Hepatitis B in Healthcare Personnel: An Update on the Global Landscape.

Despite the outstanding progress that has been made in the prevention, detection, and management of hepatitis B during the past decades, hepatitis B remains a problem among healthcare personnel (HCP) in many countries. We reviewed studies on all aspects of hepatitis B in HCP published from 2017 through April 2023. They revealed wide variations on the prevalence of infection among HCP, ranging from 0.6% in Europe to >8.7% in Africa, almost always in association with very low vaccination rates. Many studies found a significant association between HCP's knowledge about hepatitis B and hepatitis B vaccines, their vaccination status, and practices. This research also discloses global inequities regarding vaccination policies against hepatitis B, free-of-charge vaccinations, and access to post-exposure prophylaxis (PEP). Strategies to prevent and manage accidental exposures are needed in order to reduce the burden of hepatitis B on HCP, while written policies for all aspects of infection prevention, protective equipment, and PEP should be available. Lastly, HCP should be accordingly educated. These are all imperative given the decline of routine vaccinations in the COVID-19 era, particularly in countries with fragile vaccination programs, and the disruptions of interventions for hepatitis B that are expected to provide a pool of virus transmission to future generations.

Zirconia Nanoparticles as Reinforcing Agents for Contemporary Dental Luting Cements: Physicochemical Properties and Shear Bond Strength to Monolithic Zirconia.

Nanofillers in resin materials can improve their mechanical and physicochemical properties. The present work investigated the effects of zirconia nanoparticles (NPs) as fillers in commercial dental luting cements. Two dual-cured self-adhesive composites and one resin modified glass ionomer (RMGI) luting cement were employed. Film thickness (FT), flexural strength (FS), water sorption (Wsp), and shear bond strength (SBS) to monolithic zirconia were evaluated according to ISO 16506:2017 and ISO 9917-2:2017, whereas polymerization progress was evaluated with FTIR. Photopolymerization resulted in double the values of DC%. The addition of 1% wt NPs does not significantly influence polymerization, however, greater amounts do not promote crosslinking. The sorption behavior and the mechanical performance of the composites were not affected, while the film thickness increased in all luting agents, within the acceptable limits. Thermocycling (TC) resulted in a deteriorating effect on all composites. The addition of NPs significantly improved the mechanical properties of the RMGI cement only, without negatively affecting the other cements. Adhesive primer increased the initial SBS significantly, however after TC, its application was only beneficial for RMGI. The MDP containing luting cement showed higher SBS compared to the RMGI and 4-META luting agents. Future commercial adhesives containing zirconia nanoparticles could provide cements with improved mechanical properties.

Air Quality in Dental Care Facilities: Update to Current Management and Control Strategies Implementing New Technologies: A Comprehensive Review.

The quality of indoor air in healthcare facilities, with an emphasis on dental offices, attracted the attention of the scientific community in the late 1960s. Since then, it has become evident that the indoor air quality is critical in modern dental care facilities for limiting the spread of airborne infections, including vaccine-preventable diseases, and a key component of safety for healthcare personnel and patients. In the past decades, the role of indoor air quality has also been recognized in non-healthcare facilities, given the increasing time spent indoors by humans. During the provision of dental care services, mainly in the field of restorative dentistry, high-speed dental handpieces emitting air and water are used, producing large quantities of aerosol and hovering inside the operations area. In modern dental offices, new devices emitting air/powder for cavities improvement and cleaning as well as for periodontal prophylactic cleaning and aesthetics are used. In addition, a new therapeutic protocol for the removal of bacterial biofilm, targeting treatment for peri-implant diseases and conditions using air-abrasive decontamination technology, has been introduced in daily dental practice. The aim of this non-systemic review is to present the current state of knowledge on the nature and dynamics of air splatters and to provide an update to management and control strategies in dental care facilities, focusing on air purification and ultraviolet devices proposed and used. The findings arising from the limited number of related published articles documenting the reduction in levels of particular matter 2.5 (PM2.5), PM10 and volatile organic compounds, allow us to conclude that the continuous operation of air purifiers during and after treatment, contributes considerably to the improvement of the indoor air quality in dental care facilities. Moreover, the utilization of air purifiers is highly recommended in dental practice to mitigate spread of infections, including vaccine-preventable diseases. Frequent cleaning and maintenance of the purifier sieves and filters and frequent renovation of the indoor air through physical ventilation by mean of open windows is imperative. More research on environmental contamination and particularly on viral contamination under real dental care conditions is needed.

