Extraction of organic pigments from tomato (Solanum lycopersicum L.), turmeric (Curcuma longa L.) and red amaranth (Amaranthus tricolor L.) for safe use in agro-products.

The utilization of synthetic dyes in food industries is a great concern for food safety and health issues. So, natural pigments can be an excellent substitute for synthetic dyes and also health-friendly for consumers. In the experiment, natural pigments were extracted from tomato (Solanum lycopersicum L.), turmeric (Curcuma longa L.) and red amaranth (Amaranthus tricolor L.). Then the stability and consumer acceptance of the extracted pigments were examined. The highest amount of pigment was extracted from turmeric (2.14 ± 0.30 %) with ethanol solvent, followed by tomato (0.67 ± 0.06 %) with hexane: acetone (1:1) solvent, and red amaranth (0.78 ± 0.05 %) with acetone solvent. Turmeric pigment showed the highest stability in high temperatures and light exposure. All of the pigments were highly stable in a neutral environment; however, tomato pigment showed the highest stability index (84.33 ± 2.52) at pH 3.0, but turmeric pigment showed the highest stability (91.67 ± 1.53) at pH 5.0. The simple preference test revealed that the use of turmeric pigment in boiled rice had the highest acceptance rate, and in terms of taste and flavor, red amaranth pigments in ice cream. So turmeric pigment can be utilized in high-temperature processing and/or acidic foods, but tomato and red amaranth pigments might be in low-temperature processing foods such as the ice-cream and soft drinks processing industry.

Fabrication, Characterization, and In Vitro Cytotoxicity Assessment of Tri-Layered Multifunctional Scaffold for Effective Chronic Wound Healing.

Chronic wounds have been a global health risk that demands intensive exploration. A tri-layered biomaterial scaffold has been developed for skin wounds. The top layer of the scaffold is superhydrophobic, and the bottom layer is hydrophilic, both of which were electrospun using recycled expanded polystyrene (EPS) and monofilament fishing line (MFL), respectively. The intermediate layer of the scaffold comprised hydrogel by cross-linking chitosan (CS) with polyethylene glycol. The surface morphology, surface chemistry, thermal degradation, and wettability characteristics of each layer of the scaffold were examined. Also, the antibacterial activity and in vitro cytotoxicity study on the combined tri-layered scaffold were assessed against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). Data revealed exceptional water repellency of the heat-treated electrospun top superhydrophobic layer (TSL) with a high-water contact angle (WCA) of 172.44°. A TSL with 15 wt% of micro-/nano-inclusions had the best thermal stability above 400 °C. The bottom hydrophilic layer (BHL) displayed a WCA of 9.91°. Therapeutically, the synergistic effect of the combined tri-layered scaffold significantly inhibited bacteria growth by 70.5% for E. coli and 68.6% for S. aureus. Furthermore, cell viability is enhanced when PEG is included as part of the intermediate CS hydrogel layer (ICHL) composition.

Photocatalytic degradation of chlorazol yellow dye under sunlight irradiation using Ce, Bi, and N co-doped TiO2 photocatalyst in neutral medium.

Chlorazol yellow (CY) is a commonly used anionic, toxic, mutagenic, and potentially carcinogenic azo dye, which is menacing to the environment, aquatic system, food chain, and human health as well. To remove CY dye molecules from an aqueous medium, a series of Ce, Bi, and N co-doped TiO2 photocatalysts were prepared by varying the composition of the dopants. Under sunlight irradiation, the resultant 5 wt% (Ce-Bi-N) co-doped TiO2 composite catalyst was found to show the best catalytic activity. Hence, the required characterization of this catalyst was performed systematically using energy-dispersive X-ray spectroscopy (EDX), scanning electron microscope (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) techniques. From the thorough investigation, it is revealed that the CY molecules reached adsorption-desorption equilibrium onto the surface of the catalyst within 30 min following second-order kinetics. Herein, the catalyst attained 97% degradation when exposed to sunlight at neutral (pH ~ 7, [CY] = 5 mg L-1) medium. The developed catalyst can destruct CY molecules with a maximum rate of 23.1 µg CY g-1 min-1 and the photodegradation kinetics follows first-order kinetics below 23.5 mg L-1, a fractional order between 23.5 and 35.0 mg L-1, and a zeroth order above 35.0 mg L-1 of CY concentration. Finding from scavenging effect implies that [Formula: see text] and [Formula: see text] radicals have significant influence on the degradation. A suitable mechanism has been proposed with excellent stability and verified reusability of the proposed photocatalyst.

Nanostructured Hybrid Hydrogels for Solar-Driven Clean Water Harvesting from the Atmosphere.

