RESUMO
OBJECTIVES: To evaluate the survival rates and marginal bone loss of narrow-diameter titanium-zirconium implants supporting complete maxillary and mandibular overdentures up to 3 years after loading. MATERIALS AND METHODS: Ten completely edentulous patients who were dissatisfied with their complete dentures were enrolled. Two narrow-diameter implants were placed in the canine region of the maxilla and mandible. After second-stage surgery, implant-supported overdentures (palatal-free) attached by parallel alignable stud-attachments were placed. Patients were followed periodically for up to 36 months. Standardized radiographs were taken at baseline, 12 and 36 months to analyze mean marginal bone level changes around the implants. RESULTS: The Kaplan-Meier survival rates were 100% for mandibular and 68.0% (SE ± 10.9%) for maxillary implants at 36 months (p = .008). Six maxillary implants failed after loading; no mandibular implants were lost. Five implants failed due to loss of osseointegration. One implant fractured. The mean marginal bone level changes around the analyzed implants (n = 28, 9 patients) were -0.71 ± 0.82 mm in the mandible and -2.08 ± 1.52 mm in the maxilla at the 36-month follow-up. The difference in marginal bone level changes between the maxilla and mandible was significant (p = .019) at the 12- and 36-month follow-ups. CONCLUSION: Two narrow-diameter titanium-zirconium implants with stud-attachments showed a highly satisfactory outcome in the mandible. The maxillary implants showed a high failure rate and significantly more bone loss over time than the mandibular implants. The minimal concept of two implants and an overdenture should be limited to the edentulous mandible.
RESUMO
Silane chemistry has emerged as a powerful tool for surface modification, offering a versatile means to enhance the properties of various substrates, such as dental implant abutment materials. In this study, we investigated the stability of the 3-aminopropyldiisopropylethoxysilane (APDS) layer on yttria-partially stabilized zirconia (Y-TZP) surfaces after mechanical, acid, and thermal treatment in order to simulate fluctuations within the oral cavity. To accomplish that, the viability of human gingival fibroblasts on APDS-modified surfaces after applied treatment strategies was assessed by live/dead staining. Moreover, the hydrolysis stability and enzymatic degradation resistance of crosslinked fibronectin to the APDS layer was examined by immunostaining and western blot. The results revealed that the applied modifications were not affected by the different treatment conditions and could withstand the fluctuations in the oral cavity. Furthermore, crosslinked fibronectin on silanized Y-TZP was stable against hydrolysis over 21 days and enzymatic degradation. We thus can conclude that the proposed functionalization method has high potential to tolerate harmful effects within the oral cavity and remains unchanged on the surface.
Assuntos
Fibronectinas , Zircônio , Humanos , Microscopia Eletrônica de Varredura , Teste de Materiais , Propriedades de Superfície , Zircônio/química , Ítrio/química , Materiais DentáriosRESUMO
The aim of this in vitro study was to investigate the effect of hydrogen peroxide (H2O2) on the surface properties of various zirconia-based dental implant materials and the response of human alveolar bone osteoblasts. For this purpose, discs of two zirconia-based materials with smooth and roughened surfaces were immersed in 20% H2O2 for two hours. Scanning electron and atomic force microscopy showed no topographic changes after H2O2-treatment. Contact angle measurements (1), X-ray photoelectron spectroscopy (2) and X-ray diffraction (3) indicated that H2O2-treated surfaces (1) increased in hydrophilicity (p < 0.05) and (2) on three surfaces the carbon content decreased (33-60%), while (3) the monoclinic phase increased on all surfaces. Immunofluorescence analysis of the cell area and DNA-quantification and alkaline phosphatase activity revealed no effect of H2O2-treatment on cell behavior. Proliferation activity was significantly higher on three of the four untreated surfaces, especially on the smooth surfaces (p < 0.05). Within the limitations of this study, it can be concluded that exposure of zirconia surfaces to 20% H2O2 for 2 h increases the wettability of the surfaces, but also seems to increase the monoclinic phase, especially on roughened surfaces, which can be considered detrimental to material stability. Moreover, the H2O2-treatment has no influence on osteoblast behavior.
