Electrostatic Selectivity of Volatile Organic Compounds Using Electrostatically Formed Nanowire Sensor.

For the past several decades, there is growing demand for the development of low-power gas sensing technology for the selective detection of volatile organic compounds (VOCs), important for monitoring safety, pollution, and healthcare. Here we report the selective detection of homologous alcohols and different functional groups containing VOCs using the electrostatically formed nanowire (EFN) sensor without any surface modification of the device. Selectivity toward specific VOC is achieved by training machine-learning based classifiers using the calculated changes in the threshold voltage and the drain-source on current, obtained from systematically controlled biasing of the surrounding gates (junction and back gates) of the field-effect transistors (FET). This work paves the way for a Si complementary metal-oxide-semiconductor (CMOS)-based FET device as an electrostatically selective sensor suitable for mass production and low-power sensing technology.

Control of the Intrinsic Sensor Response to Volatile Organic Compounds with Fringing Electric Fields.

The ability to control surface-analyte interaction allows tailoring chemical sensor sensitivity to specific target molecules. By adjusting the bias of the shallow p-n junctions in the electrostatically formed nanowire (EFN) chemical sensor, a multiple gate transistor with an exposed top dielectric layer allows tuning of the fringing electric field strength (from 0.5 × 107 to 2.5 × 107 V/m) above the EFN surface. Herein, we report that the magnitude and distribution of this fringing electric field correlate with the intrinsic sensor response to volatile organic compounds. The local variations of the surface electric field influence the analyte-surface interaction affecting the work function of the sensor surface, assessed by Kelvin probe force microscopy on the nanometer scale. We show that the sensitivity to fixed vapor analyte concentrations can be nullified and even reversed by varying the fringing field strength, and demonstrate selectivity between ethanol and n-butylamine at room temperature using a single transistor without any extrinsic chemical modification of the exposed SiO2 surface. The results imply an electric-field-controlled analyte reaction with a dielectric surface extremely compelling for sensitivity and selectivity enhancement in chemical sensors.

Electrostatic Limit of Detection of Nanowire-Based Sensors.

Scanning gate microscopy is used to determine the electrostatic limit of detection (LOD) of a nanowire (NW) based chemical sensor with a precision of sub-elementary charge. The presented method is validated with an electrostatically formed NW whose active area and shape are tunable by biasing a multiple gate field-effect transistor (FET). By using the tip of an atomic force microscope (AFM) as a local top gate, the field effect of adsorbed molecules is emulated. The tip induced charge is quantified with an analytical electrostatic model and it is shown that the NW sensor is sensitive to about an elementary charge and that the measurements with the AFM tip are in agreement with sensing of ethanol vapor. This method is applicable to any FET-based chemical and biological sensor, provides a means to predict the absolute sensor performance limit, and suggests a standardized way to compare LODs and sensitivities of various sensors.