Development of novel iron(III) crosslinked bioinks comprising carboxymethyl cellulose, xanthan gum, and hyaluronic acid for soft tissue engineering applications.

The advent of three-dimensional (3D) bioprinting offers a feasible approach to construct complex structures for soft tissue regeneration. Carboxymethyl cellulose (CMC) has been emerging as a very promising biomaterial for 3D bioprinting. However, due to the inability to maintain the post-printed stability, CMC needs to be physically blended and/or chemically crosslinked with other polymers. In this context, this study presents the combination of CMC with xanthan gum (XG) and hyaluronic acid (HA) to formulate a multicomponent bioink, leveraging the printability of CMC and XG, as well as the cellular support properties of HA. The ionic crosslinking of printed constructs with iron(III) via the metal-ion coordination between ferric cations and carboxylate groups of the three polymers was introduced to induce improved mechanical strength and long-term stability. Moreover, immortalized human epidermal keratinocytes (HaCaT) and human foreskin fibroblasts (HFF) encapsulated within iron-crosslinked printed hydrogels exhibited excellent cell viability (more than 95%) and preserved morphology. Overall, the presented study highlights that the combination of these three biopolymers and the ionic crosslinking with ferric ions is a valuable strategy to be considered for the development of new and advanced hydrogel-based bioinks for soft tissue engineering applications.

Graphene and metal-organic framework hybrids for high-performance sensors for lung cancer biomarker detection supported by machine learning augmentation.

Conventional diagnostic methods for lung cancer, based on breath analysis using gas chromatography and mass spectrometry, have limitations for fast screening due to their limited availability, operational complexity, and high cost. As potential replacement, among several low-cost and portable methods, chemoresistive sensors for the detection of volatile organic compounds (VOCs) that represent biomarkers of lung cancer were explored as promising solutions, which unfortunately still face challenges. To address the key problems of these sensors, such as low sensitivity, high response time, and poor selectivity, this study presents the design of new chemoresistive sensors based on hybridised porous zeolitic imidazolate (ZIF-8) based metal-organic frameworks (MOFs) and laser-scribed graphene (LSG) structures, inspired by the architecture of the human lung. The sensing performance of the fabricated ZIF-8@LSG hybrid sensors was characterised using four dominant VOC biomarkers, including acetone, ethanol, methanol, and formaldehyde, which are identified as metabolomic signatures in lung cancer patients' exhaled breath. The results using simulated breath samples showed that the sensors exhibited excellent performance for a set of these biomarkers, including fast response (2-3 seconds), a wide detection range (0.8 ppm to 50 ppm), a low detection limit (0.8 ppm), and high selectivity, all obtained at room temperature. Intelligent machine learning (ML) recognition using the multilayer perceptron (MLP)-based classification algorithm was further employed to enhance the capability of these sensors, achieving an exceptional accuracy (approximately 96.5%) for the four targeted VOCs over the tested range (0.8-10 ppm). The developed hybridised nanomaterials, combined with the ML methodology, showcase robust identification of lung cancer biomarkers in simulated breath samples containing multiple biomarkers and a promising solution for their further improvements toward practical applications.

Cytogenetic Characteristics of de novo Acute Myeloid Leukemia in Southern Vietnam.

