Static and Dynamic Control of Fingerprint Landscapes of Liquid Crystal Network Coatings.

Surface topography variations of liquid crystal networks in their functional coatings provide unique properties in these systems. Chiral-nematic polymer coatings self-organize in a fingerprint texture with the molecular helices parallel to the substrate with alternating domains of molecular units with parallel and perpendicular director orientation as controlled by the concentration of a reactive chiral additive. Driven by surface-tension differences and altered by anisotropic polymerization shrinkage, the coating may form hills and valleys hundreds of nanometers in size with different molecular alignment. The director orientation in the corrugations could be controlled by monomer diffusion during polymerization. Polymerization in the presence of a dichroic dye gives topographic elevations in which the molecules are oriented along the normal. Polymerization by means of a dichroic photoinitiator gives topographic elevations in which the molecules align parallel to the surface. By balancing the monomer diffusion and anisotropic polymerization shrinkage, relatively flat surfaces are also achieved. The different surfaces exhibit distinct topographical deformations when subjected to external stimuli, such as an AC electric field. This method can be universally extended to LC polymers with other alignment configurations.

Angle-Dependent Atomic Force Microscopy Single-Chain Pulling of Adsorbed Macromolecules from Planar Surfaces Unveils the Signature of an Adsorption-Desorption Transition.

The adsorption-desorption behavior of polymer chains is at the heart of macromolecular surface science and technology. With the current developments in atomic force microscopy (AFM), it has now become possible to address the desorption problem from the perspective of a single macromolecule. Here, we report on desorption of single polymer chains on planar surfaces by AFM-based single molecule force spectroscopy (SMFS) as a function of the pulling angle with respect to the surface-normal direction. SMFS experiments were performed in water with various substrates using different polymers covalently attached to the AFM probe tip. End-grafting at the AFM tip was achieved by surface-initiated polymerization using initiator functionalized tips. We found that the desorption force increases with a decreasing pulling angle, i.e., an enhanced adhesion of the polymer chain was observed. The magnitude of the desorption force shows a weak angular dependence at pulling angles close to the surface normal. A significant increase of the force is observed at shallower pulling from a certain pulling angle. This behavior carries the signature of an adsorption-desorption transition. The angular dependence of the normalized desorption force exhibits a universal behavior. We compared and interpreted our results using theoretical predictions for single-chain adsorption-desorption transitions.

Covalent Binding of Bone Morphogenetic Protein-2 and Transforming Growth Factor-ß3 to 3D Plotted Scaffolds for Osteochondral Tissue Regeneration.

Engineering the osteochondral tissue presents some challenges mainly relying in its function of transition from the subchondral bone to articular cartilage and the gradual variation in several biological, mechanical, and structural features. A possible solution for osteochondral regeneration might be the design and fabrication of scaffolds presenting a gradient able to mimic this transition. Covalent binding of biological factors proved to enhance cell adhesion and differentiation in two-dimensional culture substrates. Here, we used polymer brushes as selective linkers of bone morphogenetic protein-2 (BMP-2) and transforming growth factor-ß3 (TGF-ß3) on the surface of 3D scaffolds fabricated via additive manufacturing (AM) and subsequent controlled radical polymerization. These growth factors (GFs) are known to stimulate the differentiation of human mesenchymal stromal cells (hMSCs) toward the osteogenic and chondrogenic lineages, respectively. BMP-2 and TGF-ß3 were covalently bound both homogeneously within a poly(ethylene glycol) (PEG)-based brush-functionalized scaffolds, and following a gradient composition by varying their concentration along the axial section of the 3D constructs. Following an approach previously developed by our group and proved to be successful to generate fibronectin gradients, opposite brush-supported gradients of BMP-2 and TGF-ß3 were finally generated and subsequently tested to differentiate cells in a gradient fashion. The brush-supported GFs significantly influenced hMSCs osteochondral differentiation when the scaffolds were homogenously modified, yet no effect was observed in the gradient scaffolds. Therefore, this technique seems promising to maintain the biological activity of growth factors covalently linked to 3D scaffolds, but needs to be further optimized in case biological gradients are desired.

Biomimicking micropatterned surfaces and their effect on marine biofouling.

When synthetic materials are submerged in marine environments, dissolved matter and marine organisms attach to their surfaces by a process known as marine fouling. This phenomenon may lead to diminished material performance with detrimental consequences. Bioinspired surface patterning and chemical surface modifications present promising approaches to the design of novel functional surfaces that can prevent biofouling phenomena. In this study, we report the synergistic effects of surface patterns, inspired by the marine decapod crab Myomenippe hardwickii in combination with chemical surface modifications toward suppressing marine fouling. M. hardwickii is known to maintain a relatively clean carapace although the species occurs in biofouling communities of tropical shallow subtidal coastal waters. Following the surface analysis of selected specimens, we designed hierarchical surface microtopographies that replicate the critical features observed on the crustacean surface. The micropatterned surfaces were modified with zwitterionic polymer brushes or with layer-by-layer deposited polyelectrolyte multilayers to enhance their antifouling and/or fouling-release potential. Chemically modified and unmodified micropatterned surfaces were subjected to extensive fouling tests, including laboratory assays against barnacle settlement and algae adhesion, and field static immersion tests. The results show a statistically significant reduction in settlement on the micropatterned surfaces as well as a synergistic effect when the microtopographies are combined with grafted polymer chains.

Water swelling, brine soluble imidazole based zwitterionic polymers--synthesis and study of reversible UCST behaviour and gel-sol transitions.

New vinylbenzene substituted imidazole based zwitterionic polymers with unique characteristics like swelling in water and solubility in concentrated brine solution in which they exhibited a reversible upper critical solution temperature (UCST) and gel-sol transitions are reported herein.

Polymer-coated quantum dots.

Quantum Dots (QDs) are semiconductor nanocrystals with distinct photophysical properties finding applications in biology, biosensing, and optoelectronics. Polymeric coatings of QDs are used primarily to provide long-term colloidal stability to QDs dispersed in solutions and also as a source of additional functional groups used in further chemical derivatization of the nanoparticles. We review the coating methods, including multidentate and amphiphilic polymeric coatings, and grafting-to and grafting-from approaches. We highlight the most commonly used polymers and discuss how their chemical structure influences the coating properties.