RESUMO
OBJECTIVES: This in vitro study examined the effect of different implant drilling template designs on heat generation during osteotomy and on cooling fluid distribution. MATERIAL AND METHODS: Five different template designs were investigated in a standardized setup against a control group and a negative control group: Occlusal-splint-design (OSD), OSD-covering, OSD-lateral opening, Bar design, and Orientation template. Pilot and one consecutive drill were run at 800 rpm with external irrigation and 2-kg load. Thermocouples recorded temperature changes at depths of 3, 6, and 9 mm in a bovine rib model. In the second experimental setup, the drill channel of one rib sample was perforated, and the irrigation volume passing through the drill channel was collected separately over time. RESULTS: Following mean temperature rises occurred [in °C]: control, 4.9; negative control, 12; OSD, 5.6; OSD-covering, 4.7; OSD-lateral opening, 3.8; Bar design, 5.1; and Orientation template, 4.9. The highest temperature increases were found at a drilling depth of 6 mm (p < .006). The 2.2-mm drill resulted in a significantly higher temperature rise than the 2.8-mm drill (p < .001). The mean volume (ml/min) of irrigation through the drill channel was Control group-flow, 28.5; OSD, 4.1; OSD-covering, 2; OSD-lateral opening; 5.8; bar design, 4; and Orientation template, 24.1. CONCLUSION: Within the limitations, it was shown that fully guided drilling templates reduce the amount of cooling liquid at the point of osteotomy. The template design had an influence on the effective volume of the cooling liquid. However, this did not seem to increase the intraosseous temperature significantly.
Assuntos
Implantes Dentários , Animais , Bovinos , Implantação Dentária Endóssea , Temperatura Alta , Osteotomia , TemperaturaRESUMO
OBJECTIVES: To summarize the existing evidence on patient-reported outcome measures (PROMs) of implant-supported restorations fabricated using a digital workflow in comparison to conventional manufacturing procedures. METHODS: A PICO strategy was executed using an electronic and manual search focusing on clinical studies evaluating PROMs of implant-supported restorations. Only clinical trials assessing conventional versus digital workflows for implant-supported restorations were included. PROMS on implant impression procedures and fabrication of final restorations were evaluated using random and fixed effects meta-analyses, while implant planning/placement was reported descriptively. RESULTS: Among 1062 titles identified, 14 studies were finally included, and only seven studies were eligible for meta-analysis. For implant planning and placement, only a qualitative analysis was possible due to heterogeneity between the studies. For impression procedures, the random effects model revealed statistically significant differences in taste, anxiety, nausea, pain, shortness of breath, and discomfort in favor of optical impressions. No significant difference in the subjective perception of the duration of an impression could be reported. For the final fabrication of restorations, no significant difference between veneered and monolithic posterior restorations was found in terms of esthetic, function, and general satisfaction. CONCLUSION: Most of the studies reporting about PROMs were published during the last ten years and limited to implant-supported single crowns in the posterior region. Based on PROMs, no scientifically proven recommendation for guided implant placement could be given at this time. Patients showed high preference for optical impressions, whereas no differences between veneered and monolithic restorations could be reported.
Assuntos
Desenho Assistido por Computador , Planejamento de Prótese Dentária , Coroas , Humanos , Medidas de Resultados Relatados pelo Paciente , Fluxo de TrabalhoRESUMO
To ensure the long-term success of dental implants, a functional attachment of the soft tissue to the surface of the implant abutment is decisively important in order to prevent the penetration of bacteria into the implant-bone interface, which can trigger peri-implant disease. Here a surface modification approach is described that includes the covalent immobilization of the extracellular matrix (ECM) proteins fibronectin and laminin via a crosslinker to silanized Ti6Al4V and Y-TZP surfaces. The surface properties are evaluated using static contact angle, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). The interaction of human gingival fibroblasts (HGFs) with the immobilized ECM proteins is verified by analyzing the localization of focal contacts, cell area, cell morphology, proliferation rate, and integrin expression. It is observed in the presence of fibronectin and laminin an increased cellular attachment, proliferation, and integrin expression of HGFs accompanied by a significantly higher number of focal adhesions. The presented approach holds great potential to enable a stronger bond between soft tissue and implant abutment surface. This could potentially help to prevent the penetration of bacteria in an in vivo application and thus reduce the risk of periimplant disease.
Assuntos
Implantes Dentários , Proteínas da Matriz Extracelular , Adesão Celular , Proliferação de Células , Dente Suporte , Fibroblastos , Gengiva , Humanos , Propriedades de Superfície , TitânioRESUMO
Augmentation of alveolar ridge defects is a technique-sensitive procedure in dental implantology. Depending on the size of the defect, it may be necessary to use autogenous bone blocks. However, patients may be against these blocks as these procedures are surgically invasive.