Influence of Laser Irradiation Settings, during Diode-Assisted Endodontics, on the Intraradicular Adhesion of Self-Etch and Self-Curing Luting Cement during Restoration-An Ex Vivo Study.

Background: Diode-assisted endodontics is nowadays utilized for pulp space disinfection, but little is known on the bonding potential of this lased root dentin when the tooth is restored with an intracanal polymer post. Objectives: to investigate the influence of diode laser irradiation settings, in laser-assisted endodontics, on the intraradicular bonding of composite materials. Methods: Sixteen two-rooted, maxillary first premolars were collected, prepared up to F4 (Protaper Universal. Dentsply-Maillefer, Ballaigues, Switzerland), and randomly assigned in two groups: group A (chopped mode or short pulse), diode irradiated according to protocol, pulse 25 ms, power 2.5 W, and group B (microchopped mode or ultrashort pulse), pulse 25 µs, peak power 12 W (both groups GentleRay. KaVo Dental, Biberach an der Riss, Germany). Buccal canals were irradiated, palatal ones served as controls. Canals were then obturated, post space was created in all canals, and quartz-fiber posts (ICE light Danville. Danville Materials, San Ramon, CA, USA) were cemented by self-etch self-curing cement (Max Cem Elite. Kerr, West Collins Orange, CA, USA) (Max Cem Elite. Kerr, Brea, CA, USA). A week later, teeth were sectioned horizontally in 1 mm increments. Push-out test was conducted in a Zwick testing machine (Zwick Roell, Ulm, Germany) at 1 mm/min speed, and the force required to dislodge the post from each specimen (F-max) was recorded. Weibull regression models were applied for statistical analyses. Results: Differences in F-max by group (control vs. chopped mode vs. microchopped mode) and height (meaning the apical-to-coronal position of each specimen along the root) were statistically significant (p < 0.05 in all cases). Conclusions: Short pulses (or chopped mode) had a profound positive effect on the quality of intraradicular bonding, while Ultrashort pulses (or microchopped mode) affected it negatively. In addition, apically positioned bonding proved weaker compared with more coronally located specimens.

Attitudes toward Vaccinations and Vaccination Coverage Rates among Dental Students in Greece.

Our aim was to study attitudes toward vaccinations, full vaccination rates and susceptibility rates against vaccine-preventable diseases among students attending a University Dental School. A total of 134 students were studied. Full vaccination rates were as follows: 56.5% against measles and mumps, 70.6% against rubella, 32.3% against varicella, 44.1% against hepatitis A, 45.9% against hepatitis B, and 87.7% against COVID-19. In the past decade, 63.2% of students had received a booster shot against tetanus-diphtheria, 47.8% against pertussis, and 28.1% against poliomyelitis, while 29.4% of students had been vaccinated against influenza in the past year. Susceptibility rates were 40.4% for measles, 42.4% for mumps, 28.3% for rubella, 32.3% for varicella, 55.3% for hepatitis A, 54.1% for hepatitis B, 36.8% for tetanus-diphtheria, 52.2% for pertussis, and 71.9% for poliomyelitis. Overall, 123 (91.8%) students favored mandatory vaccinations, mainly for all dentists (88.4%), while 11.6% of students favored them only for dentists who provide care to high-risk patients. In conclusion, most dental students favored mandatory vaccinations, yet we found significant vaccination gaps and susceptibility rates against vaccine-preventable diseases. Vaccinations for dental students should be intensified. A national vaccination registry for healthcare personnel including dental students is urgently needed.