The scarcity of useable water is severe and increasing in several regions of the Middle East, Central and Southern Asia, and Northern Africa. However, the earth's atmosphere contains 37.5 million billion gallons of water in the invisible vapor phase with fast replenishment. The United Nations Convention to Combat Desertification reports that by 2025 about 2.4 billion people will suffer from a lack of access to safe drinking water. Extensive research has been conducted during the last two decades to develop nature-inspired nanotechnology-based atmospheric water-harvesting technology (atmospheric water generator, AWG) to provide clean water to humanity. However, the performance of this technology is humidity sensitive, particularly when the relative humidity (RH) is high (>~80% RH). Moreover, the fundamental design principle of the materials system for harvesting atmospheric water is mostly unknown. In this work, we present a promising technology for solar energy-driven clean water production in arid and semi-arid regions and remote communities. A polymeric electrospun hybrid hydrogel consisting of deliquescent salt (CaCl2) and nanomaterials was fabricated, and the atmospheric water vapor harvesting capacity was measured. The harvested water was easily released from the hydrogel under regular sunlight via the photothermal effect. The experimental tests of this hybrid hydrogel (PAN/AM/graphene/CaCl2) demonstrated the feasibility of around 1.04 L of freshwater production per kilogram of the hydrogel (RH 60%). The synergistic effect enabled by photothermal materials and deliquescent salt in the hydrogel network architecture presents controllable interaction with water molecules, simultaneously realizing efficient water harvesting. This technology requires no additional input of energy. When considering the global environmental challenges and exploring the available technologies, a sustainable clean water supply for households, industry, and agriculture can be achieved from the air using this economical and practical technology.

A Highly Efficient and Stable Photocatalyst; N-Doped ZnO/CNT Composite Thin Film Synthesized via Simple Sol-Gel Drop Coating Method.

The thin film of N-doped ZnO/CNT nanocomposite was successfully fabricated on soda lime glass substrate by a simple sol-gel drop-coating method. The structural, morphological, chemical, and optical properties of as prepared samples were characterized by a variety of tools such as X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM), Fourier Transform Infrared spectroscopy (FT-IR), and UV-visible spectroscopy. The hexagonal crystalline structure was confirmed from XRD measurement without any other impurity phase detection in samples. The N-doped ZnO/CNT composite showed excellent photo-catalytic activity towards cationic methylene blue (MB) dye degradation with 100% removal rate under UV light irradiation as compared to N-doped ZnO (65%) and pure ZnO (47.36%). The convincing performance has also been observed for the case of visible light irradiation. The enhancement of that photocatalytic activity might be due to narrowing the band gap as well as the reduction of electron-hole pair recombination in ZnO matrix with the incorporation of dopant nitrogen and CNT. It is assumed from the obtained results that N-doped ZnO/CNT nanocomposite thin film can be employed as an economically achievable and ecofriendly method to degrade dye with UV and visible light irradiation. Additionally, density functional theory (DFT) calculations were applied to explore the effect of N-doping on electronic structure of ZnO. The computational study has supported the experimental results of significant band gap contraction, which leads to the maximum absorption towards higher wavelength and no appreciable change of lattice parameters after doping. A conceivable photocatalytic mechanism of N-doped ZnO/CNT nanocomposite has been proposed as well.

Fabrication and Biological Analysis of Highly Porous PEEK Bionanocomposites Incorporated with Carbon and Hydroxyapatite Nanoparticles for Biological Applications.

Bone regeneration for replacing and repairing damaged and defective bones in the human body has attracted much attention over the last decade. In this research, highly porous polyetheretherketone (PEEK)/hydroxyapatite (HA) bionanocomposite scaffolds reinforced with carbon fiber (CF) and carbon nanotubes (CNTs) were fabricated, and their structural, mechanical, and biological properties were studied in detail. Salt porogen (200-500 µm size) leaching methods were adapted to produce porous PEEK structures with controlled pore size and distribution, facilitating greater cellular infiltration and biological integration of PEEK composites within patient tissue. In biological tests, nanocomposites proved to be non-toxic and have very good cell viability. In addition, bone marrow cell growth was observed, and PEEK/HA biocomposites with carbon particles showed increased cell attachment over the neat PEEK/HA composites. In cell viability tests, bionanocomposites with 0.5 wt% CNTs established good attachment of cells on disks compared to neat PEEK/HA biocomposites. A similar performance was seen in culture tests of bone marrow cells (osteoblasts and osteoclasts). The 0.5 wt% CF for osteoblasts and 1 wt% CNTs for osteoclasts showed higher cell attachment. The addition of carbon-based nanomaterials into PEEK/HA has been identified as an effective approach to improve cell attachment as well as mechanical and biological properties. With confirmed cell attachment and sustained viability and proliferation of the fabricated PEEK/HA/CNTs, CF bionanocomposites were confirmed to possess excellent biocompatibility and will have potential uses in bone scaffolding and other biomedical applications.

Mechanical properties of highly porous PEEK bionanocomposites incorporated with carbon and hydroxyapatite nanoparticles for scaffold applications.