BACKGROUND: The cytogenetic characteristics are important factors for risk stratification at diagnosis of acute myeloid leukemia (AML); however, cytogenetic profile of Vietnamese patients with AML remains undetermined. In this study, we present the chromosomal data of de novo AML patients in Southern Vietnam. METHODS: We performed cytogenetic testing for 336 AML patients using G banding. If the patients had suspected abnormalities, fluorescence in situ hybridization with probes of inv(3)(q21q26)/t(3;3)(q21;q26), 5q31, 7q31, t(8;21)(q21.3;q22), 11q23, t(15;17)(q24;q21), inv(16)(p13q22)/t(16;16)(p13;q22)were analyzed. Patients without above aberrations or with normal karyotype were tested by fluorescence in situ hybridization using probe 11q23. RESULTS: We found that the median age was 39 years. According to French - American - British classification, AML-M2 is the most frequent type with 35.1%. Chromosomal abnormalities were detected in 208 cases, accounting for 61.9%. Among structural abnormalities, t(15;17) was the most common (19.6%), followed by t(8;21) and inv (16)/t(16;16) in 10.1% and 6.2%, respectively. In perspective of chromosomal numerical abnornmalities, loss of sex chromosomes are the most common (7.7%), followed by +8 in 6.8%, -7/del(7q) in 4.4%, +21 in 3.9% and -5/del (5q) in 2.1%. The prevalence of addditional cytogenetic aberrations accompanying with t(8;21) and inv(16)/t(16;16) were 82.4% and 52.4%, repectively. None of +8 cases was associated with t(8;21). Regarding cytogenetic risk assessment according to European Leukemia Net 2017, there were 121 (36%) patients in favorable-risk, 180 (53.6%) in intermediate-risk and 35 (10.4%) in adverse-risk group. CONCLUSION: In conclusion, this is the first comprehensive cytogenetic profile of Vietnamese patients diagnosed with de novo AML, which helps clinical doctors in prognostic classification for AML patients in Southern Vietnam.

Magnetic enrichment of immuno-specific extracellular vesicles for mass spectrometry using biofilm-derived iron oxide nanowires.

Immuno-specific enrichment of extracellular vesicles (EVs) can provide important information into cellular pathways underpinning various pathologies and for non-invasive diagnostics, including mass spectrometry-based analyses. Herein, we report an optimised protocol for immuno-magnetic enrichment of specific EV subtypes and their subsequent processing with liquid chromatography-tandem mass spectrometry (LC-MS/MS). Specifically, we conjugated placental alkaline phosphatase (PLAP) antibodies to magnetic iron oxide nanowires (NWs) derived from bacterial biofilms and demonstrated the utility of this approach by enriching placenta-specific EVs (containing PLAP) from cell culture media. We demonstrate efficient PLAP+ve EV enrichment for both NW-PLAP and Dynabeads™-PLAP, with high PLAP protein recovery (83.7 ± 8.9% and 83.2 ± 5.9%, respectively), high particle-to-protein ratio (7.5 ± 0.7 × 109 and 7.1 ± 1.2 × 109, respectively), and low non-specific binding of non-target EVs (7 ± 3.2% and 5.4 ± 2.2%, respectively). Furthermore, our optimized EV enrichment and processing approach identified 2518 and 2545 protein groups with LC-MS/MS for NW-PLAP and Dynabead™-PLAP, respectively, with excellent reproducibility (Pearson correlation 0.986 and 0.988). These findings demonstrate that naturally occurring iron oxide NWs have comparable performance to current gold standard immune-magnetic beads. The optimized immuno-specific EV enrichment for LC-MS/MS method provides a low-cost and highly-scalable yet efficient, high-throughput approach for quality EV proteomic studies.

Low Risk of Occult Hepatitis B Infection among Vietnamese Blood Donors.

Occult hepatitis B infection (OBI) is characterized by the presence of low levels of hepatitis B virus (HBV) DNA and undetectable HBsAg in the blood. The prevalence of OBI in blood donors in Asia ranges from 0.013% (China) to 10.9% (Laos), with no data available from Vietnam so far. We aimed to investigate the prevalence of OBI among Vietnamese blood donors. A total of 623 (114 women and 509 men) HBsAg-negative blood donors were screened for anti-HBc and anti-HBs by ELISA assays. In addition, DNA from sera was isolated and nested PCR was performed for the HBV surface gene (S); a fragment of the S gene was then sequenced in positive samples. The results revealed that 39% (n = 242) of blood donors were positive for anti-HBc, and 70% (n = 434) were positive for anti-HBs, with 36% (n = 223) being positive for both anti-HBc and anti-HBs. In addition, 3% of blood donors (n = 19) were positive for anti-HBc only, and 34% (n = 211) had only anti-HBs as serological marker. A total of 27% (n = 170) were seronegative for any marker. Two of the blood donors (0.3%) were OBI-positive and sequencing revealed that HBV sequences belonged to HBV genotype B, which is the predominant genotype in Vietnam.