Circular Economy in Conjunction with Treatment Methodologies in the Biomedical and Dental Waste Sectors.

In this review, life cycle assessment (LCA) principles are coupled with circular economy (CE) in order to address LCA examples in the biomedical sector worldwide. The objectives were (1) to explore the application of LCA in the medical, pharmaceutical, and dental fields; (2) to describe the ways of biomedical waste management; (3) to emphasize on the problem of dental waste in private and public dental sectors; and (4) to propose ways of "green circulation" of the dental waste. A literature search was performed using the Google Scholar, PubMed, and Scopus search engines covering the period from January 2000 until May 2020, corresponding to articles investigating the LCA and circular economy principles and legislation for biomedical and dental waste, their management options, and modern ways of recycling. The results showed that incineration seems to be the best management way option involved despite the mentioned drawbacks in this technology. Different adopted models are well defined for the dental field based on the 3Rs' module (reduce, reuse, recycle). Replacing disposable products with reusable ones seems to be a good way to tackle the problem of waste in medical and dental sectors. Interventions on the selection and better biomedical and dental waste management will ensure eco-medicine and eco-dentistry of the future. These new terms should be the new philosophies that will change the way these fields operate in the future for the benefit of the professionals/patients and the community. Supplementary Information: The online version contains supplementary material available at 10.1007/s43615-020-00001-0.

Sol-Gel Synthesis and Characterization of YSZ Nanofillers for Dental Cements at Different Temperatures.

BACKGROUND: Yttria-stabilized zirconia nanoparticles can be applied as fillers to improve the mechanical and antibacterial properties of luting cement. The aim of this study was to synthesize yttria-stabilized zirconia nanoparticles by the sol-gel method and to investigate their composition, structure, morphology and biological properties. METHODS: Nanopowders of ZrO2 7 wt% Y2O3 (nY-ZrO) were synthesized by the sol-gel method and were sintered at three different temperatures: 800, 1000 and 1200 °C, and their composition, size and morphology were investigated. The biocompatibility was investigated with human gingival fibroblasts (hGFs), while reactive oxygen species (ROS) production was evaluated through fluorescence analysis. RESULTS: All synthesized materials were composed of tetragonal zirconia, while nanopowders sintered at 800 °C and 1000 °C additionally contained 5 and 20 wt% of the cubic phase. By increasing the calcination temperature, the crystalline size of the nanoparticles increased from 12.1 nm for nY-ZrO800 to 47.2 nm for nY-ZrO1200. Nano-sized particles with good dispersion and low agglomeration were received. Cell culture studies with human gingival fibroblasts verified the nanopowders' biocompatibility and their ROS scavenging activity. CONCLUSIONS: the obtained sol-gel derived nanopowders showed suitable properties to be potentially used as nanofillers for dental luting cement.

Air Quality in a Dental Clinic during Er:YAG Laser Usage for Cavity Preparation on Human Teeth-An Ex-Vivo Study.

Chemical air pollution in dental clinics consists of the emission of gases and particulate matter (PM), both generated by dental equipment and tooth tissues. One basic application of Erbium Laser devices is cavity preparation on human teeth due to its strong affinity to water and hydroxyapatite. The objective of this study was the evaluation of indoor air quality during the application of an Er:YAG laser, as a dentin removal instrument, in a Dental Clinic. Particulate Matter (PM) was measured using the standard method of EN legislation. In order to measure total Volatile Organic compounds (VOCs), a portable monitor was used. In the first experiment, PM10 and PM2.5 concentrations were increased by approximately 10 and 15 times, respectively. From the second experiment it can be concluded that neither of the measured particle concentrations exceeded the recommended indoor limit values while windows were open, although laser influence was still detectable. Within the limitations applied herein, it was found that Er:YAG laser activity for hard dental tissue removal was associated with high PM and TVOCs concentration values in the working environment, under insufficient or no ventilation. Physical ventilation in the aforementioned setting proved to be an important key factor in improving air quality, as both PM and TVOCs concentrations decreased significantly.