Bone regeneration is of great importance worldwide, because of various bone diseases, such as infections, tumors, and resultant fracture, birth defects, and bone loss due to trauma, explosion, or accident. Bone regeneration can be achieved by several materials and templates manufactured through various fabrication techniques. Uses of different materials and scaffold fabrication techniques have been explored over the past 20 years. In this research, polyetheretherketone (PEEK) was used to fabricate highly porous bionanocomposite foams for bone scaffolding. Melt casting and salt porogen (200-500 µm size) leaching methods were adapted to create an adequate pore size and the necessary percent of porosity, because pore size plays a vital role in cell implantation and growth. Porosity (75% and 85%) of the prepared scaffolds was adjusted by changing salt concentrations in the PEEK powder. Hydroxyapatite (HA) and carbon particles were used to improve cell attachments and interactions with the porous PEEK and to increase the mechanical properties of the scaffold materials. Carbon fiber (CF) and carbon nanotubes (CNTs) were uniformly dispersed into the PEEK powder before melt casting to enhance the mechanical properties and to observe the influence of the carbon particles on the properties of PEEK bionanocomposite foam. Compression test results of the fabricated bionanocomposites showed that HA and carbon particles are the potential filler materials for the enhancement of bionanocomposite mechanical properties. About 186% enhancement of compression modulus and 43% enhancement of yield strength were observed while incorporating only 0.5 wt% of CNTs into PEEK/HA bionanocomposites having 75% porosity, compared to PEEK/HA 20 wt% bionanocomposites. Micro-computed tomography (micro-CT) test results reveal that pore size and interconnectivity of the nanocomposite foams are in order and within the designed sizes. Mechanical tests proved that PEEK bionanocomposite foam has the potential for use in bone scaffolding and other biomedical applications.

Biodegradation of reactive textile dye Novacron Super Black G by free cells of newly isolated Alcaligenes faecalis AZ26 and Bacillus spp obtained from textile effluents.

Bacteria were isolated from effluents of textile industries and screened by their capability to decolorize at least one of eight reactive dyes used in the textile industries. Three isolates having the capability to decolorize the highest number of dyes with more than 25% of decolorization were identified as Alcaligenes faecalis AZ26, Bacillus cereus AZ27 and Bacillus sp. AZ28 based on morphological, cultural, biochemical characteristics, and 16S rDNA sequence analysis. The decolorization capability of these three bacterial isolates was optimized under different physicochemical conditions by using Novacron Super Black G (NSB-G), one of the eight reactive dyes commonly used in textile industries. These bacterial isolates grew well in the presence of up to 500 mg L-1 of NSB-G and showed decolorization of approximately 90% at 200 mg L-1 of NSB-G after 96 h of cultivation at 37 °C and pH 8.0 under static condition. Decolorization of NSB-G by the bacterial isolates was investigated using UV-VIS spectrophotometry and Fourier Transform Infrared Spectroscopy (FTIR) analysis. The UV-visible absorbance spectra and the FTIR spectrum of the decolorized NSB-G significantly differed from those of the parent dye, indicating that the NSB-G was degraded by the bacterial isolates. High decolorization extent supports the notion that the bacterial isolates reported herein might have potential in the biological treatment of dyeing mill effluents.

A comprehensive analysis of trends and determinants of HIV/AIDS knowledge among the Bangladeshi women based on Bangladesh Demographic and Health Surveys, 2007-2014.

BACKGROUND: South-Asian countries are considered to be a potential breeding ground for HIV epidemic. Although the prevalence of this incurable disease is low in Bangladesh, women still have been identified as more vulnerable group. The aim of this study is to assess the knowledge about HIV/AIDS: its trends and associated factors among the women in Bangladesh. METHODS: We analysed the nationally representative repeatedly cross-sectional Bangladesh Demographic and Health Surveys (BDHSs) data: 2007, 2011, and 2014. These data were clustered in nature due to the sampling design and the generalized mixed effects model is appropriate to examine the association between the outcome and the explanatory variables by adjusting for the cluster effect. RESULTS: Overall, women's knowledge about HIV/AIDS has been decreasing over the years. Education plays the leading role and secondary-higher educated women are 6.6 times more likely to have HIV/AIDS knowledge. The likelihood of knowledge is higher among the women who had media exposure (OR: 1.6) and knowledge on family planning (OR: 2.3). A rural-urban gap is noticed in women's knowledge about HIV/AIDS and significant improvement has been observed among the rural and media exposed women. Results reveal that age, region, religion, socio-economic status, education, contraceptive use have significant (p<0.01) effects on women's knowledge about HIV/AIDS. CONCLUSION: This study recommends to emphasis more on women's education, media exposure, and family planning knowledge in strengthening women's knowledge about HIV/AIDS. In addition, residence specific programs regarding HIV/AIDS awareness also need to be prioritized.