Self-Polarized P(VDF-TrFE)/Carbon Black Composite Piezoelectric Thin Film.

Self-polarized energy harvesting materials have seen increasing research interest in recent years owing to their simple fabrication method and versatile application potential. In this study, we systematically investigated self-polarized P(VDF-TrFE)/carbon black (CB) composite thin films synthesized on flexible substrates, with the CB content varying from 0 to 0.6 wt.% in P(VDF-TrFE). The presence of -OH functional groups on carbon black significantly enhances its crystallinity, dipolar orientation, and piezoelectric performance. Multiple characterization techniques were used to investigate the crystalline quality, chemical structure, and morphology of the composite P(VDF-TrFE)/CB films, which indicated no significant changes in these parameters. However, some increase in surface roughness was observed when the CB content increased. With the application of an external force, the piezoelectrically generated voltage was found to systematically increase with higher CB content, reaching a maximum value at 0.6 wt.%, after which the sample exhibited low resistance. The piezoelectric voltage produced by the unpoled 0.6 wt.% CB composite film significantly exceeded the unpoled pure P(VDF-TrFE) film when subjected to the same applied strain. Furthermore, it exhibited exceptional stability in the piezoelectric voltage over time, exceeding the output voltage of the poled pure P(VDF-TrFE) film. Notably, P(VDF_TrFE)/CB composite-based devices can be used in energy harvesting and piezoelectric strain sensing to monitor human motions, which has the potential to positively impact the field of smart wearable devices.

Low-Power AlGaN/GaN Triangular Microcantilever for Air Flow Detection.

This paper investigates an AlGaN/GaN triangular microcantilever with a heated apex for airflow detection utilizing a very simple two-terminal sensor configuration. Thermal microscope images were used to verify that the apex region of the microcantilever reached significantly higher temperatures than other parts under applied voltage bias. The sensor response was found to vary linearly with airflow rate when tested over a range of airflow varying from 16 to 2000 sccm. The noise-limited flow volume measurement yielded ~4 sccm resolution, while the velocity resolution was found to be 0.241 cm/s, which is one of the best reported so far for thermal sensors. The sensor was able to operate at a very low power consumption level of ~5 mW, which is one of the lowest reported for these types of sensors. The intrinsic response time of the sensor was estimated to be on the order of a few ms, limited by its thermal properties. Overall, the microcantilever sensor, with its simple geometry and measurement configurations, was found to exhibit attractive performance metrics useful for various sensing applications.

Voltage triggered near-infrared light modulation using VO2 thin film.

Development of compact and fast modulators of infrared light has garnered strong research interests in recent years due to their potential applications in communication, imaging, and sensing. In this study, electric field induced fast modulation near-infrared light caused by phase change in VO2 thin films grown on GaN suspended membranes has been reported. It was observed that metal insulator transition caused by temperature change or application of electric field, using an interdigitated finger geometry, resulted in 7% and 14% reduction in transmitted light intensity at near-infrared wavelengths of 790 and 1550 nm, respectively. Near-infrared light modulation has been demonstrated with voltage pulse widths down to 300 µs at 25 V magnitude. Finite element simulations performed on the suspended membrane modulator indicate a combination of the Joule heating and electric field is responsible for the phase transition.