Effect of Water Storage on Hardness and Interfacial Strength of Resin Composite Luting Agents Bonded to Surface-Treated Monolithic Zirconia.

BACKGROUND: Durable bonding between resin composite luting agents (CLA) and zirconia is still a matter of controversy. The purpose of this study was to evaluate the effect of water storage on hardness and interfacial strength of three CLA, a non-adhesive (Multilink Automix/ML), an adhesive (Panavia F 2.0/PF) and a self-adhesive (PermaCem 2.0/PC), bonded to polished (CL) and grit-blasted (AL: 50 µm alumina, SJ: Sil-Jet + Monobond Plus silane) monolithic zirconia surfaces. METHODS: CLA specimens (n = 5/cement, condition) were prepared, stored under dry conditions or immersed in water, and Vickers hardness (VH) measurements were obtained at 1 h, 24 h, 1 week and 3 weeks intervals. Optical profilometry was used to determine the roughness parameters (Sa, Sz, Sdr, Sci) of zirconia surfaces (n = 5/treatment). A shear strength test (SBS, n = 10 × 2/cement) was performed to assess the strength and fractography of the cements bonded to zirconia after isothermal water storage and thermal-cycling (TC). RESULTS: PF demonstrated significantly lower VHN after water storage at all time intervals, PC at 1 w, 3 w and ML at 3 w. SJ and AL showed significantly higher values from CL in all roughness parameters. Weibull analysis revealed the following significance in σο ranking within the same material: AL, SJ, ALTC > SJTC, CL > CLTC (PF); SJ, SJTC, AL, ALTC > CL, CLTC (PC) and SJ, SJTC > AL > ALTC > CL, CLTC (ML). Within the same surface treatment subgroups, the significance in σo ranking was PC, ML > PF (before/after TC) for SJ; PC > PF > ML (before TC), PC, PF > ML (after TC) for AL, and PC > PF > ML (before/after TC) for CL. For the m ranking, the only significant difference within each material group was found in PC (AL > ALTC) and for the same surface treatment in AL (PC > ML). CONCLUSION: There are significant differences in the water plasticization susceptibility of the CLA tested; the materials with adhesive monomers were the most affected. Tribo-chemical silica coating combined with a silane coupling agent was the most efficient bonding treatment for the non-adhesive and the self-adhesive materials. The adhesive CLA performed better on alumina-blasted than on tribo-chemically coated surfaces.

Indoor Air Quality Evaluation Using Mechanical Ventilation and Portable Air Purifiers in an Academic Dentistry Clinic during the COVID-19 Pandemic in Greece.

The coronavirus disease 2019 (COVID-19), which is mainly transmitted through droplets without overlooking other sources of transmission, rendered attention on the air quality in indoor areas and more specifically in healthcare settings. The improvement of indoor air quality (IAQ) is ensured by frequent changes of the air that must be carried out in healthcare areas and with assistance from special devices that undertake the filtration of the air and its purification through special filters and lamps. In this research, the performance of air purifiers is assessed in terms of the limitation of PM2.5, PM10, VOCs and CO2 in a postgraduate clinic of the Dentistry School of the National and Kapodistrian University of Athens in parallel with mechanical ventilation. Our findings indicate that the use of mechanical ventilation plays a key role on the results, retaining good IAQ levels within the clinic and that air purifiers show a positive impact on IAQ by mainly reducing the levels of PM2.5 and secondly of TVOC.

The Use of Lasers in Dental Materials: A Review.

Lasers have been well integrated in clinical dentistry for the last two decades, providing clinical alternatives in the management of both soft and hard tissues with an expanding use in the field of dental materials. One of their main advantages is that they can deliver very low to very high concentrated power at an exact point on any substrate by all possible means. The aim of this review is to thoroughly analyze the use of lasers in the processing of dental materials and to enlighten the new trends in laser technology focused on dental material management. New approaches for the elaboration of dental materials that require high energy levels and delicate processing, such as metals, ceramics, and resins are provided, while time consuming laboratory procedures, such as cutting restorative materials, welding, and sintering are facilitated. In addition, surface characteristics of titanium alloys and high strength ceramics can be altered. Finally, the potential of lasers to increase the adhesion of zirconia ceramics to different substrates has been tested for all laser devices, including a new ultrafast generation of lasers.

