A subject-specific biomechanical control model for the prediction of cervical spine muscle forces.

BACKGROUND: The aim of the present study is to propose a subject-specific biomechanical control model for the estimation of active cervical spine muscle forces. METHODS: The proprioception-based regulation model developed by Pomero et al. (2004) for the lumbar spine was adapted to the cervical spine. The model assumption is that the control strategy drives muscular activation to maintain the spinal joint load below the physiological threshold, thus avoiding excessive intervertebral displacements. Model evaluation was based on the comparison with the results of two reference studies. The effect of the uncertainty on the main model input parameters on the predicted force pattern was assessed. The feasibility of building this subject-specific model was illustrated with a case study of one subject. FINDINGS: The model muscle force predictions, although independent from EMG recordings, were consistent with the available literature, with mean differences of 20%. Spinal loads generally remained below the physiological thresholds. Moreover, the model behavior was found robust against the uncertainty on the muscle orientation, with a maximum coefficient of variation (CV) of 10%. INTERPRETATION: After full validation, this model should offer a relevant and efficient tool for the biomechanical and clinical study of the cervical spine, which might improve the understanding of cervical spine disorders.

Contribution to FE modeling for intraoperative pedicle screw strength prediction.

Although the use of pedicle screws is considered safe, mechanical issues still often occur. Commonly reported issues are screw loosening, screw bending and screw fracture. The aim of this study was to develop a Finite Element (FE) model for the study of pedicle screw biomechanics and for the prediction of the intraoperative pullout strength. The model includes both a parameterized screw model and a patient-specific vertebra model. Pullout experiments were performed on 30 human cadaveric vertebrae from ten donors. The experimental force-displacement data served to evaluate the FE model performance. µCT images were taken before and after screw insertion, allowing the creation of an accurate 3D-model and a precise representation of the mechanical properties of the bone. The experimental results revealed a significant positive correlation between bone mineral density (BMD) and pullout strength (Spearman ρ = 0.59, p < 0.001) as well as between BMD and pullout stiffness (Spearman ρ = 0.59, p < 0.001). A high positive correlation was also found between the pullout strength and stiffness (Spearman ρ = 0.84, p < 0.0001). The FE model was able to reproduce the linear part of the experimental force-displacement curve. Moreover, a high positive correlation was found between numerical and experimental pullout stiffness (Pearson ρ = 0.96, p < 0.005) and strength (Pearson ρ = 0.90, p < 0.05). Once fully validated, this model opens the way for a detailed study of pedicle screw biomechanics and for future adjustments of the screw design.