penetrate into high-density plasmas due to weaker plasma edge effects, thus extending the effective range of lower hybrid current drive towards the domain relevant for fusion reactors.

Controlling the profile of ion-cyclotron-resonant ions in JET with the wave-induced pinch effect.

Experiments on the JET tokamak show that the wave-induced pinch in the presence of toroidally asymmetric waves can provide a tool for controlling the profile of ion-cyclotron-resonant 3He ions. Direct evidence for the wave-induced pinch has been obtained from the measured gamma-ray emission profiles. Concurrent differences in the excitation of Alfvén eigenmodes (AEs), sawtooth stabilization, electron temperatures, and fast-ion stored energies are observed. The measured location of the AEs and gamma-ray emission profiles are consistent with the fast-ion radial gradient providing the drive for AEs.

JET quasistationary internal-transport-barrier operation with active control of the pressure profile.

Quasistationary operation has been achieved on the Joint European Torus tokamak in internal-transport-barrier (ITB) scenarios, with the discharge time limited only by plant constraints. Full current drive was obtained over all the high performance phase by using lower hybrid current drive. For the first time feedback control on the total pressure and on the electron temperature profile was implemented by using, respectively, the neutral beams and the ion-cyclotron waves. Although impurity accumulation could be a problem in steady state ITBs, these experiments bring some elements to answer to it.

Alpha-tail production with ion-cyclotron-resonance heating of 4He-beam ions in JET plasmas.

Third-harmonic ion-cyclotron-resonance heating of 4He-beam ions has produced for the first time on the JET tokamak high-energy populations of 4He ions to simulate 3.5 MeV fusion-born alpha (alpha) particles. Acceleration of 4He ions to the MeV energy range is confirmed by gamma-ray emission from the nuclear reaction 9Be(alpha,ngamma) 12C and excitation of Alfvén eigenmodes. Concomitant electron heating and sawtooth stabilization are observed. The scheme could be used in next-step tokamaks to gain information on trapped alpha particles and to test alpha diagnostics in the early nonactivated phase of operation.