Enhanced Room-Temperature Ethanol Detection by Quasi 2D Nanosheets of an Exfoliated Polymeric Graphitized Carbon Nitride Composite-Based Patterned Sensor.

A novel room-temperature gas sensor composed of polymeric graphitic carbon nitride composite was fabricated and used for the detection of ethanol vapor under ambient conditions. Polymeric carbon nitride (PCN) microstructures composed of fluffy nanosheets were synthesized via a thermal polycondensation mechanism using melamine as the precursor, followed by vigorous chemical exfoliation. These sheet-like microstructures were employed as active materials in the form of composites, along with carbon paste consisting of graphite nanoplatelets and carbon black. The active sensing layer was fabricated on a PET sheet and assembled on an interdigitated gold electrode. The as-fabricated sensor exhibited excellent sensing efficiency (>100% response at 10 ppm) along with high selectivity and stability. In particular, for ultralow concentrations such as 1 ppm (>10% response), this resistive-based sensor exhibited a swift response time provided under ambient conditions. The exfoliated PCN composite sensor was found to be working with appreciable efficiency at moderate relative humidity (%) with the least fluctuation in response signals also demonstrating long-term stability for 30 days with consistent response signals.

New insights on energetic properties of graphene oxide (GO) materials and their safety and environmental risks.

Graphene oxide (GO) has been recognized as a thermally unstable and energetic material, but surprisingly its environmental and safety risks were not fully explored, defined, and regulated. In this study, systematic explosivity and flammability characterizations of commercial GO materials were conducted to evaluate the influence of key parameters such as physical forms (paste, powders, films, and aerogels), temperature, heating rate, mass, and heating environment, as well as their potential safety and environmental impacts. Results based on thermogravimetric analysis (TGA) showed that GO in paste and powder forms have lower temperature thresholds (>180-192 °C) to initiate micro-explosions compared to GO film and aerogels (> 205 °C and 213 °C) regardless of the environment (inert, air, or oxygen). The observed explosive behavior can be explained by thermal runaway reactions as a result of thermal deoxygenation and decomposition of oxygen functional groups. Flammability rating and limiting oxygen index (LOI) results confirmed that GO films are flammable materials that can spontaneously propagate flame in a low oxygen environment (~11 %). These results provided new insights about potential safety and environmental risks of GO materials, which somehow were not considered, suggesting urgent actions to improve current safety protocols for labeling, handling, transporting, and storage practices from manufacturers to the end-users.

SARS-CoV-2 viral dynamics of the first 1000 sequences from Vietnam and neighbouring ASEAN countries.

Objective: The regional distribution and transmissibility of existing COVID-19 variants of concern (VOC) has led to concerns about increasing transmission, given the ability of VOCs to evade immunity as breakthrough infections become more prevalent. Methods: SARS-CoV-2 genomes (n = 277) were sequenced and analysed alongside all available genomes from Vietnam and ASEAN countries to understand the phylodynamics. The observed lineages were assigned using Pangolin nomenclature, and spread patterns were investigated. Results: Between January and November 8, 2021, VOCs, including alpha (B.1.1.7), beta (B.1.351), gamma (P.1), and delta (B.1.617.2), were observed across the ASEAN countries. While alpha and delta were the major VOCs in nine ASEAN countries, delta was predominant. The alpha VOC was first reported by Singapore, beta by Malaysia, gamma by the Philippines, and delta by Singapore. Of the first 1000 genomes analysed from Vietnam, alpha and delta were the most represented, with delta being the dominant VOC from May 2021. The delta variant was introduced in early January 2021, and formed a large cluster within the representative genomes. Conclusion: Spatial and temporal monitoring of SARS-CoV-2 variants is critical to the understanding of viral phylodynamics, and will provide useful guidance to policy makers for infection prevention and control.

Fractal Design for Advancing the Performance of Chemoresistive Sensors.

