Preparation of Thermoplastic Cellulose Esters in [mTBNH][OAC] Ionic Liquid by Transesterification Reaction.

The transesterification of cellulose with vinyl esters in ionic liquid media is suggested as a prospective environmentally friendly alternative to conventional esterification. In this study, various long-chain cellulose esters (laurate, myristate, palmitate, and stearate) with a degree of substitution (DS) up to 1.8 have been synthesized in novel distillable ionic liquid, [mTBNH][OAC]. This IL has high dissolving power towards cellulose, which can improve homogeneous transesterification. Additionally, [mTBNH][OAC] has durability towards recycling and can be regenerated and re-used again for the next cycles of esterification. DMSO is used as a co-solvent because of its ability to speed up mass transport due to lower solvent viscosity. The optimization of the reaction parameters, such as co-solvent content, temperature (20-80 °C), reaction time (1-5 h), and a molar ratio of reactants (1-5 eq. AGU) is reported. It was found that within studied reaction conditions, DS increases with increasing reaction time, temperature, and added vinyl esters. Structure analysis using FTIR, 1H, and 13C NMR after acylation revealed the introduction of the alkyl chains into cellulose for all studied samples. The results also suggested that the substitution order of the OH group is C7-O6 > C7-O2 > C7-O3. Unique, complex thermal and rheological investigation of the cellulose esters shows the growth of an amorphous phase upon the degree of substitution. At the same time, the homogeneous substitution of cellulose with acyl chains increases the melt viscosity of a material. Internal plasticization in cellulose esters was found to be the mechanism for the melt processing of the material. Long-chain cellulose esters show the potential to replace commonly used externally plasticized cellulose derivatives.

Covalent Adaptable Polymethacrylate Networks by Hydrazide Crosslinking Via Isosorbide Levulinate Side Groups.

Reversible crosslinking offers an attractive strategy to modify and improve the properties of polymer materials while concurrently enabling a pathway for chemical recycling. This can, for example, be achieved by incorporating a ketone functionality into the polymer structure to enable post-polymerization crosslinking with dihydrazides. The resulting covalent adaptable network contains acylhydrazone bonds cleavable under acidic conditions, thereby providing reversibility. In the present work, we regioselectively prepare a novel isosorbide monomethacrylate with a pendant levulinoyl group via a two-step biocatalytic synthesis. Subsequently, a series of copolymers with different contents of the levulinic isosorbide monomer and methyl methacrylate are prepared by radical polymerization. Using dihydrazides, these linear copolymers are then crosslinked via reaction with the ketone groups in the levulinic side chains. Compared to the linear prepolymers, the crosslinked networks exhibit enhanced glass transition temperatures and thermal stability, up to 170 and 286 °C, respectively. Moreover, the dynamic covalent acylhydrazone bonds are efficiently and selectively cleaved under acidic conditions to retrieve the linear polymethacrylates. We next show that recovered polymers can again be crosslinked with adipic dihydrazide, thus demonstrating the circularity of the materials. Consequently, we envision that these novel levulinic isosorbide-based dynamic polymethacrylate networks have great potential in the field of recyclable and reusable biobased thermoset polymers.

Chemically Recyclable Poly(ß-thioether ester)s Based on Rigid Spirocyclic Ketal Diols Derived from Citric Acid.

Incorporating rigid cyclic acetal and ketal units into polymer structures is an important strategy toward recyclable high-performance materials from renewable resources. In the present work, citric acid, a widely used platform chemical derived from biomass, has been efficiently converted into di- and tricyclic diketones. Ketalization with glycerol or trimethylolpropane afforded rigid spirodiols, which were obtained as complex mixtures of isomers. After a comprehensive NMR analysis, the spirodiols were converted into the respective di(meth)acrylates and utilized in thiol-ene polymerizations in combination with different dithiols. The resulting poly(ß-thioether ester ketal)s were thermally stable up to 300 °C and showed glass-transition temperatures in a range of -7 to 40 °C, depending on monomer composition. The polymers were stable in aqueous acids and bases, but in a mixture of 1 M aqueous HCl and acetone, the ketal functional groups were cleanly hydrolyzed, opening the pathway for potential chemical recycling of these materials. We envision that these novel bioderived spirodiols have a great potential to become valuable and versatile bio-based building blocks for several different kinds of polymer materials.

Lignin-Inspired Polymers with High Glass Transition Temperature and Solvent Resistance from 4-Hydroxybenzonitrile, Vanillonitrile, and Syringonitrile Methacrylates.