Case report: This report describes the restoration of a partially edentulous mandible, which suffered a major bone defect from the right canine to the third molar site after multiple implant losses. The use of a CAD/CAM allogeneic cancellous bone block from a living donor bone was planned for the reconstruction of the alveolar ridge at the defected site. A CBCT scan was taken and the virtual planning of the bone augmentation and placement of four implants was performed. The milled bone block was fixed for augmentation and the implants were placed using a CBCT-generated surgical guide. After osseointegration, a CAD/CAM-fabricated screw-retained metal-ceramic implant fixed partial denture with angulated screw channels was delivered.
Results: The use of CAD/CAM-milled, allogeneic bone block resulted in a time-efficient and simplified reconstruction of the defect because no donor site was used, and the fit of the block on the native bone was uneventful and fast. At the 1-year follow-up, an average peri-implant vertical soft tissue decrease of 1 mm on buccal and 0.3 mm on lingual sites was observed and the peri-implant tissues were healthy.
Conclusions: The long-term success of this CAD/CAM cancellous bone block needs to be evaluated in well-designed clinical studies.
Assuntos
Aumento do Rebordo Alveolar , Implantes Dentários , Transplante de Células-Tronco Hematopoéticas , Parafusos Ósseos , Transplante Ósseo , Implantação Dentária Endóssea , Prótese Dentária Fixada por Implante , Prótese Parcial Fixa , HumanosRESUMO
OBJECTIVE: To compare the radiographic marginal bone loss and clinical parameters of splinted and non-splinted fixed dental prostheses on short implants in the posterior region of the lower jaw 3 years after loading. MATERIAL AND METHODS: Twenty patients, 15 female and five males, with uni- or bilateral free-end situations in the mandible participated in the study. Two short implants (7 mm) in the posterior mandible were placed and patients were randomized to receive splinted (n = 11) or non-splinted (n = 13) cemented crowns. Marginal bone loss (MBL) was assessed on radiographs taken with customized positioning jigs at baseline, 1 and 3 years after loading. Plaque index (PI), gingival index (GI), probing depth (PD), and bleeding on probing (BOP) were measured. (ClinicalTrials.gov; identifier: NCT03558347). RESULTS: After 3-year survival rate of altogether 48 implants was 100% for both groups. Success rate (according to Papaspyridakos, Chen, Singh, Weber, & Gallucci, 2012) was 84.6% for non-splinted and 86.4% for splinted implants. At restoration level survival rate was 100% for both groups. Marginal bone level changes showed mean gain of 0.3 ± 0.8 mm for non-splinted and 0.1 ± 0.5 mm for splinted implants 3 years after loading. Statistical analysis showed no significant difference in PI, GI, PD, BOP, and marginal bone loss between both groups (p > .05). CONCLUSION: Within the limitations of this study it can be concluded that splinting crowns on short implants neither seems to affect the amount of marginal bone loss nor peri-implant health 3 years after loading.
Assuntos
Perda do Osso Alveolar , Implantes Dentários , Perda do Osso Alveolar/diagnóstico por imagem , Perda do Osso Alveolar/etiologia , Coroas , Planejamento de Prótese Dentária , Prótese Dentária Fixada por Implante , Falha de Restauração Dentária , Feminino , Seguimentos , Humanos , Masculino , Mandíbula/cirurgiaRESUMO
OBJECTIVES: To compare the removal of simulated biofilm at two different implant-supported restoration designs with various interproximal oral hygiene aids. METHODS: Mandibular models with a missing first molar were fabricated and provided with single implant analogues (centrally or distally placed) and two different crown designs (conventional [CCD] and alternative crown design [ACD]). Occlusion spray was applied to the crowns to simulate artificial biofilm. Thirty participants (dentists, dental hygienists, and laypersons) were equally divided and asked to clean the interproximal areas with five different cleaning devices to further evaluate if there were differences in their cleaning ability. The outcome was measured via standardized photos and the cleaning ratio, representing the cleaned surfaces in relation to the respective crown surface. Statistical analysis was performed by linear mixed-effects model with fixed effects for cleaning tools, surfaces, crown design and type of participant, and random effects for crowns. RESULTS: The mean cleaning ratio for the investigated tools and crown designs were (in%): Super floss: 76 ± 13/ACD and 57 ± 14/CCD (highest cleaning efficiency), followed by dental floss: 66 ± 13/ACD and 56 ± 15/CCD, interdental brush: 55 ± 10/ACD and 45 ± 9/CCD, electric interspace brush: 31 ± 10/ACD and 30 ± 1/CCD, microdroplet floss: 8 ± 9/ACD and 9 ± 8/CCD. There was evidence of an overall effect of each factor "cleaning tool," "surface," "crown design," and "participant" (p < 0.0001). CONCLUSIONS: ACD allowed more removal of the artificial biofilm than CCD with Super floss, dental floss, and interdental brush. Flossing and interproximal brushing were the most effective cleaning methods. A complete removal of the artificial biofilm could not be achieved in any group.