The rapid advancement of internet of things (IoT)-enabled applications along with connected automation in sensing technologies is the heart of future intelligent systems. The probable applications have significant implications, from chemical process monitoring to agriculture, mining, space, wearable electronics, industrial manufacturing, smart cities, and point-of-care (PoC) diagnostics. Advancing sensor performance such as sensitivity to detect trace amounts (ppb-ppm) of analytes (gas/VOCs), selectivity, portability, and low cost is critical for many of these applications. These advancements are mainly achieved by selecting and optimizing sensing materials by their surface functionalization and/or structural optimization to achieve favorable transport characteristics or chemical binding/reaction sites. Surprisingly, the sensor geometry, shapes, and patterns were not considered as critical parameters, and most of these sensors were designed by following simple planar and interdigitated electrode geometry. In this study, we introduce a new bioinspired fractal approach to design chemoresistive sensors with fractal geometry, which grasp the architecture of fern leaves represented by the geometric group of space-filling curves of fractal patterns. These fractal sensors were printed by an extrusion process on a flexible substrate (PET) using specially formulated graphene ink as a sensing material, which provided significant enhancement of the active surface area to volume ratio and allowed high-resolution fractal patterning along with a reduced current transportation path. To demonstrate the advantages and influence of fractal geometry on sensor performance, here, three different kinds of sensors were fabricated based on different fractal geometrics (Sierpinski, Peano, and Hilbert), and the sensing performance was explored toward different VOC analytes (e.g., ethanol, methanol, and acetone). Among all these fractal-designed sensors including interdigitate sensors, the Hilbert-designed printed sensor shows enhanced sensing properties in terms of fast response time (6 s for 30 ppm), response value (14%), enhanced detection range (5-100 ppm), high selectivity, and low interference to humidity (up to RH 80%) for ethanol at room temperature (20 °C). Moreover, a significant improvement of this sensor performance was observed by applying the mechanical deformation (positive bending) technique. The practical application of this sensor was successfully demonstrated by monitoring food spoilage using a commercial box of strawberries as a model. Based on these presented results, this biofractal biomimetic VOC sensor is demonstrated for a prospective application in food monitoring.

Efficacy of laparoscopic-assisted pancreaticoduodenectomy in Vietnamese patients with periampullary of Vater malignancies: A single-institution prospective study.

INTRODUCTION: Minimally invasive pancreaticoduodenectomy is a technically complex technique, that is being used to treat periampullary malignancy. We provide our experience with laparoscopic-assisted pancreaticoduodenectomy (LAPD) with statistics on the outcomes of periampullary cancer patients. MATERIAL AND METHOD: Thirty patients underwent surgery between June 1, 2016 and May 30, 2020, with 21 undergoing classical PD and 9 undergoing pylorus-preserving pancreaticoduodenectomy (PPPD). Prospectively gathered data on surgical outcomes and long-term oncological results are given. RESULTS: The median operative time was 277.5 min (range, 258.7-330 min), and the median intraoperative estimated blood loss was 319.5 mL (range, 241.2-425 mL). The rate of conversion to OPD, surgical reintervention, and mortality was 20%, 13.3%, and 10% respectively. Cumulative surgery-related morbidity was 33.4%, including bleeding (n = 4), severe POPF (n = 4), biliary fistula (n = 1), DGE (n = 2), and intestinal obstruction (n = 1). Pathologic diagnoses were AoV cancer (n = 23), distal CBD cancer (n = 4), PDAC (n = 2), and AoV NET (n = 1). The mean survival time of the LAPD group was 29.9 months. The long-term survival time of the N0 group was 36.8 months, which was significantly longer than that of the N1 group. The long-term survival times of stages I-B, II-A, and II-B were 36.9, 26.5, and 15.7 months, respectively (p = 0.016). CONCLUSION: LAPD has a high rate of conversion to OPD, morbidity, and mortality. However, LPD is feasible technique for highly selected patients. Lymph node metastasis and stage of disease are the risk factors for long-term survival.

Converging 2D Nanomaterials and 3D Bioprinting Technology: State-of-the-Art, Challenges, and Potential Outlook in Biomedical Applications.

