Microplastic pollution in the Chapora River, Goa, Southwest India: spatial distribution and risk assessment.

The amount of information available on the microplastic (MP) contamination in Goa's riverine water systems is currently limited. The abundance, size, colour, and polymer composition of microplastics in Chapora River surface water were investigated in this study. MPs in Chapora River surface water ranged from 0.1 particles/L (station 13) to 0.47 particles/L (station 5). The mean (± standard deviation) MP concentration was 0.25 (± 0.13) particles/L. Fibre was the dominant shape (77.15%), followed by fragments (12.36%), films (9.36%), and foam (1.12%). Most MPs were found in the 0.1-0.3 mm size range, then in the 0.3-1 mm and 1-5 mm. The dominant type of polymer studied was polyethylene terephthalate (PET; 46%), followed by high-density polyethylene (HDPE; 14%), polypropylene (PP; 5%), and polystyrene (PS; 1%). The risk assessment study indicated high risk with respect to PHI, while PLI shows low risk in the area. The source of MPs was mostly anthropogenic in nature in the region. When compared with other tropical rivers, MP pollution was relatively lower in the Chapora River. Nevertheless, the baseline data will help the local administration take mitigation measures to reduce the impact of MP pollution in the region.

Microplastics in Scylla Serrata: A baseline study from southwest India.

Scylla serrata plays a crucial role in India's seafood exports yet there exists limited understanding on the occurrence of microplastics (MPs) in these crabs. In this baseline study, we examined the presence of microplastics in the digestive tracts of S. serrata collected from the Kota mangroves, southwestern coast of India. Our analysis revealed the presence of 264 MPs in all the samples with an average (± standard deviation) of 29.33 (±11.53) MPs/Individual. The most dominant categories were fibres (98.86 %) and fragments (1.14 %). Primarily 0.1-0.3 mm (50.90 %) and 0.3-1 mm (37.65 %) size range dominated. The predominant polymers were polypropylene (33.71 %), high-density polyethylene (31.44 %), and polyethylene terephthalate (17.80 %). Scanning electron microscopy revealed extensive weathering on the surface of the microplastics. Risk assessments indicated severe risks to S. serrata due to microplastic ingestion emphasizing the need to protect delicate ecosystems like mangroves and the biota within.

Microplastics in the marine environment of St. Mary's Island: implications for human health and conservation.

Microplastics have now been identified as a class of emerging pollutants and is considered as a threat to aquatic organisms. This baseline paper investigated the distribution, composition, and potential ecological risks of microplastic (MP) pollution on St. Mary's Island, revealing an average abundance of 0.218 particles/L in water samples. Blue fibres and white foams were the primary MPs identified, and fishing activities and packaging were the main sources of pollution. Six types of polymers were identified: low-density polyethylene (LDPE), polystyrene (PS), polyamide (PA), polypropylene (PP), polyethylene (PE), and high-density polyethylene (HDPE). The Polymer Hazard Index (PHI) and Potential Ecological Risk Index (PERI) indicated a medium environmental risk for the island. Additionally, it was discovered that MPs' surfaces contained dangerous substances that could endanger aquatic life. The research emphasizes the significance of implementing measures such as responsible disposal, management, elimination, regulatory policies, and local administration techniques to mitigate the impact of MP pollution on the island's shores and marine biota. This research provides a baseline for monitoring MP contamination and underscores the need for continuous investigation to assess their impacts on marine life.

Exploring the presence and distribution of microplastics in subterranean estuaries from southwest India.

Rivers, surface runoff, and the wind all transport microplastics (MPs) to the ocean. There is a knowledge gap concerning the distribution of microplastics in transitional subterranean estuaries. Here, we report the presence of microplastics in the pore water, groundwater, and sea water from four locations in southwest India. Pore water, groundwater, and seawater had mean MP abundances (± standard deviations) of 0.75 (±0.66), 0.15 (±0.1), and 0.11 (±0.07) MPs/l, respectively. Fibres were the dominant category of MPs found. Fourier-transformed infrared spectroscopy revealed the presence of polymers like polyester, low-density polyethylene, and polystyrene. Possible sources of microplastic are fishing activities, tourism, and coastal residents. The microplastics-derived risk assessment scores indicate severe risk to the ecosystems. Fibrous microplastics in pore water indicate that these linear particles can migrate vertically through sandy sediments, reaching subterranean estuaries. We believe submarine groundwater discharge can act as a possible pathway for microplastics to enter the oceans.

