Wetting dynamics and surface energy components of single carbon fibers.

HYPOTHESIS: Measuring contact angles made by liquids around individual carbon fibers (CFs) using the Wilhelmy technique is a conventional method to evaluate their surface properties. However, despite its apparent simplicity, inaccurate measurements of capillary forces and wetted lengths, due to the fineness of the CFs, as well as an improper selection of probe liquids can lead to incorrect contact angle and surface energy calculations, leading to an erroneous characterization of their surface properties. EXPERIMENTS: In this study, dynamic wetting experiments of individual CFs were performed in ethylene glycol, diiodomethane, and formamide based on the Wilhelmy method. Capillary forces exerted on the CFs were recorded and analyzed in detail to calculate reliable dynamic contact angles at different contact-line velocities. The molecular-kinetic theory (MKT) and hydrodynamic approach (HD) were then used to model the experimental data and to obtain static contact angles. FINDINGS: The analysis shows that the experimental data are in good agreement with the linear MKT suggesting that the dominant channel of energy dissipation at the contact line is the contact-line friction. From the predicted static advancing contact angle values, the surface energy components of the CFs could be obtained thus providing a way to characterize their interfacial properties and predict their compatibility with polymer matrices. This study furthermore points out the importance of choosing the correct combination of test fluids to obtain reliable surface energy results.

Flax treatment with strategic enzyme combinations: Effect on chemical fiber composition and ease of fiber extraction.

The effect of treatment of flax with strategic enzyme combinations on the ease of fiber extraction and the chemical fiber composition is reported in this study. To contribute to the increasing demand for bio-based and sustainable materials, it is of great importance to develop optimal enzyme formulations which can replace the yet poorly controlled traditional dew retting process. Regarding the chemical composition of the fiber, enzymatic treatments all resulted in similar improvements, with an enhanced cellulose content of 81 ±â€¯1% after polygalacturonase + xylanase treatment (vs. 64 ±â€¯2% for green fibers). Evaluation of extraction efficiency (EE) showed that several enzyme combinations significantly increased EE in comparison with green fibers. An EE of 23 ±â€¯6% was found for fibers extracted after polygalacturonase + pectinmethylesterase treatment, in comparison with an EE of 11 ±â€¯1% for green fibers. Combinations with three enzymes resulted in a higher reduction of the pectin content of the fibers. The combination of enzymes shows hence promising potential but further evaluation of mechanical performance of fiber reinforced composites is needed.

Enzymatic treatment of flax for use in composites.

Enzymes are highly advantageous compared to dew retting to reach fibers of high and consistent quality. However, no unambiguous insights have been retained from the research, i.e. lacking a clear directive of which enzyme activities are strictly needed. Methods for evaluating enzymatic retting should be standardized, with characterization of chemical, morphological and mechanical properties and analysis of the ease of extraction. Moreover, evaluation should not only be focused on the microscopic level of the fiber but the performance of the resulting composite materials should be assessed as well. The review also covers research challenges for introducing enzymatic treatment in large scale production as well as inherent limitations and economic aspects. Besides their high selectivity and environmentally-friendly processing conditions, applying enzymes may also result in a less severe mechanical post-treatment implying less fiber damage. Moreover, recycling of enzymes and utilization of byproducts may increase the economic feasibility of the process.

Wettability of a Single Carbon Fiber.

Wettability as determined from contact angle measurements is a suitable parameter for characterizing the physical bonding of a polymer matrix and reinforcing fibers, but it is very challenging to measure the capillary force exerted by a probe liquid on a fiber accurately for very fine fibers such as single carbon fibers. Herein, we propose an innovative method for measuring dynamic contact angles with a tensiometer, considering both the intrinsic variability of the carbon fiber diameter and the extremely small amplitude of the capillary forces, allowing the measurement of reliable dynamic contact angles over a large range of contact line velocities. The analysis of the contact angle dynamics by the molecular-kinetic theory permits us to check the relevancy of the measured contact angles and to obtain the static contact angle value, improving the prospect of employing tensiometry to better understand the wetting behavior of carbon fibers.