The development of next-generation of bioinks aims to fabricate anatomical size 3D scaffold with high printability and biocompatibility. Along with the progress in 3D bioprinting, 2D nanomaterials (2D NMs) prove to be emerging frontiers in the development of advanced materials owing to their extraordinary properties. Harnessing the properties of 2D NMs in 3D bioprinting technologies can revolutionize the development of bioinks by endowing new functionalities to the current bioinks. First the main contributions of 2D NMS in 3D bioprinting technologies are categorized here into six main classes: 1) reinforcement effect, 2) delivery of bioactive molecules, 3) improved electrical conductivity, 4) enhanced tissue formation, 5) photothermal effect, 6) and stronger antibacterial properties. Next, the recent advances in the use of each certain 2D NMs (1) graphene, 2) nanosilicate, 3) black phosphorus, 4) MXene, 5) transition metal dichalcogenides, 6) hexagonal boron nitride, and 7) metal-organic frameworks) in 3D bioprinting technology are critically summarized and evaluated thoroughly. Third, the role of physicochemical properties of 2D NMSs on their cytotoxicity is uncovered, with several representative examples of each studied 2D NMs. Finally, current challenges, opportunities, and outlook for the development of nanocomposite bioinks are discussed thoroughly.

Long- and short-term survival following laparoscopic and open pancreaticoduodenectomy for patients with periampullary tumors in Vietnam.

BACKGROUND: Laparoscopic pancreaticoduodenectomy (LPD) is a less invasive alternative to the traditional open pancreaticoduodenectomy (OPD) approach used to treat periampullary tumors. However, previous studies examining the advantages of this surgery over OPD have produced mixed results. Here, a retrospective observational approach was used to compare the short- and long-term outcomes of patients with periampullary tumors who underwent LPD or OPD at a single institution in Vietnam. MATERIALS AND METHODS: Data were obtained from hospital medical records collected over five years from patients that underwent OPD or LPD. Information on demographics, medical status, tumor characteristics, operative variables, complications, and mortality was examined. Survival curves were constructed and the stepwise multivariate Cox proportional hazard model was used to identify the factors associated with the risk of death following surgery. RESULTS: Eighty-four patients aged 26-80 years were included. Twenty-two patients underwent LPD and 62 received OPD. The operative time for the LPD group was significantly longer than that for the OPD group, and the LPD group was less likely to require a blood transfusion during surgery. While the short- and long-term survival rates did not differ for the procedures, the factors associated with the risk of death following surgery were tumors at the N1 stage and an age >65 years. CONCLUSION: Both LPD and OPD procedures for treating periampullary tumors exhibited comparable safety profiles, with similar short-term outcomes and long-term survival rates observed. Future studies with a larger sample size should be conducted to further examine the treatment outcomes following these surgical approaches.

Comparative antibacterial activity of 2D materials coated on porous-titania.

Plasma electrolytic oxidation (PEO) is a well-established technique for the treatment of titanium-based materials. The formed titania-PEO surface can improve the osseointegration properties of titanium implants. Nevertheless, it can not address bacterial infection problems associated with bone implants. Recently, 2-dimensional (2D) materials such as graphene oxide (GO), MXene, and hexagonal boron nitride (hBN) have received considerable attention for surface modifications showing their antibacterial properties. In this paper, a comparative study on the effect of partial deposition of these three materials over PEO titania substrates on the antibacterial efficiency and bioactivity is presented. Their partial deposition through drop-casting instead of continuous film coating is propsed to simultaneously address both antibacterial and osseointegration abilities. Our results demonstrate the dose-dependent nature of the deposited antibacterial agent on the PEO substrate. GO-PEO and MXene-PEO samples showed the highest antibacterial activity with 70 (±2) % and 97 (±0.5) % inactivation of S. aureus colonies in the low concentration group, respectively. Furthermore, only samples in the higher concentration group were effective against E. coli bacteria with 18 (±2) % and 17 (±4) % decrease in numbers of colonies for hBN-PEO and GO-PEO samples, respectively. Moreover, all antibacterial samples demonstrated acceptable bioactivity and good biocompatibility, making them a considerable candidates for the next generation of antibacterial titanium implants.

Outcomes of surgical management of peptic ulcer perforation using the falciform ligament: A cross-sectional study at a single centre in Vietnam.

