Deconvolution procedure of the UV-vis spectra. A powerful tool for the estimation of the binding of a model drug to specific solubilisation loci of bio-compatible aqueous surfactant-forming micelle.

UV-vis-spectra evolution of Nile Red loaded into Tween 20 micelles with pH and [Tween 20] have been analysed in a non-conventional manner by exploiting the deconvolution method. The number of buried sub-bands has been found to depend on both pH and bio-surfactant concentration, whose positions have been associated to Nile Red confined in aqueous solution and in the three micellar solubilisation sites. For the first time, by using an extended classical two-pseudo-phases-model, the robust treatment of the spectrophotometric data allows the estimation of Nile Red binding constant to the available loci. Hosting capability towards Nile Red is exalted by the pH enhancement. Comparison between binding constant values classically evaluated and those estimated by the deconvolution protocol unveiled that overall binding values perfectly match with the mean values of the local binding sites. This result suggests that deconvolution procedure provides more precise and reliable values, which are more representative of drug confinement.

Montmorillonite nanodevices for the colon metronidazole delivery.

The adsorption profiles of the antibiotic metronidazole (MNE) into the K10-montmorillonite (MMT-K10) clay and the subsequent release have been investigated as a function of pH and MNE/MMT-K10 ratio, in order to evaluate the potential of the MNE/MMT-K10 hybrids as controlled drug delivery system. The adsorption mechanism has been first elucidated by performing complementary equilibrium and kinetic studies and through the X-ray diffractometry (XRD) characterization of the obtained composite materials. The gathered results allowed us to propose a mechanism consisting of a multi-step pathway involving the neutral and the cationic form of the drug, which interact with different sites of the clay surfaces, i.e. the interlayer region and the faces of the lamella. In a second step the drug release kinetics has been studied under physiological pH mimicking conditions simulating the oral drug administration and delivery. For the sake of comparison the commercial formulation has also been employed for the release studies. The investigation of the release profiles and the comparison with the commercial formulation of the drug reveal that the new-tailor made formulation could be fruitful exploited for successfully prolonged the action of drug in the desired site.

Mononuclear rearrangement of heterocycles in zwitterionic micelles of amine oxide surfactants.

Rate constants for the mononuclear rearrangement (MRH) of Z-phenylhydrazones of some 5-substituted-3-benzoyl-1,2,4-oxadiazoles in water have been measured in the presence of zwitterionic micelles. The use of micellized N-tetradecyl-N,N-dimethylamineoxide (C(14)DMAO) as the reaction medium allowed to solubilize the otherwise water-insoluble oxadiazoles. Micellar rate effects were analyzed by using a simple pseudo-phase model and compared with those obtained in non-ionic micelles (Triton X-100). Evidence that both the rate of the rearrangement reaction and the binding of the substrates to the micelles are mainly governed by substrate hydrophobicity is obtained. The disagreement with the primarily sterically controlled MRH in Triton X-100 micelles highlights large and intriguing differences between the two micellar environments.

Peculiar mechanism of solubilization of a sparingly water soluble drug into polymeric micelles. Kinetic and equilibrium studies.

Complementary kinetic and equilibrium studies on the solubilization process of the sparingly water soluble tamoxifen (TAM) drug in polymeric aqueous solutions have been performed by using the spectrophotometric method. In particular, the amphiphilic copolymers obtained by derivatization of polymeric chain of poly(N-2-hydroxyethyl)-dl-aspartamide, PHEA, with poly(ethylene glycol)s, PEG (2000 or 5000 Da), and/or hexadecylamine chain, C16, namely PHEA-PEG2000-C16, PHEA-PEG5000-C16, PHEA-C16, have been employed. Preliminary to the kinetic and equilibrium data quantitative treatment, the molar absorption coefficient of TAM in polymeric micelle aqueous solution has been determined. By these studies the solubization sites of TAM into the polymeric micelles have been determined and the solubilization mechanism has been elucidated through a nonconventional approach by considering the TAM partitioned between three pseudophases, i.e., the aqueous pseudophase, the hydrophilic corona, and the hydrophobic core. The simultaneous solution of the rate laws associated with each step of the proposed mechanism allowed the calculation of the rate constants associated with the involved processes, the values of which are independent of both the copolymer concentration and nature, with the exception of the rate of the TAM transfer from the corona to the core. This has been attributed to the steric barrier, represented by the corona, which hampers the solubilization into the core. The binding constant values of the TAM to the hydrophilic corona of the polymeric micelles, calculated through the quantitative analysis of the equilibrium data, depend on the thickness of the hydrophilic headgroup, while those of the hydrophobic core are almost independent of the copolymer type. Further confirmation to the proposed solubilization mechanism has been provided by performing the kinetic and equilibrium measurements in the presence of PHEA-PEG2000 and PHEA-PEG5000 copolymers.