Novel Femto Laser Patterning of High Translucent Zirconia as an Alternative to Conventional Particle Abrasion.

BACKGROUND: currently applied surface treatments for zirconia bonding may create undesired microcracks and surface flaws. The aim of the present study was to evaluate the efficacy of alternative surface treatments on the shear bond strength of high translucency zirconia to 10-Methacryloyloxydecyl dihydrogen phosphate (MDP)-containing resin-based cement. METHODS: fifty disk-shaped specimens (10 mm × 5 mm) were fabricated from a commercial yttria-stabilized zirconia with 5 mole% yttrium oxide tetragonal zirconia polycrystal (5Y-TZP), and underwent air-abrasion with alumina particles (50 µm-AL50 and 90 µm-AL90), glass beads (GB 10-60 µm), and ablation with femtosecond laser (FEMTO). Shear bond strength was evaluated with a universal testing machine under a crosshead speed of 0.5 mm/min until fracture. Fracture type was evaluated with an optical stereomicroscope. Differences among groups were evaluated by one-way ANOVA and Bonferroni pairwise comparison tests (p < 0.05). RESULTS: the highest shear bond strength values were presented by the laser treated group (23.97 ± 3.7 MPa). No statistically significant differences were found among the Cl, Al50, Al90 and FEMTO groups. The lowest mean value was presented by the glass-beads treated group (11.93 ± 2.88 MPa) which was significantly lower compared to all other groups (p < 0.001). CONCLUSIONS: under the limitations of this in vitro study, femtosecond laser treatment of High-translucent monolithic zirconia (HTZ) ceramics is a promising alternative method for the mechanical retention of resin cements.

Preparing dental schools to refunction safely during the COVID-19 pandemic: an infection prevention and control perspective.

In late 2019 a novel coronavirus named severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) emerged in China and spread throughout the world over a short period of time causing a pandemic of a respiratory disease named coronavirus disease 2019 (COVID-19). SARS-CoV-2 is easily transmitted from person to person through respiratory droplets and direct contact. The scarce available data indicate that dental healthcare personnel are at increased risk for acquisition of infection. Following the lockdown lifting, dental schools should be prepared to refunction safely and provide essential educational and healthcare services while protecting their students, patients, and personnel. The generation of aerosols in dental practice, in association with the high-transmissibility of SARS-CoV-2 through aerosol-generation procedures, the simultaneous provision of dental services to patients in the same areas, and the fact that asymptomatic and pre-symptomatic infected persons may transmit the virus, render the implementation of specific infection prevention and control measures imperative for dental schools. Herein we review the few evidence-based data available to guide infection prevention and control measures for COVID-19 in dental schools.

Surface characterization of monolithic zirconia submitted to different surface treatments applying optical interferometry and raman spectrometry.

This study evaluated roughness parameters and phase transformation of monolithic zirconia ceramics after various mechanical and laser thermal treatments. Fully sintered monolithic zirconia cylinder specimens were divided to five groups, according to the applied surface treatment: CL: control, GB: grit-blasted with glass particles. AL50: grit-blasted with 50 µm alumina particles, AL90: grit-blasted with 90 µm dyed-alumina particles and FEML: subjected to femto laser thermal treatment. Six roughness parameters (Sa, Sq, Sz, Sci, Svi and Sdr) were measured by optical profilometry. Phase transformation in zirconia was determined by micro-Raman spectroscopy. The highest roughness values were recorded in AL90 and FEML groups, followed by AL50. AL90 presented statistically higher monoclinic phase content compared to all other groups. Control and GB groups presented similar roughness without phase transformation. Laser thermal treatment causes minimal destruction of the zirconia surface, and can be suggested as an alternative to other roughening treratments, for enhancing the adhesive potential to dentin.