INTRODUCTION: Peptic ulcer perforation (PUP) is one of the most common critical surgical emergencies. The omentum flap is commonly used to cover a PUP. However, the omentum cannot be used in cases of severe peritonitis or previous surgical removal. This is the first study conducted in Vietnam that was designed to analyse the outcomes of patients with PUPs who were treated using the falciform ligament. METHOD: In this study, we retrospectively identified 40 consecutive patients who were treated for PUP at a single high-volume centre in Vietnam from February 2018 to February 2021. Peptic ulcer perforation was measured during diagnostic evaluation based on preoperative imaging, such as X-ray, and CT scan. Patients who had malignancy, laparoscopic surgery, omentopexy and nonoperative treatment were excluded from this research. RESULTS: Forty patients were included; the mean age of the patients was 66.3 years (range 33-99 years), and some patients had comorbid disease (57.5%), hypertension (30%), diabetes (10%), cirrhosis (7.5%), and chronic renal failure (7.5%). The PUPs were located in the duodenum (80%), or the pyloric (15%) and prepyloric (5%) regions. The procedures used to treat the patients included duodenostomy (32.5%), gastrojejunostomy (37.5%), and antrum resection (2.5%). The average operative time was 88.6 min (45-180 min), hospital stay was 9.6 days (2-35 days), and oral intake was started at 4.1 days (3-8 days); additionally, the 30-day mortality (17.5%) and incidences of pneumonia (25%), multiorgan failure (15%), acute liver failure (5%), wound infection (7.5%), and ulcer peptic fistula (0%) were assessed. Univariate tests showed that an ASA ≥ III and comorbidities, such as pulmonary complications, liver failure and multiorgan failure, were associated with mortality. The multivariate test showed that multiorgan failure was the only factor related to mortality. CONCLUSION: The falciform ligament can be efficiently used for the closure of a PUP. Although there were no instances of complication with a reperforated peptic ulcer, the mortality rate was slightly highly related to severe comorbidities and postoperative multiorgan failure.

Highly Water Dispersible Functionalized Graphene by Thermal Thiol-Ene Click Chemistry.

Functionalization of pristine graphene to achieve high water dispersibility remains as a key obstacle owing to the high hydrophobicity and absence of reactive functional groups on the graphene surface. Herein, a green and simple modification approach to prepare highly dispersible functionalized graphene via thermal thiol-ene click reaction was successfully demonstrated on pristine graphene. Specific chemical functionalities (-COO, -NH2 and -S) on the thiol precursor (L-cysteine ethyl ester) were clicked directly on the sp2 carbon of graphene framework with grafting density of 1 unit L-cysteine per 113 carbon atoms on graphene. This functionalized graphene was confirmed with high atomic content of S (4.79 at % S) as well as the presence of C-S-C and N-H species on the L-cysteine functionalized graphene (FG-CYS). Raman spectroscopy evidently corroborated the modification of graphene to FG-CYS with an increased intensity ratio of D and G band, ID/IG ratio (0.3 to 0.7), full-width at half-maximum of G band, FWHM [G] (20.3 to 35.5) and FWHM [2D] (64.8 to 90.1). The use of ethanol as the reaction solvent instead of common organic solvents minimizes the chemical hazards exposure to humans and the environment. This direct attachment of multifunctional groups on the surface of pristine graphene is highly demanded for graphene ink formulations, coatings, adsorbents, sensors and supercapacitor applications.

3D bioprinting of a cell-laden antibacterial polysaccharide hydrogel composite.

Bioink with inherent antibacterial activity is of particular interest for tissue engineering application due to the growing number of bacterial infections associated with impaired wound healing or bone implants. However, the development of cell-laden bioink with potent antibacterial activity while supporting tissue regeneration proved to be challenging. Here, we introduced a cell-laden antibacterial bioink based on Methylcellulose/Alginate (MC/Alg) hydrogel for skin tissue engineering via elimination of the risks associated with a bacterial infection. The key feature of the bioink is the use of gallium (Ga+3) in the design of bioink formulation with dual functions. First, Ga+3 stabilized the hydrogel bioink by the formation of ionic crosslinking with Alg chains. Second, the gallium-crosslinked bioink exhibited potent antibacterial activity toward both Gram-positive (Staphylococcus aureus) and Gram-negative (Pseudomonas aeruginosa) bacteria with a bactericidal rate of 99.99 %. In addition, it was found that the developed bioink supported encapsulated fibroblast cellular functions.