Assuntos
Placa Dentária , Higiene Bucal , Biofilmes , Coroas , Dispositivos para o Cuidado Bucal Domiciliar , HumanosRESUMO
PURPOSE: In implant dentistry, temporary restorations (TR) might often be required for up to one year. The aim of this in vitro study was to evaluate the long-time performance of four-unit TRs in the posterior region based on different materials and reinforcement methods. METHODS: One hundred and forty four TRs were manufactured on 16 models simulating an oral situation of two missing posterior teeth. With a computer-aided-design/computer-aided-manufacturing (CAD/CAM) workflow, a TR was fabricated (CAD; Telio CAD), which served as a template for other subgroups. With a vacuum-formed template, unreinforced and reinforced TRs [glass fibres (g; EverStick); polyethylenefibres (p; Ribbond original) and TRs with increased connector area (c; 27.5-35mm2)] were manufactured. Two different composite materials were used (C1: Luxatemp, C2: Protemp). Altogether, 16 subgroups with 8 specimens each were tested. After temporary luting (Temp Bond NE) and artificial-aging [1600 thermo-cycles (5-55°C), 240,000 chewing-cycles (50N)], all specimens were tested until fracture in a universal testing machine. RESULTS: After artificial aging, mean fracture loads (N) were: (C1)201.2±109.7, (C1c)1033.0±173.1, (C1p)90.0±40.0, (C1g)75.9±25.9, (C2)108.6±58.6, (C2c)1363.3±148.6, (C2p)104.7±54.7, (C2g)50.0±0.0 and (CAD)232.5±19.1. The one-factor ANOVA analysis showed significant differences for the factors temporary material (p<0.047), reinforcement (p<0.0001) and artificial-aging (p<0.0001). CONCLUSIONS: The study indicated that both CAD/CAM TRs and TRs with increased connector areas are suitable for long-term use of one year. No enhancement of fracture load was observed for fibre-reinforced TRs except for the fact that fractured TRs were not totally separated.
Assuntos
Força Compressiva , Restauração Dentária Temporária , Análise do Estresse Dentário , Resinas Acrílicas , Resinas Compostas , Desenho Assistido por Computador , Materiais Dentários , Planejamento de Prótese Dentária , Humanos , Teste de Materiais , Poliuretanos , Fatores de TempoRESUMO
OBJECTIVES: To investigate the influence of different temperatures on the compressive strength of glass ionomer cement (GIC) modified by the addition of silica-coated wax capsules; Material and Methods: Commercially-available GIC was modified by adding 10% silica-coated wax capsules. Test blocks were fabricated from pure cement (control) and modified cement (test), and stored in distilled water (37 °C/23 h). The compressive strength was determined using a universal testing machine under different temperatures (37 °C, 50 °C, and 60 °C). The maximum load to failure was recorded for each group. Fractured surfaces of selected test blocks were observed by scanning electron microscopy (SEM); Results: For the control group, the average compressive strength was 96.8 ± 11.8, 94.3 ± 5.7 and 72.5 ± 5.7 MPa for the temperatures 37 °C, 50 °C and 60 °C respectively. The test group reported compressive strength of 64.8 ± 5.4, 47.1 ± 5.4 and 33.4 ± 3.6 MPa at 37 °C, 50 °C and 60 °C, respectively. This represented a decrease of 28% in compressive strength with the increase in temperature from 37 °C to 50 °C and 45% from the 37 °C to the 60 °C group; Conclusion: GIC modified with 10% silica-coated wax capsules and temperature application show a distinct effect on the compressive strength of GIC. Considerable compressive strength reduction was detected if the temperature was above the melting temperature of the wax core.