Partition of indicaxanthin in membrane biomimetic systems. A kinetic and modeling approach.

The solubilization site of indicaxanthin (Ind) in lipid bilayers was investigated by the kinetics of Ind oxidation by peroxyl radicals in water and in aqueous/L-alpha-dipalmitoyl-phosphatidylcholine (DPPC) vesicles, pH 7.4, and 37.0 and 48.0 degrees C, that is, in a gel-like and a crystal liquidlike bilayer state, respectively. The time-dependent Ind absorbance decay, matched with a successful simulation of the reaction kinetic mechanism by Gepasi software, supported a multistep pathway. Computer-assisted analysis allowed calculation of the rate constants associated with the reactions involved, the values of which decreased with increasing DPPC concentration. The binding constant calculated according to a pseudo two-phase distribution model did not vary with the physicochemical state of the vesicle, indicating location of Ind in a region whose state is not affected by temperature changes, at the interface between hydrophobic core and hydrophilic head groups. Other measurements carried out in the presence of dimyristoyl-phosphatidylcholine vesicles, indicated that the phytochemical was confined to the aqueous phase.

Nonlinear response of a batch BZ oscillator to the addition of the anionic surfactant sodium dodecyl sulfate.

The response of the Belousov-Zhabotinsy (BZ) system to the addition of increasing amounts of the anionic surfactant sodium dodecyl sulfate (SDS) was monitored at 25.0 degrees C in stirred batch conditions. The presence of SDS in the reaction mixture influences the oscillatory parameters, i.e., induction period and oscillation period, to an extent that depends on the surfactant concentration. The experimental results have shown that the induction period increases slightly on increasing surfactant concentration and, then, a further increase in the [SDS] leads to an enhancement while the oscillation period increases monotonously on increasing SDS concentration. It has been proposed that the response of the oscillatory BZ system to the addition of SDS is due to the peculiar capability of the organized surfactant assemblies to affect the reactivity by selectively sequestering some key reacting species. Indeed, explanations of the experimental results have been given on the basis of the role played by the micellar shape, which in turn dictates the hydrophobic nature. The suggested perturbation effects have been supported by performing viscosity measurements on the aqueous SDS solutions and by the spectrophotometric estimation of the binding constant of the bromine species to the micellar aggregates. This study has indirectly corroborated the existence of two kind of micelles and unambiguously revealed that the bromine species show a different affinity toward the spherical and rod-like micelles.

Evidence for the existence of an effective interfacial tension between miscible fluids: isobutyric acid-water and 1-butanol-water in a spinning-drop tensiometer.

We report definitive evidence for an effective interfacial tension between two types of miscible fluids using spinning-drop tensiometry (SDT). Isobutyric acid (IBA) and water have an upper critical solution temperature (UCST) of 26.3 degrees C. We created a drop of the IBA-rich phase in the water-rich phase below the UCST and then increased the temperature above it. Long after the fluids have reached thermal equilibrium, the drop persists. By plotting the inverse of the drop radius cubed (r(-)(3)) vs the rotation rate squared (omega(2)), we confirmed that an interfacial tension exists and estimated its value. The transition between the miscible fluids remained sharp instead of becoming more diffuse, and the drop volume decreased with time. We observed droplet breakup via the Rayleigh-Tomotika instability above the UCST when the rotation rate was decreased by 80%, again demonstrating the existence of an effective interfacial tension. When pure IBA was injected into water above the UCST, drops formed inside the main drop even as the main drop decreased in volume with time. We also studied 1-butanol in water below the solubility limit. Effective interfacial tension values measured over time were practically constant, while the interface between the two phases remains sharp as the volume of the drop declines. The effective interfacial tension was found to be insensitive to changes in temperature and always larger than the equilibrium interfacial tension. Although these results may not apply to all miscible fluids, they clearly show that an effective interfacial tension can exist and be measured by SDT for some systems.