Hierarchical structures on nickel-titanium fabricated by ultrasonic nanocrystal surface modification.

Hierarchical structures on metallic implants can enhance the interaction between cells and implants and thus increase their biocompatibility. However, it is difficult to directly fabricate hierarchical structures on metallic implants. In this study, we used a simple one-step method, ultrasonic nanocrystal surface modification (UNSM), to fabricate hierarchical surface structures on a nickel-titanium (NiTi) alloy. During UNSM, a tungsten carbide ball hits metal surfaces at ultrasonic frequency. The overlapping of the ultrasonic strikes generates hierarchical structures with microscale grooves and embedded nanoscale wrinkles. Cell culture experiments showed that cells adhere better and grow more prolifically on the UNSM-treated samples. Compared with the untreated samples, the UNSM-treated samples have higher corrosion resistance. In addition, the surface hardness increased from 243 Hv to 296 Hv and the scratch hardness increased by 22%. Overall, the improved biocompatibility, higher corrosion resistance, and enhanced mechanical properties demonstrate that UNSM is a simple and effective method to process metallic implant materials.

Surface amorphization of NiTi alloy induced by Ultrasonic Nanocrystal Surface Modification for improved mechanical properties.

We report herein the effects of Ultrasonic Nano-crystal Surface Modification (UNSM), a severe surface plastic deformation process, on the microstructure, mechanical (hardness, wear), wettability and biocompatibility properties of NiTi shape memory alloy. Complete surface amorphization of NiTi was achieved by this process, which was confirmed by X-ray diffraction and high-resolution transmission electron microscopy. The wear resistance of the samples after UNSM processing was significantly improved compared with the non-processed samples due to increased surface hardness of the alloy by this process. In addition, cell culture study demonstrated that the biocompatibility of the samples after UNSM processing has not been compromised compared to the non-processed sample. The combination of high wear resistance and good biocompatibility makes UNSM an appealing process for treating alloy-based biomedical devices.

Roles of surface Te, Nb, and Sb oxides in propane oxidation to acrylic acid over bulk orthorhombic Mo-V-O phase.

The outermost surfaces and subsurface layers of the orthorhombic (M1) Mo-V-O catalysts promoted with Te, Nb, and Sb oxide species at submonolayer surface coverage were examined by low-energy ion scattering (LEIS). This study indicated that the Nb oxide species was preferentially located at the topmost surface, while the subsurface Te and Sb concentrations declined gradually into the bulk. Although the original Mo-V-O catalyst was essentially unselective in propane oxidation to acrylic acid, significant improvement in the selectivity to acrylic acid was observed when Te, Nb, and Sb oxides were present as the surface species at submonolayer coverage. These findings further suggested that the formation of the surface V-O-M bonds (M = Nb, Te, or Sb) was highly beneficial for both the activity and selectivity of the orthorhombic Mo-V-O catalysts in propane oxidation to acrylic acid. The highest selectivity was observed when both Nb and Te (or Sb) oxide species were present at the surface. The selectivity trends established for the surface-promoted Mo-V-O catalyst parallel those found previously for the corresponding bulk Mo-V-M-O catalysts. These results further indicated that the introduction of surface metal oxide species is a highly promising method to prepare well-defined model catalysts for studies of the structure-activity/selectivity relationships as well as optimize the catalytic performance of the bulk mixed Mo-V-M-O catalysts for selective (amm)oxidation of propane.