3D-validation of a simple tool to measure tibiofemoral axial rotation in tibial plateau fractures.

OBJECTIVES: Rotated tibial plateau fractures (TPF) frequently involve multiple planes of movement, yet current presurgical assessment methods do not account for tibiofemoral axial rotation. This study introduces and validates a simple tool to measure rotation-the Gerdy-Tibial-Tuberosity-Surgical-Epicondylar-Axis (GTT-SEA) angle. METHODS: Forty-seven preoperative 2D CT from a TPF database at a tertiary trauma center were retrieved, and 3D models reconstructed. Three observers made repeated 2D and 3D measurements of the GTT-SEA angle, spaced 4 weeks apart, for 20 patients. Inter- and intra-observer agreement and 2D-3D correlation were calculated. A reference angle was defined from non-operated patients, to classify 28 patients with MRI into neutral, external rotation, and internal rotation groups. The classification agreement and soft tissue involvement between groups were analyzed. RESULTS: Mean 2D GTT-SEA angle was 17.65 ± 2.36° in non-operated patients, and 13.86 ± 3.90° in operated patients. 3D GTT-SEA angle was 18.92 ± 4.53° in non-operated patients, and 14.76 ± 6.03° in operated patients. 2D-3D correlation was moderate to good (ICC 0.64 ~ 0.83). Two-dimensional (ICC 0.70) and 3D (ICC 0.55) inter-observer agreements were moderate; 2D (ICC 0.82 ~ 0.88) and 3D (ICC 0.76 ~ 0.95) intra-observer agreements were good to excellent. Rotation classification agreement was slight (kappa 0.17) for 2D and good (kappa 0.76) for 3D. More popliteofibular ligament injury was detected in rotated knees (p = 0.016). CONCLUSIONS: The GTT-SEA angle offers simple, accessible, yet reliable measurement of tibiofemoral axial rotation. Though a true reference range remains to be determined, this tool adds valuable information to existing TPF classifications, potentially allowing assessment of soft tissue involvement in TPF. CLINICAL RELEVANCE STATEMENT: The GTT-SEA angle will benefit patients who sustain tibial plateau fractures, by allowing physicians to more accurately measure and plan for the injury in 3D, and raising suspicion for otherwise undetected soft tissue injuries, which can impact operative outcomes. KEY POINTS: • Traumatic fractures of the tibial plateau may contain rotation-induced soft tissue injuries. • A new tool to measure axial rotation between the femur and tibia was found to have moderate to excellent inter- and intra-rater reliability. • The tool may have potential in predicting soft tissue injury and assisting with the decision to receive MRI.

Anatomical variation in humeri: gender and side comparison using statistical shape modelling.

PURPOSE: The surgical management of proximal humeral fractures remains challenging. Anatomical reduction of the fracture has been reported as the keystone for a sufficient surgical fixation and successful outcome. However, mostly there is no example of its premorbid state. Literature suggests that the mirrored contralateral side can be used as a reconstruction template. But is this a correct technique to use? The purpose of this study is to define anatomical variation between humeri based on gender and side comparison. METHODS: Two different statistical shape models of the humerus were created and their modes of variation were described. One model contained 110 unpaired humeri. The other model consisted of 65 left and corresponding right humeri. RESULTS: The compactness of the statistical shape model containing 110 humeri showed that two principal components explain more than 95% of the variation and the generalization showed that a random humerus can be described with an accuracy of 0.39 mm. For only three parameters, statistically significant differences were observed between left and right. However, comparing the mean of the different metrics on the humeri of men and women, almost all were significant. CONCLUSION: Since there were only small differences between left and right humeri, using the mirrored contralateral side as a reconstruction template for fracture reduction can be defended. The variable anatomy between men and women could explain why locking plates not always fit to the bone.

Thin patient-specific clavicle fracture fixation plates can mechanically outperform commercial plates: An in silico approach.

Current fixation plates used to operatively stabilize clavicular fractures are suboptimal, leading to reoperation rates up to 53%. Plate irritation, which can be caused by a poor geometric fit and plate thickness, has been found to be an important factor for reoperation. Moreover, muscle attachment sites (MAS) have to be detached occasionally. To improve current surgical clavicle fracture treatment with plate osteosynthesis, a change in plate design is required. The goal of this study was to design a patient-specific clavicle fracture fixation plate that includes geometrical optimization and stiffness determination. Its biomechanical performance has been compared with a commercial plate by examining the geometric fit, anatomical outline, stresses and interfragmentary motion using a finite element analysis with physiological loading and boundary conditions. Evaluation showed a better geometrical fit of the patient-specific plate as well as an improved fracture reduction. Displacements between fracture fragments were lower in case of the patient-specific plate, both when a fracture gap and no fracture gap were present. Results indicate a superior mechanical performance in terms of all investigated outcomes of the patient-specific plate compared to the commercial plate, while better aligning with the patient-specific geometry and without the need for MAS release. Due to the patient-specific geometry and reduced thickness, these fixation plates are expected to decrease the operation time, as intraoperative contouring will become irrelevant, and to decrease reoperation rates as implant irritation will be minimized.

Musculoskeletal modeling-based definition of load cases and worst-case fracture orientation for the design of clavicle fixation plates.