We here report on the synthesis and polymerization of nitrile-containing methacrylate monomers, prepared via straightforward nitrilation of the corresponding lignin-inspired aldehyde. The polymethacrylates reached exceptionally high glass transition temperatures (T g values), i.e., 150, 164, and 238 °C for the 4-hydroxybenzonitrile, vanillonitrile, and syringonitrile derivatives, respectively, and were thermally stable up to above 300 °C. Copolymerizations of the nitrile monomers with styrene and methyl methacrylate, respectively, gave potentially melt processable materials with tunable T g values and enhanced solvent resistance. The use of lignin-derived nitrile-containing monomers represents an efficient strategy toward well-defined biobased high T g polymer materials.

Poly(alkanoyl isosorbide methacrylate)s: From Amorphous to Semicrystalline and Liquid Crystalline Biobased Materials.

We have prepared a series of 12 d-isosorbide-2-alkanoate-5-methacrylate monomers as single regioisomers with different pendant linear C2-C20 alkanoyl chains using biocatalytic and chemical acylations. By conventional radical polymerization, these monomers provided high-molecular-weight biobased poly(alkanoyl isosorbide methacrylate)s (PAIMAs). Samples with C2-C12 alkanoyl chains were amorphous with glass transition temperatures from 107 to 54 °C, while C14-C20 chains provided semicrystalline materials with melting points up to 59 °C. Moreover, PAIMAs with C13-C20 chains formed liquid crystalline mesophases with transition temperatures up to 93 °C. The mesophases were studied using polarized optical microscopy, and rheology showed stepwise changes of the viscosity at the transition temperature. Unexpectedly, a PAIMA prepared from a regioisomeric monomer (C18) showed semicrystallinity but not liquid crystallinity. Consequently, the properties of the PAIMAs were readily tunable by controlling the phase structure and transitions through the alkanoyl chain length and the regiochemistry to form fully amorphous, semicrystalline, or semi/liquid crystalline materials.

Biosourced All-Acrylic ABA Block Copolymers with Lactic Acid-Based Soft Phase.

Lactic acid is one of the key biobased chemical building blocks, given its readily availability from sugars through fermentation and facile conversion into a range of important chemical intermediates and polymers. Herein, well-defined rubbery polymers derived from butyl lactate solvent were successfully prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization of the corresponding monomeric acrylic derivative. Good control over molecular weight and molecular weight distribution was achieved in bulk using either monofunctional or bifunctional trithiocarbonate-type chain transfer agents. Subsequently, poly(butyl lactate acrylate), with a relative low Tg (-20 °C), good thermal stability (5% wt. loss at 340 °C) and low toxicity was evaluated as a sustainable middle block in all-acrylic ABA copolymers using isosorbide and vanillin-derived glassy polyacrylates as representative end blocks. Thermal, morphological and mechanical properties of copolymers containing hard segment contents of <20 wt% were evaluated to demonstrate the suitability of rubbery poly(alkyl lactate) building blocks for developing functional sustainable materials. Noteworthy, 180° peel adhesion measurements showed that the synthesized biosourced all-acrylic ABA copolymers possess competitive performance when compared with commercial pressure-sensitive tapes.

SET-LRP of Bio- and Petroleum-Sourced Methacrylates in Aqueous Alcoholic Mixtures.

Single-electron transfer-living radical polymerization (SET-LRP) in "programmed" aqueous organic biphasic systems eliminates the judicious choice of solvent and also provides accelerated reaction rates. Herein, we report efforts to expand the monomer scope for these systems by targeting methacrylic monomers and polymers. Various environmentally friendly aqueous alcoholic mixtures were used in combination with Cu(0) wire catalyst, tris(2-dimethylaminoethyl)amine (Me6-TREN) ligand, and p-toluenesulfonyl chloride (Ts-Cl) initiator to deliver well-defined polymethacrylates from methyl methacrylate, butyl methacrylate, and other monomers derived from biomass feedstock (e.g., lactic acid, isosorbide, furfural, and lauric acid). The effect of water on the nature of the reaction mixture during the SET-LRP process, reaction rate, and control of the polymerization is discussed. The control retained under the reported conditions is demonstrated by synthesizing polymers of different targeted molar mass as well as quasi-block AB copolymers by "in situ" chain extension at high conversion. These results highlight the capabilities of SET-LRP to provide sustainable solutions based on renewable resources.

Route for Conversion of Furfural to Ethylcyclopentane.