A baseline study of microplastic pollution in a Southern Indian Estuary.

Knowledge on the processes controlling the vertical distribution of microplastics (MPs) in estuaries is less. This research was carried out to determine the MP distribution in the surface, middle, and bottom layers of the Udyavara River Estuary in southwest India. The mean (± standard deviation) concentrations were 320.83 (± 98.30), 514.55 (± 352.16), and 755.03 (± 400.96) particles/m3, respectively. Fibres, films, and fragments dominated, and 57 % of the MPs had a size range of 0.3-1 mm, while 43 % had a size of 1-5 mm. The main polymers were high-density polyethylene and polyethylene terephthalate. A positive correlation (r = 0.421, p = 0.0205, n = 30) exists between the MPs and salinity, suggesting that the MPs are held by dense saline waters. The mean pollution load index value was 2.25 indicating severe pollution. Microplastic pollution is due to harbour, fishing, industrial activities, the effects of southwest monsoon rain, and tidal currents.

Hidden problems in geological heritage sites: The microplastic issue on Saint Mary's Island, India, Southeast Arabian Sea.

Microplastics (MPs) have become a dominant constituent of several oceanic islands. This study focuses on the occurrence and distribution of MPs present in the beach sediments of Saint Mary's Island (SMI), a geological heritage site located in the south-eastern part of the Arabian Sea. The average (standard deviation) abundance of MPs on this island was 97.18 (80.49) particles/kg. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy revealed that MPs are composed of high-density polyethylene (HDPE), low-density polyethylene (LDPE), polyethylene (PE), polypropylene (PP), polystyrene (PS), and polyamide (PA). Scanning Electron Microscopy (SEM) and Energy-Dispersive X-ray Spectroscopy (EDS) highlighted the presence of Cr, As, Pb, and Cd (harmful pollutants) on MP surfaces. The MPs in the SMI are largely contributed by the nearby fishing harbour, touristic beaches and estuaries. The results of this study, act as a starting point for continuous environmental monitoring in this unique region of the world.

Seasonal variations in the abundance and distribution of microplastic particles in the surface waters of a Southern Indian Lake.

Hazardous anthropogenic particles, such as microplastics (MPs) in the lake ecosystems, are a serious concern. In this work, we have investigated the seasonal occurrence and distribution of microplastics in the surface water samples of Lake Manipal in southwest India. The concentration of MPs was found to be higher during the monsoon season (0.423 particles/L) in comparison with the post-monsoon (0.117 particles/L) period. The higher abundance is attributed to the input of storm-water sewers connected to the lake as well as surface runoff during periods of high rainfall. The concentrations of small-sized (0.3-1 mm) microplastics were greater in both seasons. Approximately 96% of the microplastics were fibres, followed by smaller amounts of fragments, pellets, films, and foams. Polyethylene terephthalate (PET) was the principal polymer composition of the microplastics, followed by cellulose. The PET and cellulose fibres were mainly derived from the laundering of clothes in the residential colonies and hostels situated close to the lake. The storm-water sewers were the likely conduit for these PET fibres into the lake. The Pollution Load Index (PLI) data reveals that pollution due to microplastics in Lake Manipal falls within the Level I risk category. The PLI was higher during the monsoon season due to an increased flux of these particles from the nearby region. During the post-monsoon period, the PLI values decreased, suggesting that MPs in the water column may have settled and mixed with the sediments. The baseline data generated in this study is important as different types of birds, amphibians, and other microorganisms are present in the environment of Lake Manipal. We also propose certain policy measures that can be adopted by the regional population to mitigate microplastic pollution in the lake and its vicinity.