RESUMO
OBJECTIVE: Improvements in the bioactivity of zirconia implants for accelerated healing and reduced morbidity have been of continuing interest in the fields of dentistry and orthopedic surgery. The aim of the present study was to examine whether UV treatment increases the osteoconductivity of zirconia-based materials. MATERIALS AND METHODS: Smooth and rough zirconia-based disks and cylindrical implants were treated with UV light for 15 min and subsequently placed in rat femurs. Surface characterization was performed using scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and contact angle measurements. RESULTS: In vivo histomorphometry revealed that the percentage of bone-implant contact and the amount of bone volume, formed around UV-treated implants, increased by 3-7-fold for smooth surfaces and by 1.4-1.7-fold for rough surfaces compared to non-treated specimens at Weeks 2 and 4 of healing, respectively. A biomechanical test showed that UV treatment accelerated the establishment of bone-zirconia integration and enhanced the strength of the bone-implant interface by two-fold. Additionally, surface characterization of the zirconia disks revealed that UV treatment decreased the amount of surface carbon and converted the hydrophilic status from hydrophobic to superhydrophilic. CONCLUSIONS: This study indicates that UV light pretreatment enhances the osteoconductive capacity of zirconia-based materials.
RESUMO
OBJECTIVES: To examine the effect of ultraviolet light (UV) treatment on the surface characteristics of two acid-etched zirconia-based dental implant materials. METHODS: Discs of two zirconia-based materials (Zr1 and Zr2) with smooth (m) and roughened (r) surfaces were treated by UV light for 15min. The surface topography was investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The surface elemental composition of all samples was determined by X-ray photoelectron spectroscopy (XPS), the crystalline property by X-ray diffraction (XRD) and the hydrophilic status by contact angle (CA) measurements of a water droplet. RESULTS: SEM and AFM revealed quantitative and qualitative differences between the roughened and smooth surfaces. UV treatment did not induce any topographic changes of the tested surfaces (p>0.05). All UV-treated samples showed a significant surface elemental content change with a decrease of carbon by 43-81%, an increase of oxygen by 19-45%, and an increase of zirconia by 9-41%. Upon UV treatment, a 19-25% increase of the crystalline monoclinic phase was observed on surfaces of material Zr1, whereas a slight increase on the smooth Zr2 surface (+3%) and a decrease on the roughened Zr2 surface by 20% was observed. For all samples, the hydrophilic status changed significantly from hydrophobic to hydrophilic by UV treatment (p<0.0001). The average contact angles were between 56.4° and 69° before and 2.5° and 14.1° after UV-light treatment. SIGNIFICANCE: UV treatment altered the physicochemical properties of the two zirconia implant surfaces investigated. The mechanism by which such changes are induced requires further investigation.
Assuntos
Implantes Dentários , Raios Ultravioleta , Zircônio/química , Materiais Dentários/química , Interações Hidrofóbicas e Hidrofílicas , Teste de Materiais , Fenômenos Mecânicos , Microscopia Eletrônica de Varredura , Espectroscopia Fotoeletrônica , Propriedades de Superfície , Difração de Raios XRESUMO
Over the last decade tissue engineering has emerged as a key factor in bone regeneration within the field of cranio-maxillofacial surgery. Despite this in vivo analysis of tissue-engineered-constructs to monitor bone rehabilitation are difficult to conduct. Novel high-resolving flat-panel based volume CTs (fp-VCT) are increasingly used for imaging bone structures. This study compares the potential value of novel fp-VCT with conventional multidetector CT (MDCT) based on a sheep sinus floor elevation model. Calcium-hydroxyapatite reinforced collagen scaffolds were populated with autologous osteoblasts and implanted into sheep maxillary sinus. After 8, 16 and 24 weeks MDCT and fp-VCT scans were performed to investigate the volume of the augmented area; densities of cancellous and compact bone were assessed as comparative values. fp-VCT imaging resulted in higher spatial resolution, which was advantageous when separating closely related anatomical structures (i.e. trabecular and compact bone, biomaterials). Fp-VCT facilitated imaging of alterations occurring in test specimens over time. fp-VCTs therefore displayed high volume coverage, dynamic imaging potential and superior performance when investigating superfine bone structures and bone remodelling of biomaterials. Thus, fp-VCTs may be a suitable instrument for intraoperative imaging and future in vivo tissue-engineering studies.