A method for conversion of furfural, widely available platform chemical from biomass, to ethylcyclopentane, is reported. Ethylcyclopentane is a cyclic alkane with a relatively high octane number (RON 67, bp 103 °C) and could potentially serve as a drop-in biofuel. The synthetic route includes a transformation of furfural to 1-(furan-2-yl)propan-1-ol that is further subjected to Piancatelli rearrangement to give 5-ethyl-4-hydroxycyclopent-2-en-1-one. The subsequent hydrodeoxygenation affords ethylcyclopentane in 48% isolated yield.

Hydroformylation of Olefinic Derivatives of Isosorbide and Isomannide.

The first time application of hydroformylation on olefinic derivatives of isosorbide and isomannide is shown by which a new carbon-carbon bond is formed. Depending on the ligand and reaction conditions used, the C6 regioisomer a can be obtained in 4:1 ratio and excellent yield, whereas C5 isomer b is achieved in almost complete regioselectivity (46:1) and good yield. In the majority of cases only the exo orientation is observed for the obtained aldehydes, and the method is easily applicable also on a 1 g scale.

An NMR and MD modeling insight into nucleation of 1,2-alkanediols: selective crystallization of lipase-catalytically resolved enantiomers from the reaction mixtures.

The work on developing a scalable lipase-catalytic method for the kinetic resolution of long-chain 1,2-alkanediols, complemented by crystallization of the pure enantiomers from the reaction mixtures, offered the possibility of a more detailed study of the aggregation of such diols. MD modeling, mass spectrometry, (1)H NMR, and DOSY studies provided a novel insight into the nucleation process. An efficient protocol for stereo- and chemoselective crystallization of (S)-1,2-dodecanediol and related compounds from the crude bioconversion mixtures was developed.

Synthesis and quantitative analysis of diastereomeric linked ester conjugates with remote stereocenters using high-field NMR and chiral HPLC.

A stereochemically safe high-yielding procedure for linking unprotected as well as protected hydroxycarboxylic acids to chiral secondary alcohols via glycolic acid linker is proposed. L-menthol has been linked with both enantiomers of mandelic, malic, and methoxyphenylacetic acid using bromo- or iodoacetyl group as a precursor of the glycolic acid linker. High-field nuclear magnetic resonance (NMR) and chiral high-performance liquid chromatography (HPLC) determination of high diastereomeric ratio (dr) (>99%) of the products bearing remote stereocenters was explored. Chiral HPLC allowed quantitation of the diastereomers up to dr 99.9/0.1. High-field NMR quantitation of the diastereomeric and parent alcoholic impurities in esters was demonstrated at the molar 0.3% and 0.03% levels, respectively. These analyses were done via comparison of integral intensities from major component (13)C satellites in (1)H or even in (13)C spectra to the (1)H or (13C signals of impurities. Despite lower sensitivity, the last option generally has much better selectivity. In this way the dynamic resolution is brought down by two orders.

Evaluation of carbohydrates and lignocellulosic biomass from different wood species as raw material for the synthesis of 5-bromomethyfurfural.

The influence of different parameters on the conversion of carbohydrates and biomass into the potential biofuel intermediate 5-bromomethylfurfural (BMF) has been studied. Our optimized conditions avoid the use of lithium salt additives, making this method cheaper and environmentally more benign compared to previously reported methods. Different wood species and their potential as a raw material in BMF and furfural production have also been evaluated. In addition, we report a very simple and efficient procedure for conversion of 5-hydroxymethylfurfural (HMF) into BMF or 5-chloromethylfurfural (CMF).

Substituted 7-amino-5-thio-thiazolo[4,5-d]pyrimidines as potent and selective antagonists of the fractalkine receptor (CX3CR1).

We have developed two parallel series, A and B, of CX3CR1 antagonists for the treatment of multiple sclerosis. By modifying the substituents on the 7-amino-5-thio-thiazolo[4,5-d]pyrimidine core structure, we were able to achieve compounds with high selectivity for CX3CR1 over the closely related CXCR2 receptor. The structure-activity relationships showed that a leucinol moiety attached to the core-structure in the 7-position together with α-methyl branched benzyl derivatives in the 5-position displayed promising affinity, and selectivity as well as physicochemical properties, as exemplified by compounds 18a and 24h. We show the preparation of the first potent and selective orally available CX3CR1 antagonists.

Hydrolytic and aminolytic kinetic resolution of terminal bis-epoxides.