Mechanical performance of clavicle fracture fixation plates is often evaluated using finite element (FE) analysis. Typically, these studies use simplified loading conditions and assume a transversal fracture orientation. However, the loading conditions and fracture orientation influence how the fracture site and thus fixation plate is loaded. In this study, a musculoskeletal model that included the clavicle muscles and scapulohumeral rhythm was defined based on previously published models. The standard OpenSim workflow (inverse kinematics, inverse dynamics, static optimization, and joint reaction analysis) was used to calculate muscle and joint contact forces based on 3D marker data collected in three subjects during seven activities of daily living (ADL). These loading conditions were then applied to a 3D clavicle model with three different fracture orientations and the mean resulting moments on both fragments were calculated to assess fracture stability. Magnitude of glenohumeral contact forces showed good agreement with instrumented shoulder prosthesis data, whereas simulated muscle activations were comparable to experimental EMG data. An oblique fracture orienting from superomedial to inferolateral was the least self-stabilizing. The loading to which the clavicle is exposed during ADL tasks is more complex than the simplified loading conditions typically used as boundary conditions in FE analyses of clavicle fracture fixation plates. Additionally, transversal fractures did not represent the least self-stabilizing fracture orientation, and thus calculated stresses in the plate could be underestimated. Therefore, more complex loading conditions and evaluation of a midshaft fracture running from superomedial to inferolateral is more relevant in FE analyses of midshaft clavicle fracture fixation plates.

The Use of a Vibro-Acoustic Based Method to Determine the Composite Material Properties of a Replicate Clavicle Bone Model.

Replicate bones are widely used as an alternative for cadaveric bones for in vitro testing. These composite bone models are more easily available and show low inter-specimen variability compared to cadaveric bone models. The combination of in vitro testing with in silico models can provide further insights in the evaluation of the mechanical behavior of orthopedic implants. An accurate numerical representation of the experimental model is important to draw meaningful conclusions from the numerical predictions. This study aims to determine the elastic material constants of a commonly used composite clavicle model by combining acoustic experimental and numerical modal analysis. The difference between the experimental and finite element (FE) predicted natural frequencies was minimized by updating the elastic material constants of the transversely isotropic cortical bone analogue that are provided by the manufacturer. The longitudinal Young's modulus was reduced from 16.00 GPa to 12.88 GPa and the shear modulus was increased from 3.30 GPa to 4.53 GPa. These updated material properties resulted in an average natural frequency difference of 0.49% and a maximum difference of 1.73% between the FE predictions and the experimental results. The presented updated model aims to improve future research that focuses on mechanical simulations with clavicle composite bone models.

Anatomical Variation of the Tibia - a Principal Component Analysis.

Conventional anatomically contoured plates do not adequately fit most tibiae. This emphasizes the need for a more thorough morphological study. Statistical shape models are promising tools to display anatomical variations within a population. Herein, we aim to provide a better insight into the anatomical variations of the tibia and tibia plateau. Seventy-nine CT scans of tibiae were segmented, and a principal component analysis was performed. Five morphologically important parameters were measured on the 3D models of the mean tibial shapes as well as the -3SD and +3 SD tibial shapes of the first five components. Longer, wider tibiae are related to a more rounded course of the posterior column, a less prominent tip of the medial malleolus, and a more posteriorly directed fibular notch. Varus/valgus deformations and the angulation of the posterior tibia plateau represent only a small percentage of the total variation. Right and left tibiae are not always perfectly symmetrical, especially not at the level of the tibia plateau. The largest degree of anatomical variation of the tibia is found in its length and around the tibia plateau. Because of the large variation in the anatomy, a more patient-specific approach could improve implant fit, anatomical reduction, biomechanical stability and hardware-related complications.

Why off-the-shelf clavicle plates rarely fit: anatomic analysis of the clavicle through statistical shape modeling.

BACKGROUND: The clavicle presents a large variability in its characterizing sigmoid shape. Prominent and nonproperly fitting fixation plates (FP) cause soft tissue irritation and lead to hardware removal. It is therefore key in FP design to account for shape variations. Statistical shape models (SSMs) have been built to analyze a cluster of complex shapes. The goal of this study was to describe the anatomic variation of the clavicle using SSMs. METHODS: Two different SSMs of the clavicle were created, and their modes of variation were described. One model contained 120 left male and female clavicles. The other model consisted of 76 left and corresponding right clavicles, 41 originating from men and 35 from women. RESULTS: The model of 120 left clavicles showed that 10 modes of variation are necessary to explain 95% of the variation. The most important modes of variation are the clavicle length, inferior-superior bow, and medial and lateral curvature. Statistically significant differences between male and female clavicles were seen in length, sigmoid shape, and medial curvature. Comparison in men between left and right revealed significant differences in length and medial curvature. For women, a statistically significant difference between left and right was only seen in the length. CONCLUSIONS: Although the operative treatment of displaced midshaft clavicular fractures has clear benefits, the variable anatomy of the clavicle often makes it challenging for the surgeon to make the plate fit adequately. Based on the identified variability in the clavicle's anatomy, it seems unlikely that a clavicle plating system can fit the entire population.

Computed Tomography Images of the Scapula Taken With Reduced Dose Can Yield Segmented Models of Sufficient Accuracy: A Pilot Study.

OBJECTIVE: The aim of the study was to investigate the influence of tube current reduction on the segmentation accuracy of the scapula. METHODS: A human cadaver was computed tomography scanned multiple times while reducing tube current amperage. The images were segmented using 2 different segmentation methods (N = 28). Subsequently the scapula was dissected and all soft tissues were removed. An optical laser scan of the dissected scapula was aligned and compared with the segmented meshes of the different computed tomography scans. RESULTS: The mesh accuracy remained fairly constant with diminishing tube currents. All segmented meshes had a larger volume than the reference mesh (n = 27). The mean 3-dimensional deviation varied between 1.17 mm (max) and -0.759 mm (min) and the total mean (SD) 3-dimensional deviation was -0.45 (0.38) mm. Radiation dosages were reduced from 7.1 to 0.3 mSv. CONCLUSIONS: Computed tomography tube current can be largely reduced without losing the surface segmentation accuracy of segmented scapula meshes.