Effects of pasture renovation on hydrology, nutrient runoff, and forage yield.

Proper pasture management is important in promoting optimal forage growth and reducing runoff and nutrient loss. Pasture renovation is a management tool that improves aeration by mechanically creating holes or pockets within the soil. Pasture renovation was performed before manure application (poultry litter or swine slurry) on different pasture soils and rainfall simulations were conducted to identify the effects of pasture renovation on nutrient runoff and forage growth. Renovation of small plots resulted in significant and beneficial hydrological changes. During the first rainfall simulation, runoff volumes were 45 to 74% lower for seven out of eight renovated treatments, and infiltration rates increased by 3 to 87% for all renovated treatments as compared with nonrenovated treatments. Renovation of pasture soils fertilized with poultry litter led to significant reductions in dissolved reactive P (DRP) (74-87%), total P (TP) (76-85%), and total nitrogen (TN) (72-80%) loads in two of the three soils studied during the first rainfall simulation. Renovation did not result in any significant differences in forage yields. Overall, beneficial impacts of renovation lasted up to 3 mo, the most critical period for nutrient runoff following manure application. Therefore, renovation could be an important best management practice in these areas.

Estimating bulk density in vertically exposed stoney alluvium using a modified excavation method.

Despite many decades of education and refining land-use practices, accelerated stream bank erosion is still prevalent in the United States. Eroding stream banks produce a sediment load to the riverine system and can cause reduced water quality as a result of increased suspended sediment. As total maximum daily loads (TMDLs) for water bodies impaired by turbidity or suspended sediments become more numerous, a simple, in situ field technique will be needed to estimate the bulk density of readily erodible stream bank material so that reasonably accurate sediment loading rates can be estimated. In this study, the excavation/polyurethane-foam technique for estimating total bulk density was applied to vertically exposed alluvium with high coarse-fragment content. Though not previously attempted in vertically exposed alluvium with high coarse-fragment content, the excavation/polyurethane-foam technique appears to provide a reasonably accurate estimate of the total and soil (<2-mm size fraction) bulk density from vertically exposed, alluvial deposits with high coarse-fragment content (i.e., >70%) along eroding stream banks. Obtaining bulk density estimates using this method would facilitate calculation of sediment loading rates to riverine systems with actual field data.