Bonding of Core Build-Up Composites with Glass Fiber-Reinforced Posts.

The purpose of this study was to investigate the bonding capacity of composite core build-up materials with prefabricated glass fiber-reinforced posts possessing different coronal morphologies. Five post types (Archimede Line (ARL), Fibrekleer (FBK), Glassix (GLX), Matrix Plus (MTP), and ParaPost White (PRW) and three core build-up materials (ClearfilPhoto Core (CPC), ClearfilDC Core (CDC), ClearfilNew Bond (CNB) of different curing modes (light-, self-, dual-cured respectively) were selected. The coronal part was embedded in the core build-up materials and the specimens were loaded under tensile force up to failure. The reliability (ß) and characteristic life (σο, in Ν) of the debonding force were evaluated by Weibull statistics and the debonded specimens were subjected to failure mode analysis. The results showed that ARL, MPT posts were the most and GLX the least retentive, despite the core build-up material used. CPC provided the highest retention with four posts (FBK, GLX, MTP, and PRW), without statistically significant differences from CDC in two (FBK and MTP) and CNB in one (PRW). CPC and CDC were the most reliable core materials for two posts (ARL and PRW), with no statistically significant difference from CNB in three (FBK, GLX, and MTP). GLX and PRW demonstrated the highest (93%) incidence of post detachment from core, whereas FBK demonstrated the highest percentage of core material fracture, with most fractures occurring in CDC (57%). Post fractures were most prominent in MTP when combined with CNB. The presence of specific coronal retentive features did not essentially ensure increased strength with the core material, due to their delamination.

The effects of the financial crisis on the general and dental health status of Greek citizens.

PURPOSE: To present the impact of the financial crisis on health status and dental health in Greece and compare it to the European Union and Finland and to identify any changes in health-related expenditure focusing on pharmaceutical expenditure and generic medicines. DESIGN/METHODOLOGY/APPROACH: Databases as Scopus, Pubmed, Google Scholar, World Health Organization, Eurostat, and Elstat were used. FINDINGS: Indicators, such as mortality and life expectancy, show that there is no clear correlation between health deterioration and financial crisis while dental health has deteriorated. Out-of-pocket expenses were found to be catastrophic, and the use of generic medicines is still limited. PRACTICAL IMPLICATIONS: Proper prescribing of medicines, coverage of health care costs by the government, and cost savings from the use of generic medicines were implemented. As regards dental care, the state should focus on prevention as well as reinforcement of public dental care services. ORIGINALITY/VALUE: The break through idea is to compare the impact of the financial crisis on health indexes in Greece with the European Union and Finland, to focus on pharmaceutical expenditure, generic medicines, and dental health.

Is there a potential for durable adhesion to zirconia restorations? A systematic review.

STATEMENT OF PROBLEM: With a number of zirconia ceramic materials currently available for clinical use, an overview of the scientific literature on the adhesion methods and their potential influence is indicated. PURPOSE: The purpose of this systematic review was to classify and analyze the existing methods and materials proposed to improve adhesion to zirconia surfaces. MATERIAL AND METHODS: The current literature of in vitro studies examining the bond strength on zirconia ceramics, including clinical studies from 1998 until 2014, was analyzed. A search of the English language literature was undertaken using MEDLINE and PubMed, and a hand search was made for any relevant research paper from the library of a dental school. Papers evaluating only alumina restoration bond or ceramic-zirconia bond were excluded. RESULTS: A total of 134 publications were identified for analysis. Different adhesive techniques with different testing methods were reviewed. Results were difficult to compare in that the parameters varied in each research protocol. CONCLUSIONS: Airborne-particle abrasion and tribochemical silica coating are reference pretreatment methods. Adhesive monomers are necessary for chemical bonding. Surface contamination and aging have negative effects on adhesion to zirconia. Many factors influence each combination of zirconia material, such as surface treatment, adhesive medium, and aging conditions. Laboratory studies should be confirmed by clinical trials.