Hydrolytic and aminolytic kinetic resolution of terminal bis-epoxides catalyzed by (salen)Co(III) complexes affords epoxy-diols and N-protected epoxy-amino alcohols with excellent enantio- and diastereoselectivity and good yields. An operationally simple procedure gives instant access to valuable building blocks containing two remote stereocenters in highly enantioenriched form.

Phenolic compounds in five Epilobium species collected from Estonia.

Epilobium species have been traditionally used as medicinal plants to treat benign prostate hyperplasia. The present study investigated the content of polyphenols, tannins, and flavonoids in Epilobium parviflorum Schreb., E. hirsutum L., E. adenocaulon Hausskn., E. montanum L., and E. palustre L. growing in Estonia. The total contents of polyphenols, tannins, and flavonoids were studied using UV spectroscopy with subsequent HPLC quantification of gallic acid, ellagic acid, and quercetin as marker compounds. All roots, stems, leaves, and flowers of the plants investigated contained comparable amounts of polyphenols, tannins, and flavonoids. There was a clear positive correlation between the contents of tannins and flavonoids in various plant parts. The content of these biologically active compounds suggests the use of E. parviflorum, E. hirsutum, E. adenocaulon, E. montanum, and E. palustre collected from Estonia as herbs both individually or as a blend.

Synthesis and supramolecular properties of conformationally restricted and flexible phospholipids.

Short synthetic routes are described to produce structurally related phospholipids that are either conformationally restricted or flexible. The conformationally restricted structures have a cyclopropyl ring in the interfacial region of the phospholipid. The key synthetic step is a cyclopropanation reaction between 2(5H)-furanone and a stabilized chloroallylic phosphonate anion. The synthetic routes enable the incorporation of different polar headgroups as well as nonpolar tails at late stages in the sequence. The phosphoethanolamine derivatives 1b and 2b readily form encapsulating vesicles, however, dye leakage from vesicles composed of the restricted phospholipid 1b is significantly slower than from vesicles composed of flexible analogue 2b. Physicochemical analyses using 31P NMR, differential scanning calorimetry, fluorescence anisotropy, and Langmuir-Blodgett films suggest that the decreased permeability of membranes composed of conformationally restricted 1b is due to its ability to pack more closely in a bilayer assembly.

A versatile stereocontrolled approach to chiral tetrahydrofuran and tetrahydropyran derivatives by use of sequential asymmetric Horner-Wadsworth-Emmons and ring-closure reactions.

An approach to chiral tetrahydrofuran and tetrahydropyran derivatives based on the sequential use of an asymmetric Horner-Wadsworth-Emmons reaction and a cyclization step is presented. The approach is both stereochemically and structurally versatile since three different cyclization methods can be employed starting from the same HWE product: (i) palladium-catalyzed substitution, (ii) hetero-Michael addition, or (iii) epoxide opening. The asymmetric HWE reaction controls the absolute configuration of the ultimate product, whereas the relative configuration is controlled by the combined influence of the geometric selectivity in the HWE reaction and the stereochemistry of the respective cyclization method.

Highly impermeable vesicles composed of conformationally restricted phosphatidylethanolamine.

Vesicles composed of a phosphatidylethanolamine derivative with a cyclopropyl-containing interfacial region are twenty-seven times less permeable than vesicles composed of a closely related analogue.

Cationic triple-chain amphiphiles facilitate vesicle fusion compared to double-chain or single-chain analogues.

Cationic, triple-chain amphiphiles promote vesicle fusion more than structurally related double-chain or single-chain analogues. Two types of vesicle fusion experiments were conducted, mixing of oppositely charged vesicles and acid-triggered self-fusion of vesicles composed of cationic amphiphile and anionic cholesteryl hemisuccinate (CHEMS). Vesicle fusion was monitored by standard fluorescence assays for intermembrane lipid mixing, aqueous contents mixing and leakage. Differential scanning calorimetry was used to show that triple-chain amphiphiles lower the lamellar-inverse hexagonal (L(alpha)-H(II)) phase transition temperature for dipalmitoleoylphosphatidylethanolamine. The triple-chain amphiphiles may enhance vesicle fusion because they can stabilize the inversely curved membrane surfaces of the fusion intermediates, however, other factors such as extended conformation, packing defects, chain motion, or surface dehydration may also contribute. From the perspective of drug delivery, the results suggest that vesicles containing cationic, triple-chain amphiphiles (and cationic, cone-shaped amphiphiles in general) may be effective as fusogenic delivery capsules.