Graphene ink for 3D extrusion micro printing of chemo-resistive sensing devices for volatile organic compound detection.

Printed electronic sensors offer a breakthrough in the availability of low-cost sensor devices for improving the quality of human life. Conductive ink is the core of printing technology and also one of the fastest growing sector among all ink industries. Among many developed conductive inks, graphene-based inks are especially recognized as very promising for future fabrication of devices due to their low cost, unique properties, and compatibility with various platforms such as plastics, textiles, and paper. The development of graphene ink formulations for achieving high conductivity and high resolution printing is highly realized in 2D inkjet printing. Unfortunately, the ongoing development of graphene inks is possibly hampered by the non-uniform particle size and structures (e.g., different shapes and number of layers), which adversely affect printing resolution, conductivity, adhesion, and structural integrity. This study presents an environmentally sustainable route to produce graphene inks specifically designed for 3D extrusion-printing. The application of the prepared ink is demonstrated by mask-free automatic patterning of sensing devices for the detection of volatile organic compounds (VOCs). The sensing devices fabricated with this new ink display high-resolution patterning (average height/thickness of ∼12 µm) and a 10-fold improvement in the surface area/volume (SA/V) ratio compared to a conventional drop casting method. The extrusion printed sensors show enhanced sensing characteristics in terms of sensitivity and selectivity towards trace amount of VOC (e.g. 5 ppm ethanol) at room temperature (20 °C), which highlights that our method has highly promising potential in graphene printing technology for sensing applications.

Multiple applications of bio-graphene foam for efficient chromate ion removal and oil-water separation.

This paper presents the synthesis of bio-graphene foams (bGFs) from renewable sources, and the application of bGFs as new adsorbents in removal of chromate ions and oil contaminants from waste water. A two-step synthetic method was developed to produce bGFs with unique porous architecture and high specific surface area (up to 805 m2 g-1) that is highly desirable for environmental applications. The adsorption performance of prepared bGFs for removal of chromate ions from water was studied in relation to CrO42- concentration, adsorbent load, pH, and contact time to confirm adsorption capacity, kinetics and pH dependence. The adsorption isotherms of chromate ions were consistent with the Langmuir model, revealing an outstanding adsorption capacity of 245 mg of Cr(VI)/g bGFs (pH∼7). bGFs were capable of reducing Cr(VI) in water below the maximum permissible level (0.050 mg dm-3) for human consumption (WHO). In a second application, our results convincingly showed excellent performance of bGFs in separating organic solvents and oils from water in a continuous oil-water separation process showing 99.1% and 98.8% separation efficiency for toluene and petroleum, respectively. Our findings confirm that the outstanding performance of bGFs, and suggest their use as efficient adsorbents for environmental remediation.

A Unique Synthesis of Macroporous N-Doped Carbon Composite Catalyst for Oxygen Reduction Reaction.

Macroporous carbon materials (MCMs) are used extensively for many electrocatalytic applications, particularly as catalysts for oxygen reduction reactions (ORRs)-for example, in fuel cells. However, complex processes are currently required for synthesis of MCMs. We present a rapid and facile synthetic approach to produce tailored MCMs efficiently via pyrolysis of sulfonated aniline oligomers (SAOs). Thermal decomposition of SAO releases SO2 gas which acts as a blowing agent to form the macroporous structures. This process was used to synthesise three specifically tailored nitrogen (N)-doped MCM catalysts: N-SAO, N-SAO (phenol formaldehyde) (PF) and N-SAO-reduced graphene oxide (rGO). Analysis using Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the formation of macropores (100-350 µm). Investigation of ORR efficacy showed that N-SAOPF performed with the highest onset potential of 0.98 V (vs. RHE) and N-SAOrGO showed the highest limiting current density of 7.89 mAcm-2. The macroporous structure and ORR efficacy of the MCM catalysts synthesised using this novel process suggest that this method can be used to streamline MCM production while enabling the formation of composite materials that can be tailored for greater efficiency in many applications.